2 layers6.4 × 14 mm
Micro T Probe
nthrd/MicroTProbe
A breakout for the TMP102 from Texas Instruments small enough to fit inside a ¼ inch copper tube.
11 partsCC-BY-SA-4.0
2 layers14 × 10.2 mm
MicrotoBB
nthrd/MicroTProbeA breakout for the TMP102 from Texas Instruments small enough to fit inside a ¼ inch copper tube.
- Size
- 14 × 10.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 5
- Pads
- 15
- Tracks, vias
- 20, 4
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 9 Jul 2014
- Updated
- 3 Aug 2014
Overview
MicrotoBB is an open-source printed circuit board by nthrd, from the nthrd/MicroTProbe repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 14 × 10.2 mm with 3 parts on 5 nets, routed with 20 tracks and 4 vias.
It belongs with the interfaces and adapters boards of this library.
README
README.mdMicroTProbe
A breakout for the [TMP102] 1 from Texas Instruments small enough to fit inside a ¼ inch copper tube. This was inspired by the [SparkFun breakout board] 2 for the same chip.
This is designed to be used with 1/4 inch copper tube and thermal putty to create a water-sealed temperature probe. Instead of using a header to hookup, magnet wire is threaded through the holes and soldered. Using a solderable magnet wire is recommended.
Source Files are a KiCAD project.
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | CONN_5 | Thread_5 | P1, P2 |
| 1 | CONN_5 | PIN_ARRAY_5x1 | P3 |
Questions
How big is the MicrotoBB PCB?
It measures 14 × 10.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MicrotoBB use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MicrotoBB KiCad files?
From the nthrd/MicroTProbe repository on GitHub, at the commit this page was made from: the board is MicrotoBB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MicrotoBB design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from nthrd/MicroTProbe
1Similar boards
- 2 layers40 × 30 mm
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT