Skip to the content
2 layers41.4 × 110.3 mmUncertainty, the printed circuit board in 3D

This readme needs to be updated to reflect this and to talk about the many other languages that people have used to create new firmware for Uncertainty.

Size
41.4 × 110.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
51
Nets
4
Pads
201
Tracks, vias
555, 44
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
25 Feb 2023
Updated
15 Jan 2026

Overview

Uncertainty is an open-source printed circuit board by oamodular, from the oamodular/uncertainty repository on GitHub. It is a 2-layer board of 41.4 × 110.3 mm with 51 parts on 4 nets, routed with 555 tracks and 44 vias.

It is built around the SN74HCS125QDRQ1 and APPA3010SURCK. Its parts include 19 resistors, 11 diodes, 10 connectors, 5 ICs and 1 capacitor. It belongs with the RP2040 boards of this library.

Main components

2

README

README.md

Uncertainty is now OSHW! both the software and the hardware!

This readme needs to be updated to reflect this and to talk about the many other languages that people have used to create new firmware for Uncertainty. Right now I just want to say that the 4hp DIY version of Uncertainty is still a work in progress. It's been built, but we're in the process of trying to figure out why it doesn't work. The 2hp SMT version of Uncertainty is the one that we sell here.

What remains below is the previous readme. It contains the pinout for Uncertainty's Seeeduino Xiao RP2040 and some example Python code…

Hack Uncertainty for fun and profit

Uncertainty's firmware is open-source and easy to swap with a humble USB-C cable. You can write your own firmware in C++, MicroPython, CircuitPython, and probably a bunch of other languages. It's startlingly easy to work and this document will outline the whole deal. Let's go…

Uncertainty’s Heart

We’re working with the mighty RP2040, a dual-core 133 MHz arm processor that is just a silly amount of power for outputting gates. Heck, you can easily overclock to over 300 MHz. Really hoping people make some messed up things.

Uncertainty’s I/O

  • one CV input that can recognize signals -5v to +5v (resolution is functionally close to 10-bit, so there probably isn’t quite the precision for v/oct)
  • eight +5v gate outputs that each have their own LED (if you turn on the gate, you turn on the LED; they can’t be decoupled)
  • a three pin I2C connector (this feature is experimental and largely untested)

To access this I/O use the following pins. You can use other pins, but they won’t work. I don’t know why you’d use other pins. Use these pins:

Pin #
CV input26
Gate 127
Gate 228
Gate 329
Gate 40
Gate 53
Gate 64
Gate 72
Gate 81
I2C SDA6
I2C SCL7

How to reinstall the default firmware

You hold down the boot button when you plug in the USB-C as described in the Getting started section. Then you drag uncertainty.uf2 onto the RPI-RP2 disk. It should then unmount. All set! The same works for any .uf2 firmware.

Parts

51
QtyValueFootprintReferences
9SWITCHCRAFT_35RASMT2AHNTRXImport Library:SWITCHCRAFT_35RASMT2AHNTRXJ1, J2, J3, J4, J5, J6, J7, J8, J9
8APPA3010SURCKImport Library:LED-SMD Red SideEmit Angle30 3x1mm -APPA3010SURCKD4, D5, D6, D7, D8, D9, D10, D11
8Out Resist-RES_ERJPA3D1001VImport Library:Out Resist-RES_ERJPA3D1001VR4, R5, R6, R7, R8, R9, R10, R11
8RESC1608X50NImport Library:RESC1608X50NR12, R13, R14, R15, R16, R17, R18, R19
3In Resist-ERJ-2RKF1003XImport Library:In Resist-ERJ-2RKF1003XR1, R2, R3
3SOD3715X145NImport Library:Diode-1N5819HW-7-F D1, D2, D3
2SN74HCS125QDRQ1 Import Library:Quad Bus-SMD SN74HCS125QDRQ1U3, U4
2Wurth 7466303 Import Library:Hardware-Right angle SMT mounting block-Wurth 7466303H1, H2
1CAP_EEE-FT1E220ARImport Library:CAP_EEE-FT1E220ARC1
1SAMTEC_TSM-103-01-L-SHImport Library:SAMTEC_TSM-103-01-L-SHJ10
1SAMTEC_TSM-105-01-L-DHImport Library:SAMTEC_TSM-105-01-L-DHPS1
1VREG_L7805CDT-TRImport Library:VREG_L7805CDT-TRU2
1VREG_LM1117IMPX-3.3/NOPBImport Library:VREG_LM1117IMPX-3.3_NOPBU1
1XIAO-RP2040Import Library:XIAO-RP2040U5

The 49 most common of 51 parts.

More from oamodular/uncertainty

1
  • 2 layers52.1 × 116.8 mmDIY Uncertainty, the printed circuit board in 3D

    DIY Uncertainty

    oamodular/uncertainty

    This readme needs to be updated to reflect this and to talk about the many other languages that people have used to create new firmware for Uncertainty.

    67 parts43

Similar boards

  • 2 layers216.9 × 86.8 mmSweepv2, the printed circuit board in 3D

    Sweepv2

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    51 parts2.1k
  • 2 layers49.4 × 94.2 mmPin board 1, the printed circuit board in 3D

    Pin board 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    51 parts1.2k
  • 2 layers72 × 42 mmNRF24 jammer, the printed circuit board in 3D

    NRF24 jammer

    W0rthlessS0ul/nRF24_jammer

    The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.

    51 parts1kMIT
  • 2 layers170 × 162 mmSnowflake, the printed circuit board in 3D

    Snowflake

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    51 parts915
  • 2 layers33 × 50 mmESP32-bat monitor latch, the printed circuit board in 3D

    ESP32-bat monitor latch

    pcbreflux/espressif

    all espressif stuff will committed here

    51 parts608GPL-3.0
  • 2 layersTUSS4470 shield, the printed circuit board in 3D

    TUSS4470 shield

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    51 parts530
  • 2 layers45.7 × 123.5 mmMASTER ARM PANEL, the printed circuit board in 3D

    MASTER ARM PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    51 parts431
  • 2 layers50.8 × 69.2 mmUikit, the printed circuit board in 3D

    Uikit

    vsfteam/vsf

    Versaloon Software Framework -- a tiny preemptive-capable event-driven incremental software framework for embedded systems

    51 parts341Apache-2.0

Questions

How big is the Uncertainty PCB?

It measures 41.4 × 110.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Uncertainty use?

51 parts, built around the SN74HCS125QDRQ1 and APPA3010SURCK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Uncertainty KiCad files?

From the oamodular/uncertainty repository on GitHub, at the commit this page was made from: the board is hardware/2hp-smt-uncertainty/Uncertainty.kicad_pcb and its schematic hardware/4hp-diy-uncertainty/DIY Plate/DIY Plate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Uncertainty design in my own project?

Its repository states no licence, so its author keeps all rights: ask oamodular before reusing the design.