FullAdder
OfficialPixelBrush/PASS-2-4
A Diode-Transistor-Logic Adder System built from Scratch, with simplicity and robustness in mind
A Diode-Transistor-Logic Adder System built from Scratch, with simplicity and robustness in mind
FullAdder is an open-source printed circuit board by OfficialPixelBrush, from the OfficialPixelBrush/PASS-2-4 repository on GitHub. It is a 2-layer board of 139.7 × 94 mm with 61 parts on 36 nets, routed with 16 tracks and 0 vias.
Its parts include 31 resistors, 18 diodes and 12 transistors.
A Diode-Transistor-Logic Adder System built from Scratch, with simplicity and expandability in mind
![]()
![]()
![]()
| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24 +12 |
| 18 | D | Diode_THT:D_DO-35_SOD27_P2.54mm_Vertical_KathodeUp | D1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18 +2 |
| 12 | Q_NPN_CBE | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R5 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3 |
| 1 | 220k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
OfficialPixelBrush/PASS-2-4
A Diode-Transistor-Logic Adder System built from Scratch, with simplicity and robustness in mind
OfficialPixelBrush/PASS-2-4
A Diode-Transistor-Logic Adder System built from Scratch, with simplicity and robustness in mind
OfficialPixelBrush/PASS-2-4
A Diode-Transistor-Logic Adder System built from Scratch, with simplicity and robustness in mind

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

StuckAtPrototype/AirCube
Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

TeXitoi/keyseebee
KeySeeBee is a split ergo keyboard. It is only 2 PCB (so the name) with (almost) only SMD components on it. It's only a keyboard, no LED, no display, nothing more than keys and USB.


Jeija/esp8266-smartwatch
ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...


It measures 139.7 × 94 mm and has 2 copper layers, 1.6 mm thick.
61 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the OfficialPixelBrush/PASS-2-4 repository on GitHub, at the commit this page was made from: the board is KiCadFiles/oldFullAdder/FullAdder.kicad_pcb and its schematic KiCadFiles/FullAdder/FullAdder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask OfficialPixelBrush before reusing the design.