Skip to the content
2 layers61.5 × 41.5 mmSoundLight, the printed circuit board in 3D

Hardware design files and software for a flexible and portable sound-to-light conversion device.

Size
61.5 × 41.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
24
Nets
17
Pads
88
Tracks, vias
210, 1
Routed
Yes
KiCad
KiCad 4
Created
26 Jul 2018
Updated
28 Apr 2022

Overview

SoundLight is an open-source printed circuit board by onolab-tmu, from the onolab-tmu/blinky repository on GitHub, published under the MIT licence. It is a 2-layer board of 61.5 × 41.5 mm with 24 parts on 17 nets, routed with 210 tracks and 1 via.

It is built around the JS202011SCQN and SDA03H1SBD. Its parts include 8 resistors, 6 connectors, 4 diodes, 2 capacitors and 2 switches. It belongs with the audio and music boards and the ESP32 boards of this library.

Main components

2

README

README.md

Blinky Hardware

Blinky

Blinkies are small electronic devices that make very bright light (usually flashing) light using LEDs and small batteries.

-- Wikipedia

The Blinky is a sound-to-light conversion device. When many blinkies are used together, it becomes possible to do large scale audio array processing by acquiring the light from all devices simultaneously with a camera. We described the devices and a couple of applications in a paper. Applications are, for example

  • Monitoring
  • Speech enhancement
  • Sound source localization in very large and challenging environment
  • Blind Source Separation arxiv

Hardware

The hardware is based on the ESP32 with a custom extension PCB bearing two MEMS microphones and a few LEDs. Details and necessary files are provided in the hardware folder.

Firmwares

The folder firmware contains three different firmwares for the device.

Blinky OTA Firmware

This is our working firmware that we have used for the device in our experiments. It allows to do OTA updates and uses the DIP switch. This firmware reads sound samples from the left microphone, compute the power for frames of 4 ms and apply a non-linear transformation to map the value to the PWM range of the LED. A few of the modes are for calibration only and just sweep the PWM duty cycles of the LED.

Quick Start

This section explains how to get the firmware running in a few commands. For more detailed instructions, including over-the-air (OTA) updates, see firmware/blinky_ota/README.md.

  1. Install the ESP-IDF by following the official instructions (stable) (latest). In case it the first time working with the ESP32, it is recommended to try out a few example projects to learn how to compile and upload firmware to the device.

  2. Build the firmware.

    text
     cd firmware/blinky_ota/firmware
     
     # configure
     #  - serial port
     #  - device number
     #  - wireless network
     make menuconfig
     
     # compile and upload to device
     make flash

Recorder Firmware

This firmware turns the device into a wireless stereo microphone. The instructions to use this firmware are in firmware/recorder/BlinkyRecorder_REAMDE_jp.pdf (japanese only for now).

Blank Firmware

This firmware is a stripped down version of the regular Blinky firmware. Its role is to highlight how to read samples from one or both microphones and control the LEDs.

Software

The python folder contains the blinkytools python package. This package offers a graphical user interface (GUI) to easily capture the signals from multiple Blinkies using a video camera, or from a pre-recorded video.

The package can be install from pypi directly.

text
pip install blinkytools

Authors

  • The board was designed by Evixar under directions from Robin Scheibler.
  • The code was written by Robin Scheibler and Evixar.

License

MIT License for all the software, see `LICENSE.

CC-BY-SA 4.0 for the hardware.

Parts

24
QtyValueFootprintReferences
4100kResistors_SMD:R_0805R5, R6, R7, R8
4Conn_01x01Mounting_Holes:MountingHole_2.2mm_M2_ISO7380_PadJ3, J4, J5, J6
20.1uCapacitors_SMD:C_0805C1, C2
2100Resistors_SMD:R_0805R1, R3
1180Resistors_SMD:R_0805R4
175Resistors_SMD:R_0805R2
1BLEDs:LED_D3.0mmD2
1Conn_01x12Pin_Headers:Pin_Header_Straight_1x12_Pitch2.54mmJ1
1Conn_01x16Pin_Headers:Pin_Header_Straight_1x16_Pitch2.54mmJ2
1GLEDs:LED_D3.0mmD3
1JS202011SCQNevixar:SW_JS202011SCQNS2
1Levixar:MIC_ICS-43432MK1
1RLEDs:LED_D3.0mmD4
1Revixar:MIC_ICS-43432MK2
1SDA03H1SBDevixar:SW_SDA03H1SBDS1
1WLEDs:LED_D3.0mmD1

Similar boards

  • 4 layers165 × 107 mmSpla board, the printed circuit board in 3D

    Spla board

    khaydarian/spla

    SNES PPU Logic Analyzer

    290 parts32
  • 2 layers59.2 × 93.2 mmAws iot expresslink demo badge, the printed circuit board in 3D

    Aws iot expresslink demo badge

    aws/iot-expresslink

    This device was designed and created for the AWS IoT ExpressLink Demo Badge Workshop, which was run at re:Invent 2022.

    74 parts29MIT-0
  • 4 layers92.7 × 76.2 mmDut artix7-a12t, the printed circuit board in 3D

    Dut artix7-a12t

    GMUCERG/fobos

    Flexible Open-source workBench fOr Side-channel analysis (FOBOS)

    199 parts18Apache-2.0
  • 4 layers139.7 × 41.3 mmSchemat, the printed circuit board in 3D

    Schemat

    konrad1s/LineFollower-Kwark

    Fast LineFollower Robot project. Build on STM32 F7 microcontroller with custom PCB. Software, Hardware and QT Application.

    74 parts12MIT
  • 2 layers59.9 × 32.9 mmJelly, the printed circuit board in 3D

    Jelly

    kitspace/jelly

    A jellyfish shaped light-following bristle bot

    39 parts5
  • 2 layers97 × 43.3 mmBSidesSD, the printed circuit board in 3D

    BSidesSD

    ellwoodthewood/BSidesSD

    Badge Project for BSides San Diego

    26 parts4MIT
  • 2 layers45 × 40 mmCircuitPythonBadge v1 2, the printed circuit board in 3D

    CircuitPythonBadge v1 2

    neubauek/CircuitPythonBadge

    Open Source Hardware Circuit Python Badge

    91 parts4
  • 4 layers37 × 26 mmPrototype adc2, the printed circuit board in 3D

    Prototype adc2

    RemkoPr/icra2025-SMI-tactile-sensing

    [Main Paper, Follow-up] The source files in this repo are provided as-is, additional support for recreating the design can be requested, see contact information below.

    59 parts3

Questions

How big is the SoundLight PCB?

It measures 61.5 × 41.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SoundLight use?

24 parts, built around the JS202011SCQN and SDA03H1SBD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SoundLight KiCad files?

From the onolab-tmu/blinky repository on GitHub, at the commit this page was made from: the board is hardware/kicad/SoundLight.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the SoundLight design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).