Skip to the content
2 layers80 × 71.1 mmBasic Clock, the printed circuit board in 3D

Documentation for the Split-Flap-Display project with the apprentice

Size
80 × 71.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
22
Pads
102
Tracks, vias
90, 2
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
2 Feb 2020
Updated
26 Feb 2024

Overview

Basic Clock is an open-source printed circuit board by oli4wolf, from the oli4wolf/Split-Flap-Display repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 80 × 71.1 mm with 30 parts on 22 nets, routed with 90 tracks and 2 vias.

It is built around the ATMEGA328P-PU, MAX485ED and R-78E5.0-0.5. Its parts include 6 resistors, 4 capacitors, 4 connectors, 3 ICs and 3 switches. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

3

README

PCBs/Basic_Clock_v1.1/readme.md

Version 1.1 Changes

  • DIP for the RS485 Maxime microcontroller
  • U-Numbers added
  • Moved one wire 28v away from pin
  • Changed Namings from GND to 0V

Parts

30
QtyValueFootprintReferences
410kResistor:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR4, R5, R6, R7
4MountingHoleMountingHole:MountingHole_3.2mm_M3_ISO14580H1, H2, H3, H4
3Conn_01x02_FemaleConnector THT:PinSocket_1x02_P2.54mm_VerticalJ_I2C1, J_I2C2, J_POWER1
3SW_PushButton THT:SW_PUSH_6mm_H5mmSW2, SW3, SW4
2100nFCapacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mmC6, C7
222pfCapacitor THT:C_Rect_L7.0mm_W3.5mm_P5.00mmC1, C2
2Screw_Terminal_01x02TerminalBlock_RND:TerminalBlock_RND_205-00232_1x02_P5.08mm_HorizontalJ3, J4
1120Resistor:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR8
116MhzQuartz:Crystal_HC49-4H_VerticalY1
11KResistor:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR3
1ATmega328P-PUPackage_DIP:DIP-28_W7.62mm_SocketU2
1Conn_01x03_FemaleConnector THT:PinSocket_1x03_P2.54mm_VerticalJ5
1Conn_01x04_FemaleConnector THT:PinSocket_1x04_P2.54mm_VerticalJ1
1Conn_02x03_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_VerticalICSP1
1MAX485EMAX485:DIP794W47P254L991H457Q8U3
1Power LEDLED:LED_D5.0mm_ClearD1
1R-78E5.0-0.5Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THTU4

More from oli4wolf/Split-Flap-Display

4
  • 2 layers97.8 × 71.1 mmBasic Clock, the printed circuit board in 3D

    Basic Clock

    oli4wolf/Split-Flap-Display

    Documentation for the Split-Flap-Display project with the apprentice

    38 partsGPL-3.0
  • 2 layers97.8 × 71.1 mmBasic Clock, the printed circuit board in 3D

    Basic Clock

    oli4wolf/Split-Flap-Display

    Documentation for the Split-Flap-Display project with the apprentice

    37 partsGPL-3.0
  • 2 layers97.8 × 71.1 mmBasic Clock, the printed circuit board in 3D

    Basic Clock

    oli4wolf/Split-Flap-Display

    Documentation for the Split-Flap-Display project with the apprentice

    33 partsGPL-3.0
  • 2 layers72.6 × 71.1 mmBasic Clock, the printed circuit board in 3D

    Basic Clock

    oli4wolf/Split-Flap-Display

    Documentation for the Split-Flap-Display project with the apprentice

    31 partsGPL-3.0

Similar boards

  • 2 layers100 × 80 mmTorqeedo pcb, the printed circuit board in 3D

    Torqeedo pcb

    antoinem01/torqeedo_motor

    Arduino sketch to control a Torqeedo electric outboard motor over RS485, with speed control and safety switches

    43 partsGPL-3.0
  • 2 layers80 × 50 mmIoT Enabled Smart RS-485-Modbus Sensor Node, the printed circuit board in 3D

    IoT Enabled Smart RS-485-Modbus Sensor Node

    sitlesh/IoT-Enabled-Smart-RS-485-Modbus-Sensor-Node

    Industrial-grade Modbus RTU communication node featuring full galvanic isolation between the ATmega328P logic block and the RS485 network. Designed in KiCad with an optimized on-board LM2596 switching buck regulator.

    24 parts
  • 2 layers148 × 84.5 mmPanel daisy, the printed circuit board in 3D

    Panel daisy

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    259 parts410
  • 2 layers63 × 58 mmOPNpool r5, the printed circuit board in 3D

    OPNpool r5

    cvonk/OPNpool

    Integrates the functionality of a Pentair pool controller into the smart home using ESP32 SoC.

    17 parts102
  • 2 layers68.6 × 53.3 mmProtogasm Board V2, the printed circuit board in 3D

    Protogasm Board V2

    Edging-Machines/Edging-Machines

    This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.

    14 parts67MIT
  • 4 layers231 × 67 mmBESC G2, the printed circuit board in 3D

    BESC G2

    galpavlin/BESC-G2

    BESC second generation

    300 parts58
  • 2 layers127 × 114.3 mmNes, the printed circuit board in 3D

    Nes

    dkonigsberg/nestronic

    Nestronic Game Music Synthesizer Alarm Clock

    144 parts38
  • 4 layers58.4 × 101.9 mmUp5k osc, the printed circuit board in 3D

    Up5k osc

    emeb/up5k_osc

    The brute-force approach is to synthesize these analog waveforms at sufficiently high sample rates that the timing jitter becomes imperceptible.

    137 parts36MIT

Questions

How big is the Basic Clock PCB?

It measures 80 × 71.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Basic Clock use?

30 parts, built around the ATMEGA328P-PU, MAX485ED and R-78E5.0-0.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Basic Clock KiCad files?

From the oli4wolf/Split-Flap-Display repository on GitHub, at the commit this page was made from: the board is PCBs/Basic_Clock_v0.6/Basic_Clock.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Basic Clock design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).