

Oscillator
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 519
- Nets
- 67
- Pads
- 689
- Tracks, vias
- 612, 172
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Feb 2026
- Updated
- 12 Feb 2026
Overview
Oscillator is an open-source printed circuit board by onionicecream, from the onionicecream/sinusoidal_oscillator repository on GitHub. It is a 2-layer board of 100 × 100 mm with 519 parts on 67 nets, routed with 612 tracks and 172 vias.
It is built around the NE5532 and 1N4148W. Its parts include 36 resistors, 28 connectors, 26 capacitors, 6 ICs and 4 diodes.
Main components
2README
README.mdsinusoidal_oscillator
- designed a low distortion (SFDR 85dB) 10kHz sinusoidal oscillator
- scientific report (grade 10/10)
- designed and assembled a SMD PCB version
Parts
519| Qty | Value | Footprint | References |
|---|---|---|---|
| 51 | , , , , , , , , , , , , , , , +35 | ||
| 25 | Conn_01x01_Pin | CUSTOM:custom_pin | J1, J2, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23 +9 |
| 12 | 100nF | Capacitor_SMD:C_1206_3216Metric | C1, C2, C3, C4, C10, C11, C12, C13, C14, C15, C16, C17 |
| 12 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP13, JP14, JP16, JP17, JP18, JP20 |
| 8 | 150 | Resistor_SMD:R_0805_2012Metric | R1, R4, R6, R11, R13, R16, R18, R19 |
| 8 | 2.7k | Resistor_SMD:R_0805_2012Metric | R2, R3, R5, R10, R12, R15, R17, R20 |
| 8 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP7, JP8, JP9, JP10, JP11, JP12, JP15, JP19 |
| 6 | NE5532 | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U1, U2, U3, U4, U5, U6 |
| 4 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D3, D4 |
| 4 | 5.6nF | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C22, C23, C24, C27 |
| 4 | 5.6nF | Capacitor_SMD:C_1206_3216Metric | C5, C6, C7, C8 |
| 4 | TestPoint | Connector_Pin:Pin_D1.0mm_L10.0mm | TP1, TP2, TP3, TP4 |
| 3 | 100k | Resistor_SMD:R_0805_2012Metric | R8, R29, R30 |
| 3 | 10uF | Capacitor_SMD:CP_Elec_4x5.4 | C18, C20, C21 |
| 3 | 1M | Resistor_SMD:R_0805_2012Metric | R31, R32, R35 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric | R9, R33, R34 |
| 2 | 560k | Resistor_SMD:R_0805_2012Metric | R14, R21 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J24, J26 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R25 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3386P_Vertical | RV1 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_4x5.7 | C19 |
| 1 | 2.2k | Resistor_SMD:R_0805_2012Metric | R28 |
| 1 | 220k | Resistor_SMD:R_0805_2012Metric | R22 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric | R26 |
| 1 | 270 | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R24 |
| 1 | 330k | Resistor_SMD:R_0603_1608Metric | R36 |
| 1 | 4.7mH | Inductor_SMD:L_Bourns_SRR1208_12.7x12.7mm | L1 |
| 1 | 56nF | Capacitor_SMD:C_1206_3216Metric | C9 |
| 1 | 56nF | Capacitor_THT:C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C25 |
| 1 | 68k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 820 | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J25 |
| 1 | Fiducial_1mm_Mask3mm | Fiducial:Fiducial_1mm_Mask3mm | F1 |
| 1 | NMOS | Package_TO_SOT_SMD:SOT-23-3 | Q2 |
| 1 | PMOS | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
The 180 most common of 519 parts.
Similar boards
- 2 layers84 × 85 mm

- 4 layers133.9 × 165.1 mm

Main VCO board
JordanAceto/micro_ox
Monosynth with analog signal path and digital controls. SSI2130 VCOs and SSI2140 VCF.
295 parts8CC-BY-4.0 - 2 layers114 × 89 mm

- 2 layers100 × 90 mm

- 2 layers100 × 100 mm

- 4 layers105 × 60 mm

- 2 layers100 × 100 mm

- 2 layers52.5 × 36.6 mm

ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
52 parts453
Questions
How big is the Oscillator PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Oscillator use?
519 parts, built around the NE5532 and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Oscillator KiCad files?
From the onionicecream/sinusoidal_oscillator repository on GitHub, at the commit this page was made from: the board is oscillator/oscillator.kicad_pcb and its schematic oscillator/oscillator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Oscillator design in my own project?
Its repository states no licence, so its author keeps all rights: ask onionicecream before reusing the design.