4 layers31 × 15 mm
2 layers
Optocoupler pmosfet driver
ntchris/ElectronicDesignmy electronicDeisgns
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 11
- Pads
- 28
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 Oct 2016
- Updated
- 29 Nov 2022
Overview
Optocoupler pmosfet driver is an open-source printed circuit board by ntchris, from the ntchris/ElectronicDesign repository on GitHub. It is a 2-layer board with 10 parts on 11 nets.
It is built around the S9013. Its parts include 6 resistors, 2 transistors, 1 IC and 1 diode.
Main components
1Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1.5k | myFootPrintLibs:R_C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | R4 |
| 1 | 1.5k | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R2 |
| 1 | 10k | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R6 |
| 1 | 20k | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R3 |
| 1 | 510 | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R1 |
| 1 | 800 | myFootPrintLibs:R_C_0805_2012Metric_Pad1.20x1.50mm_HandSolder | R5 |
| 1 | AOD403_pmosfet | myFootPrintLibs:TO-252-2 | Q2 |
| 1 | PC817 | ultralib:EL817S1CTU-F | U1 |
| 1 | S9013 | myFootPrintLibs:SOT-23_PNP_NPN | Q1 |
| 1 | zener 5.1V | myFootPrintLibs:D_MiniMELF_Handsoldering_Zener | D1 |
Questions
What parts does the Optocoupler pmosfet driver use?
10 parts, built around the S9013. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Optocoupler pmosfet driver KiCad files?
From the ntchris/ElectronicDesign repository on GitHub, at the commit this page was made from: the board is testCircuit/mosfetGateDriver/optocoupler_mosfet_gatedriver/optocoupler_pmosfet_driver.kicad_pcb and its schematic testCircuit/mosfetGateDriver/optocoupler_mosfet_gatedriver/optocoupler_pmosfet_driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Optocoupler pmosfet driver design in my own project?
Its repository states no licence, so its author keeps all rights: ask ntchris before reusing the design.
Similar boards
- 2 layers54 × 85.6 mm
Board43
smartbank-inc/Board43
Board43 is an RP2350A-based microcontroller development board. Flash PicoRuby or your favorite firmware and start hacking.
583 parts30 - 2 layers69.9 × 38.1 mm
MicPreampTest
open-headset-interconnect-standard/ohis
An open standard for a common interconnect between headsets and radios.
14 parts28 - 2 layers41.6 × 20 mm
WebastoWBUSInterface
stuartpittaway/WebastoWBUSInterface
Hardware circuit diagram for interfacing to the Webasto WBUS interface from a PC/Arduino
16 parts25GPL-3.0 - 2 layers187.3 × 109.5 mm
Z80RP2350b
kysilv/z80-rp2350b-zx-compatible
Retrocomputer compatible with ZX Spectrum based on real Z80 + discrete RAM/ROM + rp2350b as ULA
131 parts9GPL-3.0 - 2 layers100 × 97.5 mm
MC5000 Board
RickP/MC5000_DevKit
An hardware puzzle that teaches the basics of programming.
131 parts6GPL-3.0 - 2 layers60.4 × 112.5 mm
- 4 layers40 × 40 mm
