
GaN pwr delivery module
DhimanSarkar/GaN-Transistor-Power-Sequencing-Module
GaN Transistor Power Sequencing Module

PCB Coffee Coasters
Coffee coaster is an open-source printed circuit board by oddsocks1024, from the oddsocks1024/Coffee-Coaster-PCB-art- repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 90 × 90 mm with 19 parts on 43 nets, routed with 309 tracks and 31 vias.
It is built around the ATSAMD09C13A-SSU and LDO40LPURY. Its parts include 6 diodes, 4 ICs, 3 capacitors, 2 resistors and 2 transistors. It belongs with the SAM D and SAM boards of this library.

Novelty coffee coasters made out of PCB with electronic related puns. Includes a 3D printable holder for up to 5 coasters.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1N4448 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D4, D5, D6 |
| 3 | C | Capacitor_THT:C_Axial_L5.1mm_D3.1mm_P7.50mm_Horizontal | C1, C2, C3 |
| 3 | LED | LED_THT:LED_D5.0mm | D1, D2, D3 |
| 2 | 2N3906 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 27C040 | Package_DIP:DIP-32_W15.24mm_Socket | U1 |
| 1 | ATSAMD09C13A-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U4 |
| 1 | Conn_01x25_Pin | Connector_Dsub:DSUB-25_Socket_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm | J1 |
| 1 | LDO40LPURY | Package_DFN_QFN:DFN-6-1EP_3x3mm_P0.95mm_EP1.7x2.6mm | U2 |
| 1 | MCP9501 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | SW_DIP_x01 | Button_Switch_THT:SW_DIP_SPSTx01_Piano_10.8x4.1mm_W7.62mm_P2.54mm | SW1 |

DhimanSarkar/GaN-Transistor-Power-Sequencing-Module
GaN Transistor Power Sequencing Module



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support


nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

It measures 90 × 90 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the ATSAMD09C13A-SSU and LDO40LPURY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the oddsocks1024/Coffee-Coaster-PCB-art- repository on GitHub, at the commit this page was made from: the board is KiCAD-Project/coffee-coaster.kicad_pcb and its schematic KiCAD-Project/coffee-coaster.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).