
MANUEL ARGIBAYMOLINA ELECTRONICS
ManuelArgibay/Industrial-I-O-Controller
Industrial 24V I/O controller featuring protected high-side and low-side outputs, multiplexed analog and digital inputs, and MCU-based control.

GaN Transistor Power Sequencing Module
GaN pwr delivery module is an open-source printed circuit board by DhimanSarkar, from the DhimanSarkar/GaN-Transistor-Power-Sequencing-Module repository on GitHub. It is a 2-layer board with 47 parts on 32 nets, routed with 264 tracks and 283 vias.
It is built around the LM324, LDO40LPURY and LM317D2T, with the LT4256-1CS8#PBF, BAT54SW and AONS66920 among its other parts. Its parts include 14 capacitors, 11 resistors, 5 ICs, 4 diodes and 3 connectors.
Here're some of the project's best features:
This project is licensed under the CERN-OHL-S and GNU-GPL-3.0
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100k | Resistor_SMD:R_0805_2012Metric | R1, R2, R5, R7, R9, R32 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 4 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C5, C12, C34 |
| 3 | BAT54SW | Package_TO_SOT_SMD:SOT-323_SC-70 | D32, D33, D34 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric | C6, C11 |
| 2 | 200k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1, RV32 |
| 2 | 47uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10 |
| 2 | 62k | Resistor_SMD:R_0805_2012Metric | R3, R33 |
| 1 | 0.027 | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_6.3x9.9 | C2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_6.3x9.9 | C32 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 22uF | Capacitor_SMD:CP_Elec_6.3x9.9 | C33 |
| 1 | 27k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 27nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14 |
| 1 | AONS66920 | AONS66920:TRANS_AONS66920 | Q1 |
| 1 | BZV55C30 | Diode_SMD:D_MiniMELF | D1 |
| 1 | LDO40LPURY | Package_DFN_QFN:DFN-6-1EP_3x3mm_P0.95mm_EP1.7x2.6mm | U1 |
| 1 | LM2662MX_NOPB | LM2662MX_NOPB:SOIC127P599X175-8N | U2 |
| 1 | LM317D2T | LM317D2T:VREG_L7805ACD2T | U32 |
| 1 | LM324 | LM324DRG3:SOIC127P600X175-14N | U4 |
| 1 | LT4256-1CS8 | LT4256-1CS8:SO-8_S | U3 |
| 1 | OSC_switch | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | dcConn | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | J1 |
| 1 | drainConn | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | J3 |
| 1 | gateConn | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | J2 |

ManuelArgibay/Industrial-I-O-Controller
Industrial 24V I/O controller featuring protected high-side and low-side outputs, multiplexed analog and digital inputs, and MCU-based control.


Zergie/YAMMU
A Multi Material Unit (MMU) for eight filaments that can also function as a filament dryer and can keep it dry while printing. The design is heavily inspired by voron and their printers.

nhallsny/faraday-rescue
Open source battery for e-bikes made by the now-defunct Faraday Bicycles


AwesomeAudioApparatus/demiurge
Demiurge is a combination of Hardware and Software for Digital Sound Processing in the Eurorack Modular Synthesizer environment.

powermax555/Three-Half-Bridges
Half bridge module for use in larger power conversion and motor control systems

jakepoz/jpbms
JPBms is a simple BMS for solar charging and balancing a 3-cell lithium ion battery.
47 parts, built around the LM324, LDO40LPURY, LM317D2T and LT4256-1CS8#PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DhimanSarkar/GaN-Transistor-Power-Sequencing-Module repository on GitHub, at the commit this page was made from: the board is GaN_pwr_delivery_module.kicad_pcb and its schematic GaN_pwr_delivery_module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask DhimanSarkar before reusing the design.