

Nestbox
Perch-based automated population monitoring for birds.
- Size
- 85 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 150
- Nets
- 108
- Pads
- 545
- Tracks, vias
- 1,487, 382
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Mar 2022
- Updated
- 28 Oct 2026
Overview
Nestbox is an open-source printed circuit board by o16s, from the o16s/anisca-bird repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 85 × 55 mm with 150 parts on 108 nets, routed with 1,487 tracks and 382 vias.
It is built around the EM4095HMS, TPS62745DSS and ADS1220, with the DMG2301L-7(ES), ESD7205D and TPH1R712MD,L1Q(M among its other parts. Its parts include 54 resistors, 43 capacitors, 10 ICs, 10 connectors and 7 transistors. It belongs with the STM32 boards of this library.
Main components
6EM4095HMS
SOIC-16_3.9x9.9x1.27PSOIC-16 RF Transceiver ICs ROHSEM Microelectronic-Marin SARF Transceiver ICsTPS62745DSS
WSON-12-EP(2x3)-40℃~+125℃@(TJ) 1 1.8V~3.3V 3.3V~10V 300mA 400nA Buck Buck Built-in Fixed Yes WSON-12-EP(2x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersADS1220
UncategorisedTexas InstrumentsDMG2301L-7(ES)
SOT-23SOT-23 MOSFETs ROHSElecSuperMOSFETsESD7205D
SOT-7230.34pF 12.5V 16A 1uA 5.2V 5V ESD IEC 61000-4-2 SOT-723 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)TPH1R712MD,L1Q(M
SMD-8PUncategorisedToshiba
README
README.mdAnisca Bird

