2 layers221 × 74.4 mm
2 layers62.5 × 39.9 mm
Mtd415te
ograsdijk/CeNTREX-pcb1- Size
- 62.5 × 39.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 42
- Pads
- 112
- Tracks, vias
- 161, 12
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Aug 2019
- Updated
- 15 Jul 2025
Overview
Mtd415te is an open-source printed circuit board by ograsdijk, from the ograsdijk/CeNTREX-pcb repository on GitHub. It is a 2-layer board of 62.5 × 39.9 mm with 22 parts on 42 nets, routed with 161 tracks and 12 vias.
It is built around the FT230XS-R and ISO7721DR-Y. Its parts include 7 connectors, 6 capacitors, 4 resistors, 4 ICs and 1 inductor.
Main components
2README
README.mdCeNTREX-pcb
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 27 | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | 47p | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3, J4 |
| 2 | R | Resistor_SMD:R_0805_2012Metric | R1, R4 |
| 1 | SN74LVC1G3157:SC70-6 | U4 | |
| 1 | SN74AHC1G04DCKR:SOT65P210X110-5N | U1 | |
| 1 | 1050170001:MOLEX_1050170001 | J2 | |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | DB15_Female | Connector_Dsub:DSUB-15_Female_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J5 |
| 1 | FT230XS-R | digikey-footprints:SSOP-16_W3.90mm | U2 |
| 1 | ISO7721DR | footprints:ISO7721DR | U3 |
| 1 | L_Core_Ferrite | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J6 |
Questions
How big is the Mtd415te PCB?
It measures 62.5 × 39.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mtd415te use?
22 parts, built around the FT230XS-R and ISO7721DR-Y. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mtd415te KiCad files?
From the ograsdijk/CeNTREX-pcb repository on GitHub, at the commit this page was made from: the board is tec control/mtd415te/rev 1.0 - db15/mtd415te.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mtd415te design in my own project?
Its repository states no licence, so its author keeps all rights: ask ograsdijk before reusing the design.
More from ograsdijk/CeNTREX-pcb
12- 2 layers221 × 74.4 mm
- 2 layers273.1 × 39.1 mm
- 2 layers55.6 × 80 mm
- 2 layers128.5 × 137.9 mm
- 2 layers128.5 × 137.9 mm
- 2 layers95.3 × 99.1 mm
- 2 layers128.8 × 137.9 mm
- 2 layers
- 2 layers62.5 × 42.7 mm
- 2 layers96.3 × 94.7 mm
- 2 layers62.2 × 33 mm
Similar boards
- 2 layers165 × 110 mm
Clean room
trieuhuyduc/Clean_room_slave
ESP32-based slave controller board for cleanroom equipment — RS485/Modbus, isolated I/O, 220V mains control (KiCad)
213 parts1 - 4 layers100 × 100 mm
- 4 layers100 × 90 mm
OSBAMS Rev2 RC1
hle12345/OSBAMS
Moved here on 2026-10-01. The Rev.1 80x80 mm carrier PCB is a proven-prototype reference (circuits and interfaces that worked), not a design to revise or manufacture.
149 partsMIT - 4 layers100 × 100 mm
- 2 layers46 × 46 mm
NMEA2000Adapter-8.1
rolandvs/ais_transponder
A real, functioning low-power AIS transponder (class B)
52 parts1GPL-3.0 - 4 layers90 × 75 mm
Auxiliary
utof/eeg_ads1299_lab
It is not a finished EEG recorder, a validated PCB, or permission to attach a circuit to a person. The firmware is a board-dependent bench-only starter using the ADS1299's internal test/short circuits.
56 parts - 2 layers229.9 × 111.8 mm
- 2 layers203.2 × 149.9 mm
