Skip to the content
2 layers22 × 18 mmI2c temp breakout, the printed circuit board in 3D

I2c temp breakout

nyquist-labs/projects

432 electrical-engineering projects by Anna Lin: predict from theory, measure by simulation or real data, compare, explain.

Size
22 × 18 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
5
Pads
23
Tracks, vias
47, 7
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
30 Sep 2026
Updated
30 Sep 2026

Overview

I2c temp breakout is an open-source printed circuit board by nyquist-labs, from the nyquist-labs/projects repository on GitHub. It is a 2-layer board of 22 × 18 mm with 8 parts on 5 nets, routed with 47 tracks and 7 vias.

Its parts include 3 resistors, 1 capacitor, 1 IC and 1 connector. It belongs with the interfaces and adapters boards of this library.

README

README.md

Nyquist Labs

Created and maintained by Anna Lin. Nyquist Labs is Anna Lin's independent project; it is not affiliated with any company or organisation of a similar name.

432 electrical-engineering projects Two tracks: a hands-on signal lab (circuits, power electronics, digital logic and HDL, DSP, communications, RF, control, embedded systems, biosignals, PCB design, browser tools) and an applied-mathematics track (complex analysis to information theory), built from two public project lists.

At a glance

Projects432 (index: PROJECTS.md, PROJECTS.csv)
Predicted-vs-measured comparisons2257
Comparisons with an explicit tolerance1426, of which 1357 within tolerance and 69 outside it (flagged no in the project table — wrong first guesses, rules of thumb that do not hold, or tolerances set tighter than the numerics)
Projects using real or recorded data90
Websitedocs/ (enable GitHub Pages on the docs folder) — searchable index and the interactive tools

Tracks and categories

TrackCategoryProjectsComparisonsWithin toleranceReal data
Applied Mathematics — 218 projects in electrical engineeringA. Complex analysis & phasors189688/921
Applied Mathematics — 218 projects in electrical engineeringB. Fourier analysis & transforms25132124/1294
Applied Mathematics — 218 projects in electrical engineeringC. Differential equations1810188/910
Applied Mathematics — 218 projects in electrical engineeringD. Linear algebra189176/801
Applied Mathematics — 218 projects in electrical engineeringE. Probability & stochastic processes2010596/1020
Applied Mathematics — 218 projects in electrical engineeringF. Optimisation155141/431
Applied Mathematics — 218 projects in electrical engineeringG. Numerical methods187970/700
Applied Mathematics — 218 projects in electrical engineeringH. Discrete math, finite fields & coding2016719/191
Applied Mathematics — 218 projects in electrical engineeringI. Control theory16136103/1040
Applied Mathematics — 218 projects in electrical engineeringJ. Statistics & learning on real signals2015087/9720
Applied Mathematics — 218 projects in electrical engineeringK. Fields, vector calculus & geometry15111106/1070
Applied Mathematics — 218 projects in electrical engineeringL. Information theory159162/638
Signal Lab — 214 electrical-engineering projectsA. Analog circuit design & simulation2512068/760
Signal Lab — 214 electrical-engineering projectsB. Power electronics127354/561
Signal Lab — 214 electrical-engineering projectsC. Digital logic & HDL2212016/170
Signal Lab — 214 electrical-engineering projectsD. Digital signal processing2511625/274
Signal Lab — 214 electrical-engineering projectsE. RF, radio & satellites (real signals)228021/2112
Signal Lab — 214 electrical-engineering projectsF. Communication systems156532/350
Signal Lab — 214 electrical-engineering projectsG. Electromagnetics & device physics156355/570
Signal Lab — 214 electrical-engineering projectsH. Embedded systems (simulated)207220/210
Signal Lab — 214 electrical-engineering projectsI. Control systems155221/280
Signal Lab — 214 electrical-engineering projectsJ. Biosignals & HCI (real patient data)21537/919
Signal Lab — 214 electrical-engineering projectsK. Interactive tools & web apps126238/4010
Signal Lab — 214 electrical-engineering projectsL. PCB design107140/428

