
Battery charger
Ben-Fapohunda/Li-ion-battery-charger
A compact single-cell Li-ion charger powered over USB-C, with a built-in monitor that shows battery voltage and charge current on a small OLED.

Bluetooth Keyboard made using kicad software
Wireless Tenkeyless Keyboard is an open-source printed circuit board by nwasr, from the nwasr/Wireless-Tenkeyless-Keyboard repository on GitHub. It is a 2-layer board of 366.2 × 174.8 mm with 204 parts on 140 nets, routed with 774 tracks and 45 vias.
It is built around the ESP32-S3-WROOM-1-N16R8, MCP73871EV and AP2112K-3.3. Its parts include 87 diodes, 66 switches, 9 capacitors, 9 resistors and 3 ICs. It belongs with the keyboards and input boards and the ESP32 boards of this library.
A compact wireless mechanical keyboard designed using the ESP32-WROOM-S3 module. This project was developed as part of academic coursework.
Disclaimer:
This design has not been fabricated or tested on hardware. Use at your own risk.



The design follows a modular, hierarchical schematic structure:
Full schematic: schematic.pdf

| Qty | Value | Footprint | References |
|---|---|---|---|
| 87 | D | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +71 |
| 6 | R_Small | Resistor_SMD:R_0603_1608Metric | R1, R2, R5, R6, R7, R8 |
| 5 | 1uF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C6, C7, C8 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | C_Small | Capacitor_SMD:C_0603_1608Metric | C1, C9 |
| 1 | ! 1 | myLibrary:MX_PCB_1.00u | SW18 |
| 1 | " ' | myLibrary:MX_PCB_1.00u | SW62 |
| 1 | # 3 | myLibrary:MX_PCB_1.00u | SW20 |
| 1 | $ 4 | myLibrary:MX_PCB_1.00u | SW21 |
| 1 | % 5 | myLibrary:MX_PCB_1.00u | SW22 |
| 1 | & 7 | myLibrary:MX_PCB_1.00u | SW24 |
| 1 | ( 9 | myLibrary:MX_PCB_1.00u | SW26 |
| 1 | ) 0 | myLibrary:MX_PCB_1.00u | SW27 |
| 1 | * 8 | myLibrary:MX_PCB_1.00u | SW25 |
| 1 | + = | myLibrary:MX_PCB_1.00u | SW29 |
| 1 | - _ | myLibrary:MX_PCB_1.00u | SW28 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 450404015514 | myLibrary:450404015514 | S1 |
| 1 | : ; | myLibrary:MX_PCB_1.00u | SW61 |
| 1 | < , | myLibrary:MX_PCB_1.00u | SW72 |
| 1 | > . | myLibrary:MX_PCB_1.00u | SW73 |
| 1 | ? / | myLibrary:MX_PCB_1.00u | SW74 |
| 1 | @ 2 | myLibrary:MX_PCB_1.00u | SW19 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_PTS645 | SW88 |
| 1 | ESP32-S3-WROOM-1-N16R8 | myLibrary:ESP32-S3-WROOM-1_EXP | U1 |
| 1 | I | myLibrary:MX_PCB_1.00u | SW42 |
| 1 | K | myLibrary:MX_PCB_1.00u | SW59 |
| 1 | L | myLibrary:MX_PCB_1.00u | SW60 |
| 1 | LOGO | LOGO | G*** |
| 1 | Lipo Cell | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J3 |
| 1 | MCP73871 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U3 |
| 1 | Menu | myLibrary:MX_PCB_1.25u | SW83 |
| 1 | O | myLibrary:MX_PCB_1.00u | SW43 |
| 1 | P | myLibrary:MX_PCB_1.00u | SW44 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | Win | myLibrary:MX_PCB_1.25u | SW82 |
| 1 | ^ 6 | myLibrary:MX_PCB_1.00u | SW23 |
| 1 | a | myLibrary:MX_PCB_1.00u | SW52 |
| 1 | b | myLibrary:MX_PCB_1.00u | SW69 |
| 1 | backspace | myLibrary:MX_PCB_2.00u | SW30 |
| 1 | c | myLibrary:MX_PCB_1.00u | SW67 |
| 1 | caps lock | myLibrary:MX_PCB_1.00u | SW51 |
| 1 | d | myLibrary:MX_PCB_1.00u | SW54 |
| 1 | delete | myLibrary:MX_PCB_1.00u | SW48 |
| 1 | downarrow | myLibrary:MX_PCB_1.00u | SW86 |
| 1 | e | myLibrary:MX_PCB_1.00u | SW37 |
| 1 | end | myLibrary:MX_PCB_1.00u | SW49 |
| 1 | enter | myLibrary:MX_PCB_2.25u | SW63 |
| 1 | esc | myLibrary:MX_PCB_1.00u | SW1 |
| 1 | f | myLibrary:MX_PCB_1.00u | SW55 |
| 1 | f1 | myLibrary:MX_PCB_1.00u | SW2 |
| 1 | f10 | myLibrary:MX_PCB_1.00u | SW11 |
| 1 | f11 | myLibrary:MX_PCB_1.00u | SW12 |
| 1 | f12 | myLibrary:MX_PCB_1.00u | SW13 |
| 1 | f2 | myLibrary:MX_PCB_1.00u | SW3 |
| 1 | f3 | myLibrary:MX_PCB_1.00u | SW4 |
| 1 | f4 | myLibrary:MX_PCB_1.00u | SW5 |
| 1 | f5 | myLibrary:MX_PCB_1.00u | SW6 |
| 1 | f6 | myLibrary:MX_PCB_1.00u | SW7 |
| 1 | f7 | myLibrary:MX_PCB_1.00u | SW8 |
| 1 | f8 | myLibrary:MX_PCB_1.00u | SW9 |
| 1 | f9 | myLibrary:MX_PCB_1.00u | SW10 |
| 1 | g | myLibrary:MX_PCB_1.00u | SW56 |
| 1 | h | myLibrary:MX_PCB_1.00u | SW57 |
| 1 | home | myLibrary:MX_PCB_1.00u | SW32 |
| 1 | insert | myLibrary:MX_PCB_1.00u | SW31 |
| 1 | j | myLibrary:MX_PCB_1.00u | SW58 |
| 1 | lalt | myLibrary:MX_PCB_1.25u | SW79 |
| 1 | lctrl | myLibrary:MX_PCB_1.25u | SW77 |
| 1 | leftarrow | myLibrary:MX_PCB_1.00u | SW85 |
| 1 | lshift | myLibrary:MX_PCB_2.25u | SW64 |
| 1 | lwin | myLibrary:MX_PCB_1.25u | SW78 |
| 1 | m | myLibrary:MX_PCB_1.00u | SW71 |
| 1 | n | myLibrary:MX_PCB_1.00u | SW70 |
| 1 | pause break | myLibrary:MX_PCB_1.00u | SW16 |
| 1 | pgdn | myLibrary:MX_PCB_1.00u | SW50 |
| 1 | pgup | myLibrary:MX_PCB_1.00u | SW33 |
The 181 most common of 204 parts.

