
Coco2
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

PCB Design of Game Pad
Gampad Project is an open-source printed circuit board by nugiedwika, from the nugiedwika/gamepad repository on GitHub. It is a 4-layer board of 124 × 60 mm with 35 parts on 39 nets, routed with 203 tracks and 0 vias.
It is built around the NE555P. Its parts include 11 resistors, 7 capacitors, 4 diodes, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Hi! This is my new project to review my experience in PCB Design
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11 |
| 6 | 100n | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3, C4, C5, C6, C7 |
| 4 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | DOWN, LEFT, RIGHT, UP |
| 3 | LED | LED_THT:LED_D5.0mm | D1, D3, D4 |
| 1 | 470u | Capacitor_THT:CP_Axial_L11.0mm_D6.0mm_P18.00mm_Horizontal | C1 |
| 1 | A | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | ESC |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | ARDUINO NANO V3 |
| 1 | B | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | ENTER |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BUZZER |
| 1 | Conn_Battery | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J1 |
| 1 | D_Schottky | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D2 |
| 1 | I2C_OLED_MODULE | I2C_OLED:I2C_OLED_Module | LCD OLED 128x64 |
| 1 | LOGO | LOGO | G*** |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | ON / OFF | Button_Switch_THT:SW_E-Switch_EG1271_SPDT | SW1 |

baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus



benjiaomodular/SynthCard
I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

hackup/C128Diag
Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.
It measures 124 × 60 mm and has 4 copper layers, 4.69 mm thick.
35 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nugiedwika/gamepad repository on GitHub, at the commit this page was made from: the board is Gamepad_Project/Gampad_Project/Gampad_Project.kicad_pcb and its schematic Gamepad_Project/Gampad_Project/Gampad_Project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nugiedwika before reusing the design.