Overview
Anisca Bird is a smart weighing and tracking device developed by Octanis Instruments in collaboration with the Swiss Ornithological Institute. The system replaces a bird's regular roosting place with a weighing and tracking device that can register a bird's identity and body weight throughout the year without causing stress to the animal.
This repository contains the firmware, PCB design files, and mechanical designs to build and operate the Anisca Bird system.
Key Features
- RFID Identification: Automatically reads passive RFID tags attached to birds
- Weight Measurement: Precision load cell with 1g resolution when calibrated
- Data Storage: Onboard memory for up to 18 years of weight records
- Wireless Connectivity: Optional Sigfox connectivity for remote data transmission
- USB Connection: Easy data transfer via USB-C port
- Long Battery Life: Up to 1 year with the external battery box
- Modular Design: Easy to modify, repair, or upgrade
Repository Structure
/mechanical: Mechanical design files (STEP format)/nestbox-electronics-master: PCB design files for the main board, RFID antenna, and battery box/LF_Antenna_v3: RFID antenna PCB design/Nestbox_v3_3*: Main board iterations/battery_box: Battery box PCB design/lib_fp.pretty: KiCad footprint libraries/lib_sch: KiCad schematic libraries
/nestbox-firmware-REV3.3: Firmware source code/nestbox-fw: Core firmware files/Core: Main application code/Drivers: Hardware driver files/Middlewares: Middleware components/USB_DEVICE: USB communication stack
Hardware Overview
The Anisca Bird system consists of three main components:
-
Reader: Contains the main PCB with microcontroller, load cell interface, RFID reader, flash memory, and connectivity options. Housed in a water-resistant aluminum case.
-
Perch: Varnished plywood perch with integrated 125kHz RFID antenna for tag reading with up to 10cm range.
-
Battery Box: External battery case with four 10Ah NiMH D-cells providing up to 1 year of operation.
Firmware Overview
The firmware is built for STM32L433 microcontroller and provides the following functionality:
- RFID tag detection and decoding
- Weight measurement and analysis
- Low-power operation for extended battery life
- USB communication for data retrieval and configuration
- Optional Sigfox connectivity for remote data transmission
License
Where not otherwise specified, the GPL License applies.
Contact
For commercial support or to request an Anisca Bird system, please contact:
Octanis Instruments GmbH
Europa-Strasse 33, 8152 Glattbrugg, Switzerland
info@octanis.ch
www.octanis.ch
Parts
150| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | DNP | Resistor_SMD:R_0603_1608Metric | R105, R106, R204, R209, R210, R301, R402, R404, R405, R503, R505, R506, R509, R613, R614 |
| 13 | 0R | Resistor_SMD:R_0603_1608Metric | R501, R502, R507, R508, R605, R606, R607, R608, R609, R610, R611, R612, R618 |
| 10 | 10u | Capacitor_SMD:C_0805_2012Metric | C101, C201, C203, C208, C209, C210, C401, C501, C503, C610 |
| 9 | 100n | Capacitor_SMD:C_0603_1608Metric | C306, C307, C308, C313, C502, C504, C507, C606, C609 |
| 9 | 82k | Resistor_SMD:R_0603_1608Metric | R201, R202, R302, R304, R504, R601, R602, R603, R604 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R101, R102, R103, R104, R205, R401, R403 |
| 4 | 10n | Capacitor_SMD:C_0603_1608Metric | C310, C505, C506, C611 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C202, C311, C312, C608 |
| 3 | 100n 1% DNP | Capacitor_SMD:C_0603_1608Metric | C601, C603, C604 |
| 3 | 47R | Resistor_SMD:R_0603_1608Metric | R615, R616, R617 |
| 3 | DMG2301L-7 | Package_TO_SOT_SMD:SOT-23 | Q301, Q601, Q603 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H101, H102, H103 |
| 3 | NMOS 30V 4A | Package_TO_SOT_SMD:SOT-23 | Q501, Q602, Q604 |
| 2 | 100n DNP | Capacitor_SMD:C_0603_1608Metric | C605, C607 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric | C301, C302 |
| 2 | 1n5 450V C0G | Capacitor_SMD:C_0805_2012Metric | CRES502, CRES503 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric | C303, C304 |
| 2 | Conn_01x10_Female | Connector_PinSocket_2.00mm:PinSocket_1x10_P2.00mm_Vertical_SMD_Pin1Left | J401, J402 |
| 2 | ESD7205 | Package_TO_SOT_SMD:SOT-723 | D101, D302 |
| 2 | Jumper_NC_Small | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP206, JP301 |
| 1 | 0R | Capacitor_SMD:C_0603_1608Metric | CRES501 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric | R303 |
| 1 | 10p | Capacitor_SMD:C_0603_1608Metric | C206 |
| 1 | 10p 500V | Capacitor_SMD:C_0805_2012Metric | Cdiv501 |
| 1 | 10u | Inductor_SMD:L_0402_1005Metric | L301 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R206 |
| 1 | 162k 1% | Resistor_SMD:R_0603_1608Metric | R207 |
| 1 | 16MHz 10ppm 9pF | lib_fp:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y301 |
| 1 | 1Gb NAND Flash | lib_fp:8-LGA-6x8mm | U302 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R306 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric | R305 |
| 1 | 1n | Capacitor_SMD:C_0603_1608Metric | Cdiv502 |
| 1 | 1u DNP | Capacitor_SMD:C_0603_1608Metric | C602 |
| 1 | 1u or 4u7 for adjustable version | Capacitor_SMD:C_0603_1608Metric | C204 |
| 1 | 3.0V LDO | Package_TO_SOT_SMD:SOT-23-5 | U203 |
| 1 | 32kHz 20ppm 12.5pF | lib_fp:Crystal_SMD_MicroCrystal_CC7V-T1A-2Pin_3.2x1.5mm | Y302 |
| 1 | 330p | Capacitor_SMD:C_0603_1608Metric | C205 |
| 1 | 33p | Capacitor_SMD:C_0603_1608Metric | C207 |
| 1 | 4.7uH | Inductor_SMD:L_1008_2520Metric | L202 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R203 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C305 |
| 1 | 5V boost supply jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP202 |
| 1 | 5uH | Inductor_SMD:L_Taiyo-Yuden_NR-60xx_HandSoldering | L201 |
| 1 | 649k 1% | Resistor_SMD:R_0603_1608Metric | R208 |
| 1 | ADS1220 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U601 |
| 1 | Chassis Pin | lib_fp:SMD_PAD | J102 |
| 1 | Conn_RFID_SMA | lib_fp:SMA_Molex_EdgeMount | J502 |
| 1 | Conn_RFID_UFL_ALT | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J501 |
| 1 | DNP or 100n | Capacitor_SMD:C_0603_1608Metric | C508 |
| 1 | EM4095 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U501 |
| 1 | FC-M8-5 | Connector_Molex:Molex_PicoBlade_53398-0571_1x05-1MP_P1.25mm_Vertical | J101 |
| 1 | Jumper_3_Bridged12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP201 |
| 1 | LED_YELLOW | LED_SMD:LED_0603_1608Metric | D303 |
| 1 | LOAD_CELL_CONN_01X04 | Connector_Molex:Molex_PicoBlade_53398-0471_1x04-1MP_P1.25mm_Vertical | J602 |
| 1 | LOAD_CELL_CONN_01X04 | lib_fp:MB08MBSAFF04RA | J601 |
| 1 | LOGO | lib-fp-global:oi_logo_small | G101 |
| 1 | LTC3534 | Package_SO:SSOP-16_3.9x4.9mm_P0.635mm | U202 |
| 1 | Logo_Open_Hardware_Small | lib_fp:VogelwarteLogo3 | LOGO101 |
| 1 | Power Switch 2A, 800us soft start | lib_fp:IC_MIC94085YFT-TR | U401 |
| 1 | SIT1602BI 4.096 MHz | Oscillator:Oscillator_SMD_EuroQuartz_XO32-4Pin_3.2x2.5mm | U602 |
| 1 | STM32L433CCxx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mm | U301 |
| 1 | TC2030-MCP | lib-fp-global:TC2030-MCP-NL | P301 |
| 1 | TPH1R712MDL1Q | lib_fp:TDSON-8-1_HandSoldering | Q201 |
| 1 | TPS62745 | lib_fp:WSON_3x2mm_12pin | U201 |
| 1 | TVS DIODE 12V 23.7V | Diode_SMD:D_0402_1005Metric | D301 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J301 |
| 1 | VAA jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP204 |
| 1 | XBEE | lib_fp:XBEE | U402 |
| 1 | vsel 0.1 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP205 |
| 1 | vsel 0.2 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP203 |
More from o16s/anisca-bird
5- 2 layers64.8 × 53.2 mm

