2 layers181 × 97 mm
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0
2 layers337.5 × 123.1 mm
Alice PCB
ojthetiny/OpenErgo33Open Source Alice Keyboard
- Size
- 337.5 × 123.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 172
- Nets
- 121
- Pads
- 666
- Tracks, vias
- 846, 55
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Mar 2022
- Updated
- 14 Mar 2022
Overview
Alice PCB is an open-source printed circuit board by ojthetiny, from the ojthetiny/OpenErgo repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 337.5 × 123.1 mm with 172 parts on 121 nets, routed with 846 tracks and 55 vias.
It is built around the PRTR5V0U2X and RB060MM-60TR-TP. It belongs with the STM32 boards of this library.
Main components
2
PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
RB060MM-60TR-TP
SOD-123FL-55℃~+150℃ 100uA@60V 50A 60V 650mV@2A SOD-123FL Schottky Diodes ROHSTECH PUBLICSchottky Diodes
README
README.mdOpenErgo
Open Source Alice Keyboard
Use as a base for your own designs, renders or order as is (read important info at the bottom).
Details:
- Alice layout
- Supports OG Alice plate
- Chonky external weight
- 7.5 degree typing angle.
- Flush USB-C connector built into the PCB
- Skuf feet.
- 3 Piece construction for no external screws (aside from weight)
Important Info (READ BEFORE ORDERING):
- I do not offer any sort of warranty for this, nor can I be held liable if something goes wrong.
- Renders are not fully representative of the final product
- Please, PLEASE look over the design before you do anything with it, it's possible and very likely that there are some errors, I'm just a human.
- Theoretically universal Alice pcb support (bottom side USB), though the connector is possibly slightly misaligned, still untested
Parts
172| Qty | Value | Footprint | References |
|---|---|---|---|
| 66 | D_Small | Diode_SMD:D_SOD-123 | D_SW_0, D_SW_1, D_SW_2, D_SW_3, D_SW_4, D_SW_5, D_SW_6, D_SW_7, D_SW_8, D_SW_9, D_SW_A1, D_SW_B1, D_SW_B2, D_SW_Back1, D_SW_C1, D_SW_Caps1 +50 |
| 54 | MX-NoLED | MX_Only:MX_1u_NoLED | MX_1, MX_2, MX_3, MX_4, MX_5, MX_6, MX_7, MX_8, MX_9, MX_A1, MX_B1, MX_B2, MX_Back2, MX_C1, MX_Comm1, MX-0 +38 |
| 6 | MX-NoLED | MX_Only:MX_1.5u_NoLED | MX_LAlt1, MX_LCtl1, MX_Pipe1, MX_RAlt1, MX_RCtl1, MX_Tab1 |
| 3 | 100n | Capacitor_SMD:C_0402_1005Metric | C_VDD1, C_VDD2, C_VDDIO2 |
| 3 | 1u | Capacitor_SMD:C_0402_1005Metric | C_LDO1, C_LDO2, C_VDDA2 |
| 3 | LED_Small | Components:LED_3mm | D_LED_Caps1, D_LED_Layer1, D_LED_Scroll1 |
| 3 | R_Small | Resistor_SMD:R_0402_1005Metric | R_LED1, R_LED2, R_LED3 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R_LDO1, R_LDO2 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R_BOOT1, R_RGB1 |
| 2 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C_VDD3, C_VDDIO1 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R_USB1, R_USB2 |
| 2 | MX-NoLED | MX_Only:MX_1.25u_NoLED | MX_Caps2, MX_LFn2 |
| 2 | MX-NoLED | MX_Only:MX_2.25u_ReversedStabilizers_NoLED | MX_Enter1, MX_LSpc1 |
| 2 | MX-NoLED | MX_Only:MX_1.75u_NoLED | MX_Caps1, MX_RSft2 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric | C_VDDA1 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R_Shield1 |
| 1 | 4.7n | Capacitor_SMD:C_0402_1005Metric | C_Shield1 |
| 1 | 500mA | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | HRO-TYPE-C-31-M-12 | Components:HRO-TYPE-C-31-M-12-Assembly | USB1 |
| 1 | LOGO | Components:OJ LOGO | G*** |
| 1 | MCP1700-3302E_SOT23 | Package_TO_SOT_SMD:SOT-23 | U_Power1 |
| 1 | MX-NoLED | MX_Only:MX_2.75u_NoLED | MX_RSft1 |
| 1 | MX-NoLED | MX_Only:MX_2u_NoLED | MX_Back1 |
| 1 | MX-NoLED | MX_Only:MX_2.75u_ReversedStabilizers_NoLED | MX_RSpc1 |
| 1 | MX-NoLED | MX_Only:MX_2.25u_NoLED | MX_LSft1 |
| 1 | MX-NoLED | MX_Only:MX_2u_ReversedStabilizers_NoLED | MX_LSpc2 |
| 1 | PRTR5V0U2X | random-keyboard-parts:SOT143B | D_ESD1 |
| 1 | RB060MM_60TR | Diode_SMD:D_SOD-123 | D_LDO1 |
| 1 | RGB | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J_RGB1 |
| 1 | SM9.0CA | Diode_SMD:D_SOD-123 | D_PWR1 |
| 1 | STM32F072C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U_MCU1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J_SWD1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | RESET1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | BOOT1 |
Questions
How big is the Alice PCB PCB?
It measures 337.5 × 123.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Alice PCB use?
172 parts, built around the PRTR5V0U2X and RB060MM-60TR-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Alice PCB KiCad files?
From the ojthetiny/OpenErgo repository on GitHub, at the commit this page was made from: the board is PCB/kicad/Alice_PCB.kicad_pcb and its schematic PCB/kicad/Alice_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Alice PCB design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers68.6 × 53.3 mm
- 4 layers59 × 33.8 mm
- 4 layers137 × 86 mm
- 4 layers230.7 × 97.8 mm
- 2 layers285 × 94.6 mm
- 4 layers40 × 60 mm
Control board v2.0
0x23/nmWave-Interferometer
An Open Source Interferometer for Accurate Distance Measurements
106 parts151MIT - 2 layers285 × 94.6 mm
PH60Slim Choc
ph-design/PH60-SC
A printable low-profile 60% wireless mechanical keyboard kit powered by ZMK firmware.
219 parts132