

LiteWingV2.5C
This repository contains the current KiCad-based LiteWing prototype package: source PCB files, manufacturing outputs, assembly data, 3D reference models, firmware binaries, datasheets, and design-review records.
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 87
- Nets
- 91
- Pads
- 353
- Tracks, vias
- 7,130, 349
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Sep 2026
- Updated
- 14 Sep 2026
Overview
LiteWingV2.5C is an open-source printed circuit board by Omern187, from the Omern187/lite-wing-drone repository on GitHub. It is a 2-layer board of 100 × 100 mm with 87 parts on 91 nets, routed with 7,130 tracks and 349 vias.
It is built around the ESP32-S3-WROOM-1-N8, CH340K and 2N7002DW, with the AO3401A, MPU-6050 and CC0603KRX7R9BB104 among its other parts. Its parts include 30 resistors, 18 capacitors, 13 connectors, 10 diodes and 5 ICs. It belongs with the ESP32 boards of this library.
Main components
12ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesCH340K
ESSOP-10-150mil-1mm-20℃~+70℃ 2Mbps 3.3V、5V USB 2.0 USB to serial ESSOP-10-150mil-1mm USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters2N7002DW
SOT-363-50℃~+150℃ 1.9Ω@10V 12pF 2 N-Channel 2.5V 300mA 300mW 60V 650pC@30V SOT-363 MOSFETs ROHSGuangdong HottechMOSFETsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsMPU-6050
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA Accelerometer Gyroscope I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometersCC0603KRX7R9BB104
0603100nF 50V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT0603B103K500NT
060310nF 50V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSGuangdong Fenghua Advanced Tech (FH)Multilayer Ceramic Capacitors MLCC - SMD/SMT1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes0603B222K500NT
06032.2nF 50V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSGuangdong Fenghua Advanced Tech (FH)Multilayer Ceramic Capacitors MLCC - SMD/SMTTCC0805X7R225M250FT
08052.2uF 25V X7R ±20% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSCCTCMultilayer Ceramic Capacitors MLCC - SMD/SMT0603B471K500NT
0603470pF 50V X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSGuangdong Fenghua Advanced Tech (FH)Multilayer Ceramic Capacitors MLCC - SMD/SMT1.25-2A
插件,P=1.25mm-25℃~+85℃ 1 1.25mm 125V 1A 1x2P 2 2P 3.25mm 4.5mm 4.6mm Beige PicoBlade(MX 1.25) Through Hole 插件,P=1.25mm Wire To Board Connector ROHSFGWire To Board Connector
README
README.mdLiteWing drone — prototype hardware package
This repository contains the current KiCad-based LiteWing prototype package: source PCB files, manufacturing outputs, assembly data, 3D reference models, firmware binaries, datasheets, and design-review records.
Status
This is a prototype candidate, not a proven flight-ready design. Digital checks in review/ report zero native KiCad DRC/ERC issues for the reviewed revision, but no physical board has been assembled, powered, programmed, or flown. Complete the first-article checks in BENCH-TEST-PLAN.md before ordering more boards.
The design targets four 720 coreless DC motors, 55 mm or 65 mm propellers, and a 1S Li-Po battery (3.7 V nominal, 4.2 V maximum). Motors, propellers, the Li-Po, and motor wiring are external build items.
Repository layout
| Path | Contents |
|---|---|
pcb/ | KiCad project, local libraries, footprints, and 3D models. Open pcb/LiteWingV2.5C.kicad_pro in KiCad 9. |
manufacturing/gerbers/ | Gerber and drill outputs for the reviewed main-board revision. |
manufacturing/assembly/ | JLCPCB-compatible BOM and placement files. |
bom/ | Per-drone parts list, hand-install list, and assembly/footprint map. |
mechanical/ | PCB assembly STEP reference and printable motor-grommet samples. |
firmware/ | Upstream firmware binaries; they have not been rebuilt or validated against a physical board here. |
review/ | DRC/ERC reports, release review, independent review, and manufacturing checks. |
datasheets/ | Datasheets gathered during review. |
JLCPCB assembly files
Use a BOM and CPL from the same folder together. The board is a two-layer design with top-side SMD placements.
manufacturing/assembly/BOM-CANDIDATE.csvandmanufacturing/assembly/CPL-CANDIDATE.csvare the reviewed default assembly inputs.manufacturing/assembly/economic-t1-basic/BOM-JLC-economic-T1-AO3400A.csvandCPL-JLC-economic-T1-AO3400A.csvare the latest economical variant. They change only motor MOSFETsT1–T4from IRLML6344 to JLCPCB Basic partC20917(AO3400A). All remaining placements are unchanged.
JLCPCB Economic Assembly cannot fit through-hole parts. Install the battery connector J2 and motor wires after delivery. Verify the connector polarity with a multimeter before connecting a Li-Po: J2 pin 1 is +BATT; pin 2 is GND.
Important build holds
