

Ioboard
sitina1
- Size
- 71.6 × 73.2 mm
- Copper layers
- 4
- Thickness
- 1 mm
- Parts
- 212
- Nets
- 146
- Pads
- 673
- Tracks, vias
- 2,082, 335
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 10 Oct 2024
- Updated
- 10 Oct 2024
Overview
Ioboard is an open-source printed circuit board by novvoo, from the novvoo/sitina1 repository on GitHub, published under the MIT licence. It is a 4-layer board of 71.6 × 73.2 mm with 212 parts on 146 nets, routed with 2,082 tracks and 335 vias.
It is built around the SY8113ADC, LGS6302B5 and LGS63032B6, with the TPS54302, LGS5522 and MT9700 among its other parts. Its parts include 83 capacitors, 59 resistors, 21 ICs, 17 connectors and 13 inductors. It belongs with the STM32 boards of this library.
Main components
12SY8113ADC
TSOT-23-6-40℃~+85℃@(TA) 1 100uA 3A 4.5V~18V 500kHz Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHS矽力杰silergyDC-DC ConvertersLGS6302B5
SOT-23-5-40℃~+125℃@(TJ) 1 1.2MHz 180uA 2A 3V~60V 3V~60V Adjustable Boost Boost Built-in Light load efficient mode、Cycle-by-cycle current limiting、Adjustable current limiting No SOT-23-5 DC-DC Converters ROHSLegend-SiDC-DC ConvertersLGS63032B6
SOT-23-6-40℃~+125℃ 1 1.2MHz 2A 3% 3V~60V 3V~60V Boost Built-in DC-DC PWM Under Voltage Protection、Over Voltage Protection、Over-Temperature Protection (OTP) SOT-23-6 LED Drivers ROHSLegend-SiLED DriversTPS54302
UncategorisedTexas InstrumentsLGS5522
ESSOP-10-40℃~+125℃ 2 26uA 2A 3V~6.5V 8.4V Charging IC Support Support ESSOP-10 Battery Management ROHSLegend-SiBattery ManagementMT9700
SOT-23-5-40℃~+85℃ 1 2.4V~5.5V 2A 80mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Overcurrent Protection(OCP)、Over Temperature Protection SOT-23-5 Power Distribution Switches ROHS西安航天民芯Power Distribution SwitchesUSBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)WPN3012H4R7MT
SMD,3x3mm1.3A 235mΩ 2A 4.7uH ±20% SMD,3x3mm Power Inductors ROHSSunlordPower Inductors1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky DiodesWPN4020H100MT
SMD,4x4mm10uH 216mΩ 2A 3.5A ±20% SMD,4x4mm Power Inductors ROHSSunlordPower InductorsBAT54AW
SOT-323(SC-70)1 Pair Common Anode 1V@100mA 200mA 2uA@25V 30V SOT-323(SC-70) Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
hardware/auxiliary/Resonant_V_validation/README.mdResonant-Mode V Driver Validation Board
References:
- Michael A. Wyatt, Reactive CCD drive saves power, EDN Magazine, Jan 19, 1999. EEVBlog Forum
Parts
212| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C11, C17, C18, C23, C30, C47, C52, C56, C62, C68, C72, C75, C80, C83, C84 +1 |
| 16 | 10uF/10V | Capacitor_SMD:C_0603_1608Metric | C8, C9, C13, C14, C21, C22, C24, C37, C41, C45, C49, C50, C54, C82, C90, C102 |
| 15 | 4.7uF/50V | Capacitor_SMD:C_0805_2012Metric | C27, C28, C29, C35, C36, C39, C40, C43, C44, C55, C58, C59, C61, C64, C67 |
| 10 | 18pF | Capacitor_SMD:C_0402_1005Metric | C26, C31, C38, C42, C48, C53, C57, C63, C65, C66 |
| 10 | 22uF/25V | Capacitor_SMD:C_1206_3216Metric | C2, C32, C34, C60, C69, C70, C71, C94, C95, C96 |
| 10 | LensMount | footprints:YZP0652-15072-01 | J12, J13, J14, J15, J16, J17, J18, J19, J20, J21 |
| 10 | WPN3012H4R7MT | Inductor_SMD:L_Changjiang_FNR3012S | L1, L3, L4, L5, L7, L8, L9, L10, L11, L12 |
| 8 | 1K | Resistor_SMD:R_0402_1005Metric | R1, R2, R5, R28, R33, R37, R42, R49 |
| 7 | 10K | Resistor_SMD:R_0402_1005Metric | R3, R11, R18, R21, R23, R31, R32 |
| 6 | 100K/1% | Resistor_SMD:R_0402_1005Metric | R6, R24, R55, R62, R63, R64 |
| 6 | 10uF/25V | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C6, C7, C89 |
| 5 | 620K/1% | Resistor_SMD:R_0402_1005Metric | R7, R12, R13, R15, R26 |
| 5 | SY8113 | Package_TO_SOT_SMD:TSOT-23-6 | U9, U13, U14, U17, U18 |
| 4 | 1N5819WS | Diode_SMD:D_SOD-323 | D1, D4, D5, D6 |
| 4 | 220K/1% | Resistor_SMD:R_0402_1005Metric | R10, R34, R36, R43 |
| 4 | 5.1K/1% | Resistor_SMD:R_0402_1005Metric | R19, R20, R56, R57 |
| 3 | 110K/1% | Resistor_SMD:R_0402_1005Metric | R29, R46, R50 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C10, C12, C46 |
| 3 | 200K/1% | Resistor_SMD:R_0402_1005Metric | R58, R59, R60 |
| 3 | 22uF/6.3V | Capacitor_SMD:C_0603_1608Metric | C15, C33, C79 |
| 3 | 2K | Resistor_SMD:R_0402_1005Metric | R39, R40, R41 |
| 3 | 36K/1% | Resistor_SMD:R_0402_1005Metric | R4, R16, R52 |
| 3 | 47pF | Capacitor_SMD:C_0402_1005Metric | C19, C20, C73 |
| 3 | AP22850SH8-7 | Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U10, U16, U19 |
| 3 | Fiducial | Fiducial:Fiducial_0.75mm_Mask1.5mm | FID1, FID2, FID3 |
| 3 | LGS6302B5 | Package_TO_SOT_SMD:SOT-23-5 | U2, U8, U12 |
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965 | H1, H2, H3 |
| 3 | TPS54302 | Package_TO_SOT_SMD:SOT-23-6 | U3, U20, U22 |
| 3 | WPN4020H100MT | Inductor_SMD:L_Changjiang_FNR4020S | L6, L13, L14 |
| 2 | 0.5mm Bottom Contact | Connector_FFC-FPC:Hirose_FH12-30S-0.5SH_1x30-1MP_P0.50mm_Horizontal | J2, J5 |
| 2 | 150K/1% | Resistor_SMD:R_0402_1005Metric | R45, R48 |
| 2 | 240K/1% | Resistor_SMD:R_0402_1005Metric | R22, R44 |
| 2 | 30K/1% | Resistor_SMD:R_0402_1005Metric | R27, R38 |
| 2 | 49.9K/1% | Resistor_SMD:R_0402_1005Metric | R9, R14 |
| 2 | 510K/1% | Resistor_SMD:R_0402_1005Metric | R30, R51 |
| 2 | BAT54AW | Package_TO_SOT_SMD:SOT-323_SC-70 | D11, D13 |
| 1 | 0.5mm Bottom Contact | Connector_FFC-FPC:Hirose_FH12-12S-0.5SH_1x12-1MP_P0.50mm_Horizontal | J7 |
| 1 | 200R | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 32.768K | Crystal:Crystal_SMD_TXC_9HT11-2Pin_2.0x1.2mm_HandSoldering | Y2 |
| 1 | 4.99R | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | 680K/1% | Resistor_SMD:R_0402_1005Metric | R47 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | AP2205-W5-7 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | AudioJack2 | footprints:Jack_2.5mm_PJ_210A | J8 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_Murata_PKMCS0909E | BZ1 |
| 1 | C725874 | footprints:TM-007-D1-X | SW1 |
| 1 | Conn_02x06_Odd_Even | Connector_PinSocket_1.27mm:PinSocket_2x06_P1.27mm_Horizontal | J9 |
| 1 | FODM3023 | footprints:MFP4_3.85x4.4 | U5 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D12 |
| 1 | LGS5522 | Package_SO:SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm | U1 |
| 1 | LGS63032B6 | Package_TO_SOT_SMD:SOT-23-6 | U15 |
| 1 | MICRO_SD(TFC-WPAPR-08) | footprints:TFC-WPAPR-08 | MICRO_SD1 |
| 1 | MT9700 | Package_TO_SOT_SMD:SOT-23-5 | U11 |
| 1 | S8050 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | STM32G030K6Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U4 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U7 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 1 | ~ | footprints:Hirose_FH12-20S-0.5SH_1x20-1MP_P0.50mm_Horizontal_Reversed | J1 |
More from novvoo/sitina1
1- 4 layers52.1 × 40.6 mm

