2 layers58.8 × 63.8 mm
2 layers60 × 39.3 mm
Eth uart breakout
OJ2016/pcb-common1- Size
- 60 × 39.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 22
- Pads
- 48
- Tracks, vias
- 84, 46
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 Aug 2021
- Updated
- 5 Sep 2024
Overview
Eth uart breakout is an open-source printed circuit board by OJ2016, from the OJ2016/pcb-common repository on GitHub. It is a 2-layer board of 60 × 39.3 mm with 14 parts on 22 nets, routed with 84 tracks and 46 vias.
Its parts include 5 connectors and 1 IC. It belongs with the interfaces and adapters boards of this library.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x04_Pin | Connector_JST2:JST_ZH_B4B-ZR_1x04_P1.50mm_Vertical | J1, J2 |
| 1 | 5V IN | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | CH1 PWR | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | CH2 PWR | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | RX-RX1 | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP2 |
| 1 | RX-RX2 | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP4 |
| 1 | RX-TX1 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP5 |
| 1 | RX-TX2 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP8 |
| 1 | TX-RX1 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP6 |
| 1 | TX-RX2 | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP7 |
| 1 | TX-TX1 | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | TX-TX2 | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP3 |
| 1 | ~ | voja-footprints:WAVESHARE-2CH-UART-TO-ETH | U1 |
Questions
How big is the Eth uart breakout PCB?
It measures 60 × 39.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Eth uart breakout use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Eth uart breakout KiCad files?
From the OJ2016/pcb-common repository on GitHub, at the commit this page was made from: the board is siilo-system-test/eth-uart-breakout/eth-uart-breakout/eth-uart-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Eth uart breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask OJ2016 before reusing the design.
More from OJ2016/pcb-common
9- 2 layers137.7 × 45 mm
- 2 layers130.2 × 51.8 mm
- 2 layers90.6 × 20.3 mm
- 2 layers40 × 80.6 mm
- 2 layers58.8 × 63.8 mm
- 2 layers78.5 × 34.3 mm
- 2 layers79.9 × 15 mm
- 2 layers40.2 × 17.5 mm
Similar boards
- 2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
