

Power board
Repository for the Optical 1:1 reader aka the OP1:1
- Size
- 53 × 42.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 11
- Pads
- 68
- Tracks, vias
- 116, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Oct 2019
- Updated
- 11 Jan 2020
Overview
Power board is an open-source printed circuit board by nbacon0, from the nbacon0/OP1-1 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 53 × 42.5 mm with 28 parts on 11 nets, routed with 116 tracks and 0 vias.
It is built around the LM1117-ADJ and LM2776DBV. Its parts include 9 capacitors, 6 resistors, 5 connectors and 4 ICs.
Main components
2LM1117-ADJ
SOT-2231 1.2V~5V 1.3V@(1000mA) 15V 1A 2mA Adjustable Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedLM2776DBV
SOT-23-6-40℃~+85℃ -5.5V~-2.7V 2.5Ω 2.7V~5.5V 200mA 200uA 2MHz 90% Inverted Support SOT-23-6 Charge Pumps ROHSTexas InstrumentsCharge Pumps
README
README.mdThe OP1:1 project is our effort to address an urgent need in the digital preservation community, namely that optical media (CDs, DVDS, etc.) are almost 40 years old, and are failing at an alarming rate: they're delaminating, suffering from disc rot and a slew of other issues.
Our proposed solution is a (completely open source) device to directly sample the laser as its reading the disc and storing this (very large) raw dump for safe-keeping and process later. The benefit of this approach is that it can be agnostic to the encoding of the discs. The same device that can preserve audio discs could be used to preserve video discs, photo discs, and other proprietary formats.
Current Status
This project is currently months away from an initial release: parts have been ordered by the small group of volunteers and current resources regarding control of the OPU are being slowly assembled from parties that have engaged in research not directly addressing our need, but are still directly applicable to the goals outlined above.
Disclaimer
None of the below projects or resources are associated with the OP1:1 Project unless direclty noted.
Resources
Links to Projects that Contain Applicable Research and Resources
Project #1: Describes & provides a circuit to communicate with three diff. Blu-Ray OPUs
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6066758/
https://pubs.acs.org/doi/suppl/10.1021/acssensors.8b00340/suppl_file/se8b00340_si_001.pdf
Project #2: Reverse engineering the Xbox 360 OPU
http://www.diyouware.com/node/161
https://www.digchip.com/datasheets/parts/datasheet/287/MLX75012.php (photodiode datasheet)
Project #3: Controlling blu-ray diode to etch material
https://wiki.das-labor.org/w/LaserExposer
https://github.com/das-labor/laser-exposer
Project #4 Bypassing DVD Drive Circuits to Read Raw Data
https://debugmo.de/2007/07/read-your-dvds-the-raw-way/
Files, Programs & Tools
Project 1: Tools & Tool websites used / referenced in OPU Biosensing Paper
https://www.cdspeed2000.com/download.html - Opti Drive Control
http://qpxtool.sourceforge.net/download.html - QPxTools
http://www.k-probe.com/download-kprobe-k-probe.php - K-Probe
Project #4 Tools Developed (software library to deal with raw DVD (NRZI) bitstreams.)
https://github.com/tmbinc/libdvd
Technical Resources
Playstation 3 & 4 Blu-Ray Drive Technical Notes
https://www.psdevwiki.com/ps4/Bluray_Drive
https://www.psdevwiki.com/ps3/Bluray_Drive
Parts List
Development Gear
Preferred Dev Kit
$57.79 - https://tinyurl.com/y2vp9gc6 - Board (for additional I/O)
$30.79 - https://tinyurl.com/y5bf4q26 - MCU (WaveShare STM32 Core Board + STM32F7 (8MB of RAM)
Breakout Boards
$7.19 - https://tinyurl.com/y5zseyle - Pack of 5 - FPC/FFC Flat Flexible Cable Adapter Board Connectors
$5.69 - https://tinyurl.com/y3howaey - Pack of 5 - FPC/FFC Flat Flexible Cable Adapter Board Connectors
Drives
PS3 Drive + OPU
$25.89 - https://tinyurl.com/yxz4hrx3 - PS3 Drive (KEM-410CCA) International Shipping - Drive Option #1
$26.63 - https://tinyurl.com/y2wpv3ua - PS3 Drive (KEM-410CCA) International Shipping - Drive Option #2
$15.90 - https://tinyurl.com/y3cqtx5q - OPU + Sled (KEM-410CCA) International Shipping
$13.50 - https://tinyurl.com/y3bo29z2 - OPU Only (KEM-410CCA) International Shipping
Xbox 360 Drive & OPU
$15.50 - $50 (eBay France) - https://tinyurl.com/y4n3xux9 - Xbox 360 HD DVD Drive (international shipping)
$5.69 - https://tinyurl.com/y4dnyeug - OPU + Sled (PHR-803T) International Shipping
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10µF | Capacitor_SMD:C_1206_3216Metric | C1, C2, C3, C4, C5, C6 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4 |
| 3 | LM1117-ADJ | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1, U2, U3 |
| 2 | 2.2µF | Capacitor_SMD:C_0603_1608Metric | C7, C9 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4, J5 |
| 2 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2, J3 |
| 1 | 110 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 150 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 180 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 1µF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 360 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 820 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | LM2776 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J1 |
Questions
How big is the Power board PCB?
It measures 53 × 42.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Power board use?
28 parts, built around the LM1117-ADJ and LM2776DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power board KiCad files?
From the nbacon0/OP1-1 repository on GitHub, at the commit this page was made from: the board is hardware/power_board/power_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 80 mm

- 2 layers240 × 194 mm

Infinitas
freeDSP/freeDSP-INFINITAS
USB Audio Class 2 compliant audio interface with up to 32 input and up to 32 output channels and optional ADAU1452 DSP.
1,020 parts35 - 2 layers134.6 × 106.4 mm

Renovation ssi 2001
roybaer/renovation_ssi_2001
Innovation SSI-2001 replica that can be built without vintage components
95 parts26 - 2 layers144.8 × 101.6 mm

Stebus
laurent-fr/z180
This is my attempt to create a 80's style computer based on the Zilog Z180 CPU
89 parts5 - 2 layers99.9 × 99.8 mm

GR BreadBoardBuddy
GadgetReboot/Breadboard_Buddy
PCB with power supplies, audio amp, LEDs, pots and level shifters to make breadboarding easier.
161 parts3 - 2 layers100.1 × 100.1 mm

AMP PCBv2
Autonomous-Motorsports-Purdue/AMP_PCBv2
Files relating to version 2 of the PCB for AMP kart
116 parts1 - 2 layers70 × 66 mm

- 2 layers69.2 × 48.3 mm