- 2 layers64.8 × 53.2 mm

- 2 layers150 × 92.1 mm

- 2 layers64.8 × 53.2 mm

- 2 layers16.9 × 139.7 mm

Similar boards
- 2 layers85 × 60 mm

- 4 layers100 × 100 mm

- 6 layers60 × 60 mm

High Temp Load Cell Toolhead Board
garethky/ADS1220-Klipper-Board
A board for connecting up to 4 Load cells to an ADS1220
125 parts23GPL-3.0 - 2 layers

Bb ads1220 old
OLIMEX/BB-ADS1220
OSHW Open Source Hardware breakboard for ADS1220 Low Power Preciese 24-bit ADC from Texas Instruments
9 parts16GPL-3.0 - 4 layers75 × 84.8 mm

- 2 layers80 × 50 mm

Device
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
22 parts - 2 layers21.6 × 19 mm

- 2 layers95 × 60 mm

Questions
How big is the Nestbox PCB?
It measures 85 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nestbox use?
150 parts, built around the EM4095HMS, TPS62745DSS, ADS1220 and DMG2301L-7(ES). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nestbox KiCad files?
From the o16s/anisca-bird repository on GitHub, at the commit this page was made from: the board is nestbox-electronics-master/Nestbox_v3/Nestbox.kicad_pcb and its schematic nestbox-electronics-master/Nestbox_v3_1/Load_Cell.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nestbox design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).