2 layers80 × 130 mm
ProyectoFinalCarrito2
Carlos-Santos-prog/rc-car-esp32
Vehículo RC de combate con seguidor de línea basado en ESP32. Diseño electrónico completo en KiCad 10.
93 partsMIT
2 layers80 × 100 mm
CustomPCB
Cpp-homies/MAPLE4M.A.P.L.E: Modular Automated Plant Life Enclosure
- Size
- 80 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 48
- Pads
- 111
- Tracks, vias
- 196, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 22 Feb 2023
- Updated
- 6 Jun 2023
Overview
CustomPCB is an open-source printed circuit board by Cpp-homies, from the Cpp-homies/MAPLE repository on GitHub, published under the MIT licence. It is a 2-layer board of 80 × 100 mm with 23 parts on 48 nets, routed with 196 tracks and 0 vias.
It is built around the ESP32-DEVKITC-VE and IRF3205. Its parts include 2 transistors, 1 capacitor, 1 resistor and 1 IC. It belongs with the ESP32 boards of this library.
Main components
2README
README.mdM.A.P.L.E: Modular Automated Plant Life Enclosure
Introduction to the project
Welcome to the public repository for our Design Thinking and Advanced Prototyping (ELEC-C9821) project, completed during the spring of 2023. Here, you can track the progress of our product development and review the process we followed to arrive at our final solution.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | BME280, Camera1, OLEDScreen1, StepperMotor1 |
| 4 | Screw_Terminal_01x02 | TerminalBlock_2x5mm:691502710002 | 5VIN1, 12VIN1, 12VLIGHTS1, 12VOUT1 |
| 2 | IRF3205 | IRF3205STRLPBF:TO254P1524X483-4N | Q1, Q2 |
| 1 | 100uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | LightSensor1 |
| 1 | Conn_01x03 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | FAN1 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SoilSensor1 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | Rotary1 |
| 1 | Conn_01x06_Female | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | microSD1 |
| 1 | ESP32-DEVKITC | ESP32:MODULE_ESP32-DEVKITC | U1 |
| 1 | Pololu_Breakout_DRV8825 | Module:Pololu_Breakout-16_15.2x20.3mm | A1 |
The 19 most common of 23 parts.
Questions
How big is the CustomPCB PCB?
It measures 80 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CustomPCB use?
23 parts, built around the ESP32-DEVKITC-VE and IRF3205. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CustomPCB KiCad files?
From the Cpp-homies/MAPLE repository on GitHub, at the commit this page was made from: the board is Embedded/PCB/customPCB/customPCB.kicad_pcb and its schematic Embedded/PCB/customPCB/customPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CustomPCB design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers77.7 × 73.2 mm
BMT BionX Minimum Translator vereinfacht
stancecoke/BionX_Minimal_Translator
Drive your BionX motor with a no-name battery and a Kunteng LCD-display without any further BionX-components
40 parts22GPL-3.0 - 2 layers50.2 × 73 mm
- 2 layers98.8 × 55.1 mm
H bridge controller
jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller
104 parts5MIT - 2 layers90 × 44 mm
- 4 layers104.1 × 132.6 mm
- 2 layers92.6 × 52 mm
SineWaveInverter
ampnics/Project-10
Mater KiCad with Projects is a series of lectures in which we are learning PCB designing
44 parts2 - 2 layers65 × 30 mm