Repository layout

text
eelab/            shared engine: Project/README generator, circuit simulator (MNA), HDL flow (Icarus + Yosys),
                  PCB toolkit (footprints, router, DRC, Gerber/KiCad export), field solvers, coding & comms,
                  from-scratch ML (eelab.ml), dataset fetchers with caching
projects/<track>/<category>/<ID>-<slug>/
    project.py    META (problem, theory, method) + run(p): predict → measure → compare → discuss
    README.md     generated: prediction-vs-measurement table, figures, discussion
    figures/ data/ results.json   (hdl/, web/, fab/, kicad/ where relevant)
run_all.py        runs projects in parallel and rebuilds PROJECTS.md/.csv and docs/
site/template.html  website template; docs/ is the generated site
tools/show.py     print a project's results table in the terminal

Running it

bash
python3 -m venv .venv && source .venv/bin/activate
pip install -r requirements.txt
python run_all.py                     # everything (first run downloads datasets into data_cache/)
python run_all.py --only AM-150 SL-205
python run_all.py --track applied-math --category H
python run_all.py --index-only        # rebuild the index and website from existing results
python tools/show.py AM150            # results table in the terminal

Requirements: Python 3.11+; Icarus Verilog (brew install icarus-verilog / apt install iverilog) for the HDL projects; Node.js to verify the JavaScript of the browser tools. A full run takes roughly half an hour on a laptop with 8 cores; a handful of projects (genetic-algorithm antenna design, the NumPy CNN, spherical-harmonic expansions) take several minutes each.

Datasets and licences

Datasets are downloaded at run time and cached locally; they are not redistributed in this repository and remain under their own licences. Please cite the original sources.

DatasetSourceLicenceLink
MIT-BIH Arrhythmia DatabasePhysioNet (Moody & Mark 2001)ODC Attribution Licensehttps://physionet.org/content/mitdb/
MIT-BIH Noise Stress Test DatabasePhysioNet (Moody et al. 1984)ODC Attribution Licensehttps://physionet.org/content/nstdb/
EEG Motor Movement/Imagery DatasetPhysioNet (Schalk et al. 2004)ODC Attribution Licensehttps://physionet.org/content/eegmmidb/
Sleep-EDF ExpandedPhysioNet (Kemp et al. 2000)ODC Attribution Licensehttps://physionet.org/content/sleep-edfx/
CHB-MIT Scalp EEG DatabasePhysioNet (Shoeb 2009)ODC Attribution Licensehttps://physionet.org/content/chbmit/
BIDMC PPG and Respiration DatasetPhysioNet (Pimentel et al. 2016)ODC Attribution Licensehttps://physionet.org/content/bidmc/
Examples of ElectromyogramsPhysioNetODC Attribution Licensehttps://physionet.org/content/emgdb/
Human Activity Recognition Using SmartphonesUCI ML Repository (Anguita et al. 2013)CC BY 4.0https://archive.ics.uci.edu/dataset/240
EMG data for gesturesUCI ML Repository (Lobov et al. 2018)CC BY 4.0https://archive.ics.uci.edu/dataset/481
Free Spoken Digit DatasetJakobovski et al.CC BY-SA 4.0https://github.com/Jakobovski/free-spoken-digit-dataset
Li-ion Battery Aging DatasetsNASA Ames Prognostics Center of Excellence (Saha & Goebel 2007)NASA open datahttps://www.nasa.gov/intelligent-systems-division/discovery-and-systems-health/pcoe/pcoe-data-set-repository/
Satellite observation recordings (NOAA APT)SatNOGS NetworkCC BY-SA 4.0https://network.satnogs.org/
Orbital elements (TLE)CelesTrakpublichttps://celestrak.org/
WSPR propagation spotsWSPRnet via wspr.livesee provider termshttps://wspr.live/
Mode S / ADS-B test capturedump1090 test files (antirez)BSD-3-Clausehttps://github.com/antirez/dump1090
'Hello' pronunciation audioWikimedia CommonsCC BY-SAhttps://commons.wikimedia.org/wiki/File:En-us-hello.ogg
KiCad footprint library (reference footprints)KiCad projectCC BY-SA 4.0 with exceptionhttps://gitlab.com/kicad/libraries/kicad-footprints
Alice's Adventures in WonderlandProject Gutenberg eBook #11public domainhttps://www.gutenberg.org/ebooks/11