Before checkout or first power-up, review START-HERE.md and review/RELEASE-REVIEW.md. The remaining checks include battery/charger compatibility, exact motor current versus MOSFET and flyback-diode ratings, connector fit, MPU-6050 sourcing, assembly rotation, and physical bring-up.
The MPU-6050 is a QFN package. If it is purchased separately, it requires solder paste and hot-air or reflow assembly; a soldering iron alone is unsuitable.
License
The upstream license is retained in LICENSE-upstream.txt. Read it before redistribution or commercial use.
Parts
87| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0R | LiteWingRepair:LiteWing_R30 | R30 |
| 1 | 0R | LiteWingRepair:LiteWing_R28 | R28 |
| 1 | 0R | LiteWingRepair:LiteWing_R29 | R29 |
| 1 | 1.2K | LiteWingRepair:LiteWing_R5 | R5 |
| 1 | 100K | LiteWingRepair:LiteWing_R26 | R26 |
| 1 | 100K | LiteWingRepair:LiteWing_R27 | R27 |
| 1 | 100K | LiteWingRepair:LiteWing_R3 | R3 |
| 1 | 100K | LiteWingRepair:LiteWing_R8 | R8 |
| 1 | 100nF | LiteWingRepair:LiteWing_C8 | C8 |
| 1 | 100nF | LiteWingRepair:LiteWing_C6 | C6 |
| 1 | 100nF | LiteWingRepair:LiteWing_C13 | C13 |
| 1 | 100nF | LiteWingRepair:LiteWing_C14 | C14 |
| 1 | 100nF | LiteWingRepair:LiteWing_C10 | C10 |
| 1 | 100nF | LiteWingRepair:LiteWing_C7 | C7 |
| 1 | 10k | LiteWingRepair:LiteWing_R25 | R25 |
| 1 | 10k | LiteWingRepair:LiteWing_R20 | R20 |
| 1 | 10k | LiteWingRepair:LiteWing_R14 | R14 |
| 1 | 10k | LiteWingRepair:LiteWing_R17 | R17 |
| 1 | 10k | LiteWingRepair:LiteWing_R18 | R18 |
| 1 | 10k | LiteWingRepair:LiteWing_R16 | R16 |
| 1 | 10k | LiteWingRepair:LiteWing_R21 | R21 |
| 1 | 10k | LiteWingRepair:LiteWing_R23 | R23 |
| 1 | 10k | LiteWingRepair:LiteWing_R22 | R22 |
| 1 | 10k | LiteWingRepair:LiteWing_R19 | R19 |
| 1 | 10k | LiteWingRepair:LiteWing_R24 | R24 |
| 1 | 10nf | LiteWingRepair:LiteWing_C11 | C11 |
| 1 | 10uF | LiteWingRepair:LiteWing_C5 | C5 |
| 1 | 10uF | LiteWingRepair:LiteWing_C12 | C12 |
| 1 | 10uF | LiteWingRepair:LiteWing_C4 | C4 |
| 1 | 10uF | LiteWingRepair:LiteWing_C1 | C1 |
| 1 | 1K | LiteWingRepair:LiteWing_R7 | R7 |
| 1 | 1K | LiteWingRepair:LiteWing_R13 | R13 |
| 1 | 1K | LiteWingRepair:LiteWing_R11 | R11 |
| 1 | 1K | LiteWingRepair:LiteWing_R6 | R6 |
| 1 | 1K | LiteWingRepair:LiteWing_R9 | R9 |
| 1 | 1K | LiteWingRepair:LiteWing_R10 | R10 |
| 1 | 1K | LiteWingRepair:LiteWing_R12 | R12 |
| 1 | 1N4148W | LiteWingRepair:LiteWing_D5 | D5 |
| 1 | 1N4148W | LiteWingRepair:LiteWing_D3 | D3 |
| 1 | 1N4148W | LiteWingRepair:LiteWing_D4 | D4 |
| 1 | 1N4148W | LiteWingRepair:LiteWing_D2 | D2 |
| 1 | 1uF | LiteWingRepair:LiteWing_C15 | C15 |
| 1 | 1uF | LiteWingRepair:LiteWing_C16 | C16 |
| 1 | 1uF | LiteWingRepair:LiteWing_C17 | C17 |
| 1 | 1uF | LiteWingRepair:LiteWing_C18 | C18 |
| 1 | 2.2nf | LiteWingRepair:LiteWing_C9 | C9 |
| 1 | 2.2uF | LiteWingRepair:LiteWing_C3 | C3 |
| 1 | 2N27002DW | LiteWingRepair:LiteWing_U6 | U6 |
| 1 | 4.7k | LiteWingRepair:LiteWing_R15 | R15 |
| 1 | 470R | LiteWingRepair:LiteWing_R4 | R4 |
| 1 | 470pF | LiteWingRepair:LiteWing_C2 | C2 |
| 1 | 5.1K | LiteWingRepair:LiteWing_R1 | R1 |
| 1 | 5.1K | LiteWingRepair:LiteWing_R2 | R2 |
| 1 | AO3401A | LiteWingRepair:LiteWing_U1 | U1 |
| 1 | CH340K | LiteWingRepair:LiteWing_U5 | U5 |
| 1 | Conn_01x02 | LiteWingRepair:LiteWing_J14 | J14 |
| 1 | Conn_01x02_Female | LiteWingRepair:LiteWing_J10 | J10 |
| 1 | Conn_01x02_Female | LiteWingRepair:LiteWing_J7 | J7 |
| 1 | Conn_01x02_Female | LiteWingRepair:LiteWing_J8 | J8 |
| 1 | Conn_01x02_Female | LiteWingRepair:LiteWing_J9 | J9 |
| 1 | Conn_01x06 | LiteWingRepair:LiteWing_J6 | J6 |
| 1 | Conn_01x06 | LiteWingRepair:LiteWing_J5 | J5 |
| 1 | Conn_01x06 | LiteWingRepair:LiteWing_J12 | J12 |
| 1 | Conn_01x06 | LiteWingRepair:LiteWing_J3 | J3 |
| 1 | Conn_01x06 | LiteWingRepair:LiteWing_J4 | J4 |
| 1 | Conn_01x07 | LiteWingRepair:LiteWing_J13 | J13 |
| 1 | Conn_01x09 | LiteWingRepair:LiteWing_J11 | J11 |
| 1 | ESP32-S3-WROOM-1 | LiteWingRepair:LiteWing_U8 | U8 |
| 1 | IRLML6344TRPBF | LiteWingRepair:LiteWing_T2 | T2 |
| 1 | IRLML6344TRPBF | LiteWingRepair:LiteWing_T3 | T3 |
| 1 | IRLML6344TRPBF | LiteWingRepair:LiteWing_T1 | T1 |
| 1 | IRLML6344TRPBF | LiteWingRepair:LiteWing_T4 | T4 |
| 1 | JST XH 2P 2.50mm SMD Hoz | LiteWingRepair:LiteWing_J2 | J2 |
| 1 | LED_Blue | LiteWingRepair:LiteWing_LED3 | LED3 |
| 1 | LED_Blue | LiteWingRepair:LiteWing_LED6 | LED6 |
| 1 | LED_Green | LiteWingRepair:LiteWing_LED4 | LED4 |
| 1 | LED_Red | LiteWingRepair:LiteWing_LED5 | LED5 |
| 1 | LED_Red | LiteWingRepair:LiteWing_LED2 | LED2 |
| 1 | LED_Red | LiteWingRepair:LiteWing_LED1 | LED1 |
| 1 | MPU-6050 | LiteWingRepair:LiteWing_U7 | U7 |
The 80 most common of 87 parts.
Similar boards
- 4 layers100 × 68 mm

