
4in1-panel
OpenDrone-hw/OpenESC-30x30
Open-source 4-in-1 AM32 ESC for FPV drones. 30.5x30.5 mm, 2-8S, one MCU per motor, CERN-OHL-S-2.0.

Open-source 4-in-1 BLDC ESC with a 30.5 × 30.5 mm mounting pattern, built around four independent AT32F421 motor controllers running AM32. Six-layer, DShot over the standard 8-pin connector.
4in1 is an open-source printed circuit board by OliviezGit, from the OliviezGit/OpenESC-30x30 repository on GitHub. It is a 6-layer board of 41.6 × 42.5 mm with 218 parts on 192 nets, routed with 1,328 tracks and 1,522 vias.
It is built around the AT32F421G8U7, NSG2065Q and LMR54406DBVR-MS, with the FTC160808S4R7MBCA, TLV76733DRVR and SP40N01GHNK among its other parts. Its parts include 88 capacitors, 79 resistors, 24 transistors, 13 ICs and 3 diodes. It belongs with the robots and motor control boards of this library.
Open-source 4-in-1 BLDC ESC with a 30.5 × 30.5 mm mounting pattern, built around four independent AT32F421 motor controllers running AM32. Six-layer, DShot over the standard 8-pin connector. Designed in KiCad for JLCPCB assembly.
Part of the incutec OpenDrone line (incutec-hw/OpenESC-30x30).
A smaller OpenESC_20X20 (20×20 mm) shares this design and mirrors this repo. The two differ only in board/mounting size and a few power-stage parts.
Four fully independent ESC channels share a common power input and telemetry connector. Each channel has its own MCU and gate driver; the high-current stage is six MOSFETs per channel (three half-bridges). This is the distributed-MCU AM32 4-in-1 topology rather than a single-MCU design. Values below are extracted from the KiCad design files (hardware/4in1.kicad_sch, hardware/ESC.kicad_sch, hardware/4in1.kicad_pcb) and the production BOM (hardware/production/Rev1-30x30_bom.csv).
| Block | Part | LCSC | Per board |
|---|---|---|---|
| Motor MCU | AT32F421G8U7 (QFN-28) | C2765098 | 4 |
| Gate driver | NSG2065Q (QFN-24) | C41414478 | 4 |
| Power MOSFETs | SP40N01GHNK PDFN-8L (5×6) | C22385416 | 24 (6 per channel) |
| Parameter | Value |
|---|---|
| Channels | 4 independent BLDC channels |
| MCU | AT32F421G8U7 (ARM Cortex-M4, QFN-28), one per channel |
| Gate driver | NSG2065Q (QFN-24, FD6288Q-compatible), one per channel |
| Power MOSFETs | SP40N01GHNK, N-channel, PDFN-8L (5×6), 24 total (XRS280N03C selected as drop-in next-gen — not yet swapped) |
| Current sense | Board-level high-side: INA186A3IDCKR (100 V/V, SC-70-6) across 2× 0.2 mΩ 2512 shunts in parallel (0.1 mΩ) in the +BATT feed → 10 mV/A → ~330 A full-scale at 3.3 V ADC |
| Input | +BATT direct from connector/pads, 3S–6S |
| Input protection | 3× SMBJ24A TVS (24 V standoff) |
| Buck regulator | LMR54406DBVR (SOT-23-6) + FTC160808S4R7MBCA 4.7 µH inductor → +10 V gate-drive rail (FB 115k/10k, Vref 0.8 V → 10.0 V) |
| LDO | TLV76733DRVR (WSON-6) → +3V3 (MCUs, sensing), from +10 V |
| Signal protocol | DShot (4 independent signal lines, one per channel) |
| Firmware | AM32 (per-channel AT32F421 target, flashed individually) |
| PCB | 6-layer, 1.69 mm |
| Mounting pattern | 30.5 × 30.5 mm, 4× Ø4.0 mm holes (M3) |
Current/voltage ratings are not printed on the design files. The input clamp is set by the SMBJ24A TVS (24 V standoff → 3S–6S); the MOSFET (SP40N01GHNK) and current-sense full-scale (~330 A) set the practical envelope. Characterize before quoting a hard rating.
8-pin JST SM08B-SRSS-TB (J1). Pin-to-net mapping extracted from the schematic (net labels at the connector pins):
| Pin | Net | Function |
|---|---|---|
| 1 | +BATT | Battery positive |
| 2 | GND | Ground |
| 3 | /CURR | Current-sense telemetry (INA186 output) |
| 4 | (unconnected) | No dedicated telemetry pin — telemetry handled by extended DShot |
| 5 | /M1 | DShot signal, channel 1 |
| 6 | /M2 | DShot signal, channel 2 |
| 7 | /M3 | DShot signal, channel 3 |
| 8 | /M4 | DShot signal, channel 4 |
Connector ground returns on the shield/mounting pads P1/P2 (both GND). The same eight signals are also broken out as direct solder pads (U3). Pin 4 — the dedicated telemetry pin on the Betaflight 8-pin standard — is intentionally unconnected: ESC→FC telemetry is carried over the motor signal lines via the bidirectional extended DShot protocol.
| File | Description |
