Skip to the content
2 layers62.5 × 42.7 mmMtd415te, the printed circuit board in 3D
Size
62.5 × 42.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
23
Nets
35
Pads
99
Tracks, vias
155, 11
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
22 Aug 2019
Updated
15 Jul 2025

Overview

Mtd415te is an open-source printed circuit board by ograsdijk, from the ograsdijk/CeNTREX-pcb repository on GitHub. It is a 2-layer board of 62.5 × 42.7 mm with 23 parts on 35 nets, routed with 155 tracks and 11 vias.

It is built around the FT230XS-R, ISO7721DR-Y and SN74AHC1G04DCKR, with the SN74LVC1G3157DBV among its other parts. Its parts include 8 connectors, 6 capacitors, 4 resistors, 4 ICs and 1 inductor.

Main components

4

README

README.md

CeNTREX-pcb

Parts

23
QtyValueFootprintReferences
3Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ5, J6, J8
2100nCapacitor_SMD:C_0805_2012MetricC3, C4
227Resistor_SMD:R_0805_2012MetricR2, R3
247pCapacitor_SMD:C_0805_2012MetricC5, C6
2Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ3, J4
2RResistor_SMD:R_0805_2012MetricR1, R4
110501700011050170001:MOLEX_1050170001J2
110nCapacitor_SMD:C_0805_2012MetricC1
14.7uCapacitor_SMD:C_0805_2012MetricC2
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ7
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1FT230XS-Rdigikey-footprints:SSOP-16_W3.90mmU2
1ISO7721DRfootprints:ISO7721DRU3
1L_Core_FerriteInductor_SMD:L_0805_2012MetricL1
1SN74AHC1G04DCKRSN74AHC1G04DCKR:SOT65P210X110-5NU1
1SN74LVC1G3157SN74LVC1G3157:SC70-6U4

More from ograsdijk/CeNTREX-pcb

12
  • 2 layers128.5 × 137.9 mmMtd415te, the printed circuit board in 3D

    Mtd415te

    ograsdijk/CeNTREX-pcb

    28 parts1
  • 2 layers128.5 × 137.9 mmMtd415te, the printed circuit board in 3D

    Mtd415te

    ograsdijk/CeNTREX-pcb

    27 parts1
  • 2 layers95.3 × 99.1 mmMtd415te, the printed circuit board in 3D

    Mtd415te

    ograsdijk/CeNTREX-pcb

    26 parts1
  • 2 layers128.8 × 137.9 mmTeensy dio, the printed circuit board in 3D

    Teensy dio

    ograsdijk/CeNTREX-pcb

    25 parts1
  • 2 layers62.5 × 39.9 mmMtd415te, the printed circuit board in 3D

    Mtd415te

    ograsdijk/CeNTREX-pcb

    22 parts1
  • 2 layers96.3 × 94.7 mmPsu board, the printed circuit board in 3D

    Psu board

    ograsdijk/CeNTREX-pcb

    21 parts1

Similar boards

  • 2 layers165 × 110 mmClean room, the printed circuit board in 3D

    Clean room

    trieuhuyduc/Clean_room_slave

    ESP32-based slave controller board for cleanroom equipment — RS485/Modbus, isolated I/O, 220V mains control (KiCad)

    213 parts1
  • 4 layers100 × 100 mmPROJECT VD KICAD, the printed circuit board in 3D

    PROJECT VD KICAD

    anhbuianhanhbaba-ui/MY_KICAD_PROJECT

    104 parts
  • 4 layers100 × 90 mmOSBAMS Rev2 RC1, the printed circuit board in 3D

    OSBAMS Rev2 RC1

    hle12345/OSBAMS

    Moved here on 2026-10-01. The Rev.1 80x80 mm carrier PCB is a proven-prototype reference (circuits and interfaces that worked), not a design to revise or manufacture.

    149 partsMIT
  • 4 layers100 × 100 mmProject VD, the printed circuit board in 3D

    Project VD

    taitannguyen17022005-dev/MY_KICAD_PROJECT_VD

    112 parts
  • 2 layers46 × 46 mmNMEA2000Adapter-8.1, the printed circuit board in 3D

    NMEA2000Adapter-8.1

    rolandvs/ais_transponder

    A real, functioning low-power AIS transponder (class B)

    52 parts1GPL-3.0
  • 4 layers90 × 75 mmAuxiliary, the printed circuit board in 3D

    Auxiliary

    utof/eeg_ads1299_lab

    It is not a finished EEG recorder, a validated PCB, or permission to attach a circuit to a person. The firmware is a board-dependent bench-only starter using the ADS1299's internal test/short circuits.

    56 parts
  • 4 layers46 × 100 mmMusic32v3, the printed circuit board in 3D

    Music32v3

    Thecactusman0/Music32-V3

    Portable music player

    183 parts3GPL-3.0
  • 4 layers52.5 × 80 mmCharger compare, the printed circuit board in 3D

    Charger compare

    WillB97/lipo-chg-eval-pcb

    BQ25792/MP2759 LiPo Charger Evaluation Board

    110 parts2

Questions

How big is the Mtd415te PCB?

It measures 62.5 × 42.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mtd415te use?

23 parts, built around the FT230XS-R, ISO7721DR-Y, SN74AHC1G04DCKR and SN74LVC1G3157DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mtd415te KiCad files?

From the ograsdijk/CeNTREX-pcb repository on GitHub, at the commit this page was made from: the board is tec control/mtd415te/rev 1.0 - screw terminals/mtd415te.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mtd415te design in my own project?

Its repository states no licence, so its author keeps all rights: ask ograsdijk before reusing the design.