Skip to the content
2 layers85.3 × 80 mmCB3, the printed circuit board in 3D

A repository for circuit schematics and PCB designs

Size
85.3 × 80 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
43
Pads
139
Tracks, vias
317, 16
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
29 Nov 2019
Updated
4 Oct 2021

Overview

CB3 is an open-source printed circuit board by oaklandsmartvehicles, from the oaklandsmartvehicles/SVC-Circuits repository on GitHub. It is a 2-layer board of 85.3 × 80 mm with 37 parts on 43 nets, routed with 317 tracks and 16 vias.

It is built around the LM324 and 2N7002H. Its parts include 18 resistors, 5 diodes, 5 connectors, 3 capacitors and 2 switches.

Main components

2

README

README.md

SVC-Circuits

9/21/20 Revision by: Ben Grudzien

  • Added PCB order instructions
  • Added pull-down resistor on Mosfet
  • Flipped voltage divider resistors
  • Made note of changes in schematic

Open Items:

This is a repository for circuit schematics and PCB designs

  • 'WiringDiagram' = High Level of Hardware components Drive-By-Wire System
  • 'ECUPrototypeIO' = Low Level detailed Schematics of Drive-By-Wire System
  • 'Conditioning Board' (CB3) = Digital Signal Processing Board (DSP) for ECU to Vehicle

9/9/20 Past Revision by: Ben Grudzien

  • Updated PCB to THT components for ease of soldering. Also made some minor layout adjustments
  • Noted on the schematic what areas needed to be physically tested
  • Updated BOM (Link Below)
  • Created new Gerber files for JLCpcb

Parts

37
QtyValueFootprintReferences
510KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR4, R5, R9, R11, R15
3100nFCapacitor_THT:C_Disc_D7.5mm_W5.0mm_P7.50mmC1, C2, C3
21MResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2
2220KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR8, R12
2330KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3, R7
2LD271LED_THT:LED_D5.0mm_IRGreyD4, D5
2MomentarySwitchButton_Switch_THT:SW_TH_Tactile_Omron_B3F-10xxSW1, SW2
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR18
11A FuseFuse:Fuse_Littelfuse-LVR100F1
11KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR17
11N4001Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD2
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR13
12N7002HPackage_TO_SOT_THT:SIPAK-1EP_Horizontal_TabDownQ1
13.3VDiode_THT:D_T-1_P5.08mm_HorizontalD1
1330Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR16
139KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR14
15.6KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR6
15.6VDiode_THT:D_T-1_P5.08mm_HorizontalD3
18.2KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR10
1ECU Connector 1Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mmJ1
1ECU Connector 2Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mmJ2
1LM324Package_DIP:DIP-14_W7.62mmU1
1Relay Module Con1Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mmJ5
1Relay Module Con2Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mmJ3
1Screw_Terminal_01x04TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-4_1x04_P2.54mm_HorizontalT1
1Vehicle Connector 1Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mmJ4

Similar boards

  • 2 layers135.8 × 119.9 mmBsidesPR, the printed circuit board in 3D

    BsidesPR

    So11Deo6loria/bsidesPRSun

    Please note that if the badge is running consistently, the battery life will be limited.

    81 parts5
  • 2 layers46 × 77 mmOn off module x1, the printed circuit board in 3D

    On off module x1

    AlanCarvalhoEE/hap

    Home Automation Platform with custom hardware and firmware (ESP8266), a Raspberry Pi–based server, and an Android client. Features modular IoT devices, TCP/IP and MQTT messaging, and a scalable system architecture.

    40 parts1
  • 2 layers55.8 × 42.5 mmGPXconn v2 rev3, the printed circuit board in 3D

    GPXconn v2 rev3

    GPXenergy/gpx_connector

    GPXconnector device connecting to dutch smart meter and sending data to the GPX API

    65 parts1MIT
  • 2 layers76.7 × 114.3 mmBHV Badge 2026, the printed circuit board in 3D

    BHV Badge 2026

    nathantsmith/BHV_Badge_2026

    KiCad PCB design files for the BHV badge: a wearable, off-grid messenger with a pulse sensor and a heartbeat made of light.

    36 parts1MIT
  • 2 layers96.6 × 85.5 mmRele wifi, the printed circuit board in 3D

    Rele wifi

    facc2/rele-wifi

    47 parts
  • 4 layers78 × 47 mmSummit scourer, the printed circuit board in 3D

    Summit scourer

    goodoldchap345/summit_scourer

    125 parts
  • 4 layers94.7 × 43 mm400W Amplifier, the printed circuit board in 3D

    400W Amplifier

    Hirusha785/400W-Class-D-Audio-Amplifier

    🎵 400W Class-D Audio Amplifier designed around the IRS2092S high-performance Class-D controller, featuring a ±55V power stage, discrete MOSFET switching section, LC output filter, protection circuitry, and a custom…

    50 partsMIT

Questions

How big is the CB3 PCB?

It measures 85.3 × 80 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CB3 use?

37 parts, built around the LM324 and 2N7002H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CB3 KiCad files?

From the oaklandsmartvehicles/SVC-Circuits repository on GitHub, at the commit this page was made from: the board is ECUPrototypeIO/ECUPrototypeIO/ConditioningBoard/CB3/CB3/CB3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the CB3 design in my own project?

Its repository states no licence, so its author keeps all rights: ask oaklandsmartvehicles before reusing the design.