
LED Matrix Display Badge
0xlama/ATtiny_LED_Matrix_Display_Badge
An ATtiny85 based badge size PCB that can display alphabets and numbers .

555 Badge is an open-source printed circuit board by onismond, from the onismond/555_Badge repository on GitHub. It is a 2-layer board of 53.8 × 85.6 mm with 18 parts on 12 nets, routed with 66 tracks and 0 vias.
It is built around the NE555P, BS-7 and EG1218. Its parts include 6 resistors, 2 capacitors, 2 diodes, 1 IC and 1 transistor. It belongs with the lEDs and displays boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6 |
| 2 | RED | LED_THT:LED_D5.0mm | D1, D2 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 2N3904 | digikey-footprints:TO-92-3 | Q1 |
| 1 | 330k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | BS-7 | digikey-footprints:Battery_Holder_Coin_2032_BS-7 | BAT1 |
| 1 | EG1218 | digikey-footprints:Switch_Slide_11.6x4mm_EG1218 | S1 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |
The 14 most common of 18 parts.

0xlama/ATtiny_LED_Matrix_Display_Badge
An ATtiny85 based badge size PCB that can display alphabets and numbers .

ShawnHymel/555_badge
555 Badge ========= Badge project based on a 555 timer circuit. Users can follow along with the Digi-Key video series to design and fabricate their own badge PCB.

tinkererway/Bow-Tie-PCB-Badge-
A wearable Bow Tie PCB badge for your next Special occasion.

Gregification/cse-labs
computer-engineering undergrad course work, university of texas at arlington




It measures 53.8 × 85.6 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the NE555P, BS-7 and EG1218. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the onismond/555_Badge repository on GitHub, at the commit this page was made from: the board is 555_Badge.kicad_pcb and its schematic 555_Badge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask onismond before reusing the design.