Licence

Code and generated documents: MIT (see LICENSE). Third-party data: see above.

Parts

8
QtyValueFootprintReferences
24.7keelab:C_0603R1, R2
2MountingHole_2.2mmeelab:MountingHole_2.2mmH1, H2
1100neelab:C_0603C1
110keelab:C_0603R3
1LM75-classeelab:SOIC-8U1
1VCC/GND/SCL/SDA/OSeelab:PinHeader_1x05_P2.54mmJ1

More from nyquist-labs/projects

5
  • 2 layers50 × 36 mmPreamp v2, the printed circuit board in 3D

    Preamp v2

    nyquist-labs/projects

    432 electrical-engineering projects by Anna Lin: predict from theory, measure by simulation or real data, compare, explain.

    24 parts
  • 2 layers50 × 36 mmPreamp, the printed circuit board in 3D

    Preamp

    nyquist-labs/projects

    432 electrical-engineering projects by Anna Lin: predict from theory, measure by simulation or real data, compare, explain.

    22 parts
  • 2 layers68.6 × 53.3 mmUno shield, the printed circuit board in 3D

    Uno shield

    nyquist-labs/projects

    432 electrical-engineering projects by Anna Lin: predict from theory, measure by simulation or real data, compare, explain.

    16 parts
  • 2 layers44 × 32 mmLm317 5v psu, the printed circuit board in 3D

    Lm317 5v psu

    nyquist-labs/projects

    432 electrical-engineering projects by Anna Lin: predict from theory, measure by simulation or real data, compare, explain.

    14 parts
  • 2 layers50 × 20 mmRf thru 50ohm, the printed circuit board in 3D

    Rf thru 50ohm

    nyquist-labs/projects

    432 electrical-engineering projects by Anna Lin: predict from theory, measure by simulation or real data, compare, explain.

    2 parts

Similar boards

  • 2 layers20.5 × 24.8 mmPi interface, the printed circuit board in 3D

    Pi interface

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    8 parts3.7k
  • 2 layers59.9 × 25.7 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    8 parts1kGPL-3.0
  • 2 layers52 × 12.6 mmUSB, the printed circuit board in 3D

    USB

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    8 parts960Apache-2.0
  • 2 layers87.5 × 48.5 mm7 input macropad, the printed circuit board in 3D

    7 input macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    8 parts915
  • 2 layers36.2 × 63.1 mmPicoMemcard pico, the printed circuit board in 3D

    PicoMemcard pico

    dangiu/PicoMemcard

    Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

    8 parts694GPL-3.0
  • 2 layers36 × 10 mmPCB4-PWR BTN Rev.A, the printed circuit board in 3D

    PCB4-PWR BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    8 parts578Apache-2.0

Questions

How big is the I2c temp breakout PCB?

It measures 22 × 18 mm and has 2 copper layers, 1.6 mm thick.

What parts does the I2c temp breakout use?

8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the I2c temp breakout KiCad files?

From the nyquist-labs/projects repository on GitHub, at the commit this page was made from: the board is projects/signal-lab/L-pcb-design/SL206-sensor-breakout-board/kicad/i2c_temp_breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the I2c temp breakout design in my own project?

Its repository states no licence, so its author keeps all rights: ask nyquist-labs before reusing the design.