2 layers100 × 80 mm
2 layers88.9 × 88.9 mm
Kinetis
nrclark/kinetis-evalEvaluation board for the NXP Kinetis KL16 microcontroller.
- Size
- 88.9 × 88.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 100
- Pads
- 317
- Tracks, vias
- 949, 114
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170123)
- Created
- 12 Mar 2017
- Updated
- 3 Apr 2017
Overview
Kinetis is an open-source printed circuit board by nrclark, from the nrclark/kinetis-eval repository on GitHub. It is a 2-layer board of 88.9 × 88.9 mm with 82 parts on 100 nets, routed with 949 tracks and 114 vias.
It is built around the MKL16Z64VLH4 and LM1117-ADJ. Its parts include 28 resistors, 20 capacitors, 9 diodes, 7 connectors and 6 switches. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
2
MKL16Z64VLH4
LQFP-64(10x10)-40℃~+105℃ 1.71V~3.6V 12bit 16bit 32 Bit 48MHz 54 64KB 8KB ARM Cortex-M0+ Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSNXP SemiconductorsMicrocontrollers (MCU/MPU/SOC)
LM1117-ADJ
SOT-2231 1.2V~5V 1.3V@(1000mA) 15V 1A 2mA Adjustable Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
README
README.mdThis repo will contain the KiCAD design files for a Kinetis KL16 eval board. The target part is the MKL16Z64VLH4.
Status
At present, the schematic and PCB have both been designed. Fabrication will be the next step.
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 0.1uF | custom_footprints:SM_0603 | C1, C2, C3, C6, C7, C8, C9, C11, C12, C13, C14, C17, C18, C19, C20 |
| 11 | 0.1 | custom_footprints:SM_0805 | R6, R8, R10, R11, R12, R19, R20, R21, R22, R23, R24 |
| 7 | 200 | custom_footprints:SM_0805 | R2, R3, R4, R13, R14, R25, R26 |
| 5 | 10k | custom_footprints:SM_0805 | R1, R7, R15, R16, R28 |
| 5 | SPST | custom_footprints:PTS645_SMT | SW2, SW3, SW4, SW5, SW6 |
| 4 | #4-40 Mounting Hole | custom_footprints:4_40_Hole | M1, M2, M3, M4 |
| 4 | 400mV@0.5A | custom_footprints:SOD_123F | D2, D3, D4, D5 |
| 4 | CONN_01X16 | custom_footprints:Header_0.1in_1x16 | J2, J4, J6, J7 |
| 4 | Green | custom_footprints:D_0805 | D6, D7, D8, D9 |
| 3 | 22uF | custom_footprints:SM_1206 | C4, C5, C10 |
| 3 | DNP | custom_footprints:SM_0805 | R9, R17, R18 |
| 2 | 120 | custom_footprints:SM_0805 | R5, R27 |
| 2 | 27pF | custom_footprints:SM_0603 | C15, C16 |
| 1 | 12.000 MHz | custom_footprints:SM_HC49US | Y1 |
| 1 | 500mA PTC | custom_footprints:SM_1812 | F1 |
| 1 | DPDT | custom_footprints:GF-126-0159 | SW1 |
| 1 | FTDI_Connector | custom_footprints:Header_0.1in_1x6 | J1 |
| 1 | Hoboshop | custom_footprints:Hoboshop | G*** |
| 1 | JLink_SWD_20pin | custom_footprints:Header_Shrouded_0.1in_2x10 | J5 |
| 1 | LM1117-ADJ | custom_footprints:SOT_223_3 | U1 |
| 1 | LOGO | custom_footprints:Signature_Mask | G*** |
| 1 | MKL16Z64VLH4 | custom_footprints:QFP_64 | U2 |
| 1 | Red | custom_footprints:D_0805 | D1 |
| 1 | USB_Micro_B | custom_footprints:10118193-0001LF_noslots | J3 |
The 80 most common of 82 parts.
Questions
How big is the Kinetis PCB?
It measures 88.9 × 88.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kinetis use?
82 parts, built around the MKL16Z64VLH4 and LM1117-ADJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kinetis KiCad files?
From the nrclark/kinetis-eval repository on GitHub, at the commit this page was made from: the board is kicad/kinetis.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kinetis design in my own project?
Its repository states no licence, so its author keeps all rights: ask nrclark before reusing the design.
Similar boards
- 2 layers240 × 194 mm
Infinitas
freeDSP/freeDSP-INFINITAS
USB Audio Class 2 compliant audio interface with up to 32 input and up to 32 output channels and optional ADAU1452 DSP.
1,020 parts35 - 2 layers134.6 × 106.4 mm
Renovation ssi 2001
roybaer/renovation_ssi_2001
Innovation SSI-2001 replica that can be built without vintage components
95 parts26 - 2 layers53 × 42.5 mm
- 2 layers144.8 × 101.6 mm
Stebus
laurent-fr/z180
This is my attempt to create a 80's style computer based on the Zilog Z180 CPU
89 parts5 - 2 layers99.9 × 99.8 mm
GR BreadBoardBuddy
GadgetReboot/Breadboard_Buddy
PCB with power supplies, audio amp, LEDs, pots and level shifters to make breadboarding easier.
161 parts3 - 2 layers100.1 × 100.1 mm
AMP PCBv2
Autonomous-Motorsports-Purdue/AMP_PCBv2
Files relating to version 2 of the PCB for AMP kart
116 parts1 - 2 layers70 × 66 mm
