2 layers98.8 × 55.1 mm
H bridge controller
jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller
104 parts5MIT
2 layers104 × 81 mm
SP26 CabinetClub LockboxControl JohnPinto
NStrachen/ECE455_SP26- Size
- 104 × 81 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 41
- Pads
- 124
- Tracks, vias
- 203, 18
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 May 2026
- Updated
- 6 May 2026
Overview
SP26 CabinetClub LockboxControl JohnPinto is an open-source printed circuit board by NStrachen, from the NStrachen/ECE455_SP26 repository on GitHub. It is a 2-layer board of 104 × 81 mm with 39 parts on 41 nets, routed with 203 tracks and 18 vias.
It is built around the IRF3205 and SS34. Its parts include 10 connectors, 9 resistors, 9 diodes, 9 transistors and 1 IC.
Main components
2README
README.mdECE455_SP26
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | Conn_01x02_Pin | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10 |
| 9 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 9 | IRF3205 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9 |
| 9 | SS34 | Diode_SMD:D_SMA | D1, D2, D3, D5, D6, D7, D8, D9, D10 |
| 1 | 12V | TestPoint:TestPoint_Keystone_5000-5004_Miniature | PS1 |
| 1 | Raspberry_Pi_4 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical_SMD | U1 |
Questions
How big is the SP26 CabinetClub LockboxControl JohnPinto PCB?
It measures 104 × 81 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SP26 CabinetClub LockboxControl JohnPinto use?
39 parts, built around the IRF3205 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SP26 CabinetClub LockboxControl JohnPinto KiCad files?
From the NStrachen/ECE455_SP26 repository on GitHub, at the commit this page was made from: the board is SP26_CabinetClub_LockboxControl_JohnPinto.kicad_pcb and its schematic SP26_CabinetClub_LockboxControl_JohnPinto.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SP26 CabinetClub LockboxControl JohnPinto design in my own project?
Its repository states no licence, so its author keeps all rights: ask NStrachen before reusing the design.
Similar boards
- 2 layers100 × 100 mm
- 2 layers77.7 × 73.2 mm
BMT BionX Minimum Translator vereinfacht
stancecoke/BionX_Minimal_Translator
Drive your BionX motor with a no-name battery and a Kunteng LCD-display without any further BionX-components
40 parts22GPL-3.0 - 2 layers50.2 × 73 mm
- 2 layers90 × 44 mm
- 2 layers80 × 100 mm
- 4 layers104.1 × 132.6 mm
- 2 layers92.6 × 52 mm
SineWaveInverter
ampnics/Project-10
Mater KiCad with Projects is a series of lectures in which we are learning PCB designing
44 parts2