2 layers100 × 65 mm
TL866II PLUS-25V-21V Adapter
ngc6589/TL866II-PLUS-25V-21V-Adapter
XGecu TL866II PLUS プログラマにて 2716/2732 UV-EPROM 書き込みのための 25V/21V を供給するサポートアダプターです。
31 parts8MIT
2 layers9.8 × 98.6 mm
Breakout 3
oamodular/breakout_old2A conduit from the USB on the rear of a module to the face of your modular setup. Breakout has a USB-A port on the rear that is routed to either the USB-A or USB-C port on the front.
- Size
- 9.8 × 98.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 10
- Pads
- 65
- Tracks, vias
- 84, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Mar 2023
- Updated
- 4 Jul 2023
Overview
Breakout 3 is an open-source printed circuit board by oamodular, from the oamodular/breakout_old repository on GitHub. It is a 2-layer board of 9.8 × 98.6 mm with 7 parts on 10 nets, routed with 84 tracks and 8 vias.
It is built around the SSSF040800. Its parts include 1 connector and 1 switch. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdBreakout
A conduit from the USB on the rear of a module to the face of your modular setup. Breakout has a USB-A port on the rear that is routed to either the USB-A or USB-C port on the front. The rear also has three-pin connector for I2C that is exposed with a mini-TRS socket on the front.
Between you me and the sea, we designed this to accompany several upcoming firmware for Uncertainty but realized this could be useful for lots of people. Modules like Instruo Lubadh and o_C (most versions) have USB on them that can be brought to the surface of your system.
Breakout is USB 2. USB 3 speeds are not supported.
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | USB_A_Molex_105057_Vertical | Connector_USB:USB_A_Molex_105057_Vertical | USB1, USB1 |
| 1 | PinHeader_1x03_P2.54mm_Vertical | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | H1 |
| 1 | SSSF040800 | Import Library:Switch-4PDT Vertical THT-SSSF040800 | SW1 |
| 1 | THONK_PJ398SM-12 | Import Library:Socket-3.5mm THT-Thonkiconn PJ398SM-12 | J1 |
| 1 | USB_C_Receptacle_GCT_USB4115-03-C | Connector_USB:USB_C_Receptacle_GCT_USB4115-03-C | USB3 |
The 6 most common of 7 parts.
Questions
How big is the Breakout 3 PCB?
It measures 9.8 × 98.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Breakout 3 use?
7 parts, built around the SSSF040800. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Breakout 3 KiCad files?
From the oamodular/breakout_old repository on GitHub, at the commit this page was made from: the board is Breakout 3.kicad_pcb and its schematic Breakout 3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Breakout 3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask oamodular before reusing the design.
Similar boards
- 2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT - 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0