|---|---|
hardware/4in1.kicad_pro / .kicad_pcb / .kicad_sch | Main design (30×30). |
hardware/4in1-panel.kicad_pro / .kicad_pcb | Panelized version for production fabrication. |
This repo is the 30×30 member of the OpenESC family; the 20×20 sibling lives in OpenESC_20X20. Production exports in hardware/production/ are versioned V0.1–V0.4 and Rev1. Rev1-30x30 is the 30×30-only fabrication set; Rev1-30x3020x20 is a combined shared-fab set produced alongside the mini.
AM32 — incutec's default ESC firmware. Boards ship with the AM32 bootloader pre-loaded; firmware is flashed and configured in-browser at am32.ca. Each channel's AT32F421G8U7 is an independent AM32 target. The AT32F421 + NSG2065Q per-channel topology and the DShot signal nets are the standard AM32 4-in-1 hardware target. Works with Betaflight and other DShot-capable flight controllers.
README.md LICENSE CLAUDE.md Repo root: docs + license + agent instructions
images/ Board render images
licensing/ Hardware license, third-party notices, trademark policy
hardware/ KiCad 9 project (everything to build/fab the board)
├── 4in1.kicad_sch Top schematic (power, current sense, connector)
├── ESC.kicad_sch Single ESC channel sheet (instantiated 4×)
├── 4in1.kicad_pcb Main board layout (6-layer)
├── 4in1.kicad_pro Main project
├── 4in1-panel.kicad_pcb / .kicad_pro Panelized layout/project for production
├── components.kicad_sym Project-local symbol library
├── 4in1ESC-30x30.pretty/ Project-local footprints
├── 4in1ESC-30x30.3dshapes/ 3D models (STEP)
├── fp-lib-table / sym-lib-table Project-local library tables (${KIPRJMOD})
├── 4in1.step / 4in1.glb Exported board 3D models
├── production/ JLCPCB fabrication exports (gerbers, BOM, CPL) per revision
├── fabrication-toolkit-options.json KiCad Fabrication Toolkit settings
├── cost-analysis.md JLCPCB 500-unit cost breakdown (predates latest BOM)
└── database/ Component analysis notesHardware: CERN-OHL-S-2.0. See LICENSE, licensing/THIRD_PARTY.md, and licensing/TRADEMARKS.md. Some bundled 3D model assets carry their own upstream notices (CC-BY-SA-4.0 / GPL).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 50 | 10uF | Capacitor_SMD:C_1206_3216Metric | C2, C13, C14, C15, C16, C17, C18, C19, C20, C24, C100, C101, C105, C106, C107, C108 +34 |
| 24 | 10k | Capacitor_SMD:C_0201_0603Metric | R10, R12, R13, R15, R25, R27, R28, R30, R31, R33, R34, R36, R46, R48, R49, R51 +8 |
| 24 | 15R | Resistor_SMD:R_0201_0603Metric | R23, R24, R37, R38, R42, R43, R44, R45, R55, R56, R60, R61, R62, R63, R74, R75 +8 |
| 24 | C22385416 | 4in1ESC-30x30:PDFN-8L_L6.0-W5.0-P1.27 | Q1, Q2, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23 +8 |
| 22 | 100nF | Capacitor_SMD:C_0201_0603Metric | C48, C49, C50, C52, C54, C55, C57, C58, C59, C60, C61, C63, C64, C65, C66, C68 +6 |
| 13 | 1k | Capacitor_SMD:C_0201_0603Metric | R11, R14, R26, R29, R32, R35, R47, R50, R53, R65, R68, R71, R73 |
| 12 | 100nF | Capacitor_SMD:C_0402_WIDE | C32, C33, C34, C35, C36, C37, C38, C39, C53, C56, C62, C67 |
| 8 | 10k | Resistor_SMD:R_0201_0603Metric | R18, R19, R21, R22, R40, R41, R58, R59 |
| 8 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 4 | 10R | Resistor_SMD:R_0201_0603Metric | R84, R85, R86, R88 |
| 4 | 220R | Resistor_SMD:R_0201_0603Metric | R20, R39, R57, R87 |
| 4 | AT32F421G8U7 | 4in1ESC:QFN-28_L4.0-W4.0-P0.40-TL-EP2.4 | U2, U5, U7, U9 |
| 4 | NSG2065Q | 4in1ESC:QFN-24_L4.0-W4.0-P0.50-TL-EP2.8 | U4, U6, U8, U10 |
| 3 | SMBJ24A | 4in1ESC-30x30:SMB_L4.5-W3.7-LS5.4-RD | D1, D2, D3 |
| 2 | 0.2mR | Resistor_SMD:R_2512_6332Metric | Rsense1, Rsense2 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric | C47, C86 |
| 2 | 22uF | Capacitor_SMD:C_0402_1005Metric | C4, C51 |
| 1 | 10k | 4in1ESC:R_0201_0603Metric | R121 |
| 1 | 115k | Resistor_SMD:R_0201_0603Metric | R120 |
| 1 | FTC160808S4R7MBCA | 4in1ESC:IND-SMD_L1.6-W0.8_FTC160865SR47MBCA | U14 |
| 1 | INA186A3IDCKR | 4in1ESC-30x30:SOT-363_SC-70-6 | U12 |
| 1 | LMR54406DBVR | 4in1ESC:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | U13 |
| 1 | SM08B-SRSS-TB | 4in1ESC-30x30:JST_SM08B-SRSS-TB | J1 |
| 1 | TLV76733DRVR | 4in1ESC:WSON-6_L2.0-W2.0-P0.65-TL-EP | U15 |
| 1 | ~ | 4in1ESC-30x30:4in1ESC30x30 | U3 |