Ben-Fapohunda/Li-ion-battery-charger
A compact single-cell Li-ion charger powered over USB-C, with a built-in monitor that shows battery voltage and charge current on a small OLED.

ndesserich/ECE-36200-Final-Project-PCB
A PCB that integrates an RP2350 and various peripherals to play games.

sneurlax/hip-badge
And join our matrix discussion channel: https://matrix.to/#/#hipbadge:matrix.org

andrewcnjuguna/ESP32_BME690
Multi-room ESP32-S3 environmental sensor node that streams air-quality data to a Node.js server over Wi-Fi. Built around the Bosch BME690 with auxiliary light, sound and battery monitoring.


zeodotdev/zeo-boards
ESP32-S3 development board with onboard BME280 (temperature, humidity, pressure) and LSM6DS3 (6-axis IMU) sensors. This repo contains the designs, ESP-IDF firmware, and a Python plotter for visualization.


It measures 366.2 × 174.8 mm and has 2 copper layers, 1.6 mm thick.
204 parts, built around the ESP32-S3-WROOM-1-N16R8, MCP73871EV and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nwasr/Wireless-Tenkeyless-Keyboard repository on GitHub, at the commit this page was made from: the board is hardware/main.kicad_pcb and its schematic hardware/Keyboard_Matrix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nwasr before reusing the design.