- 6 layers240 × 207 mm

- 4 layers100 × 60 mm

GigaDFN56
kaminaris/GigaESC-DFN5x6
Compact, modular three-phase ESC power board for the GigaESC project. Designed in KiCad 10 on a 100 × 60 mm, four-layer PCB, with separate plug-in control and power-supply boards.
234 parts - 2 layers100 × 92 mm

Base station
yeyintlwin/kicad-board-design
Design a two-layer KiCad PCB entirely from Python scripts - no GUI step, no commercial autorouter
69 partsMIT - 2 layers90.2 × 91.3 mm

Pb v1
ossm-rs/ossm-rs-powerboard
Power management PCB for AIM family motors, designed to pair with the Industrial ESP32-S3-RS485-CAN control board by Waveshare and run with OSSM-RS software.
58 parts2 - 4 layers52.9 × 79.6 mm

PCB Pere V1
CaptainDJMax/2627_Projet3AMSC_Index_Stellaire
Ceci est notre projet sur l'index stellaire
93 partsMIT - 4 layers82.1 × 80.2 mm

Seguidor de linhas 4camada2-2026-1
wvianna/mcp-kicad-vscode
Workspace que combina um servidor MCP para automação de design de PCB com KiCad e o projeto de hardware (placa de circuito impresso) desenvolvido com ele.
97 parts - 4 layers65.5 × 39 mm

Questions
How big is the LiteWingV2.5C PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LiteWingV2.5C use?
87 parts, built around the ESP32-S3-WROOM-1-N8, CH340K, 2N7002DW and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LiteWingV2.5C KiCad files?
From the Omern187/lite-wing-drone repository on GitHub, at the commit this page was made from: the board is pcb/LiteWingV2.5C.kicad_pcb and its schematic pcb/LiteWingV2.5C.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LiteWingV2.5C design in my own project?
Its repository states no licence, so its author keeps all rights: ask Omern187 before reusing the design.