OpenDrone-hw/OpenESC-30x30
Open-source 4-in-1 AM32 ESC for FPV drones. 30.5x30.5 mm, 2-8S, one MCU per motor, CERN-OHL-S-2.0.

OpenDrone-hw/OpenESC-20x20
Open-source 4-in-1 AM32 ESC for FPV drones. 20x20 mm, 2-6S, one MCU per motor, CERN-OHL-S-2.0.

Caped-Crussader/VENDETTAFC
A fully open-source, custom-designed 4-in-1 ESC and F7 Flight Controller stack for FPV multirotors, designed from scratch in KiCad.

OpenDrone-hw/OpenAIO
Open-source AIO for 2-6S toothpick quads: flight controller, 4-in-1 AM32 ESC and ExpressLRS receiver, 25.5x25.5 mm.

cookiemonsternz/drone
F \ish PV is a open source, custom stack, 75mm tinywhoop drone design. It utilises AM32 for the ESC firmware and Betaflight for the flight controller.

tetraethylmethane/NIDAR-RescueSwarm
Three autonomous drones that search a flood zone, find survivors, geotag them, and drop medical kits — with no network, no pilot, and one operator who only presses start.


holoindustry/AxxSolder_modded
Interested in purchasing an AxxSolder 3.2? On my website 5Dimensions you can purchase assembled and tested AxxSolder 3.2 boards with connectors and hardware.
It measures 41.6 × 42.5 mm and has 6 copper layers, 1.69 mm thick.
218 parts, built around the AT32F421G8U7, NSG2065Q, LMR54406DBVR-MS and FTC160808S4R7MBCA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OliviezGit/OpenESC-30x30 repository on GitHub, at the commit this page was made from: the board is hardware/4in1.kicad_pcb and its schematic hardware/4in1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask OliviezGit before reusing the design.