Similar boards
- 4 layers90 × 80 mm

Glider
pdyxs/glider
Fork of zephray/glider (Modos Glider e-ink monitor) with a DP AUX polarity fix and a standalone GCC firmware build
379 partsCERN-OHL-S-2.0 - 4 layers71.6 × 73.2 mm

Ioboard
CameraNexus/sitina1
Open-source 35mm full-frame (36mm x 24mm) CCD mirror-less interchangable lens camera (MILC). The original goal of this project was to create a digital camera back to convert SLR cameras to DSLR cameras, but has since…
222 parts82MIT - 2 layers15 × 65 mm

GB DMG PSU
rallekralle11/DMG_PSU
Affordable replacement power board for the DMG gameboy which can provide -18v for the original display
32 parts4CERN-OHL-P-2.0 - 2 layers46.5 × 32 mm

Half bridge load cells board
XuanTrace/half-bridge-load-cells-board
Open-source half-bridge load cell PCB design featuring the HX710A/B/C ADC chip. Supports SMD with castellation (half-hole), pin headers, and XH2.45 4-pin connectors.
46 parts1 - 2 layers

OpenPowerDistribution
ulikoehler/OpenPowerDistributor
Open-hardware PCB to distribute DC 12V power to 12V / 5V / 9V & 24V consumers
537 partsCC0-1.0 - 2 layers100 × 60 mm

- 4 layers114.9 × 129.9 mm

Tanmatsu
Nicolai-Electronics/tanmatsu-hardware
Hardware design of the Tanmatsu mainboard
372 parts9CERN-OHL-P-2.0 - 2 layers37 × 70.9 mm

Opendiag
maximus64/opendiag-hardware
OpenDIAG - Open Source OBD2 Interface (Hardware)
148 parts5CERN-OHL-S-2.0
Questions
How big is the Ioboard PCB?
It measures 71.6 × 73.2 mm and has 4 copper layers, 1 mm thick.
What parts does the Ioboard use?
212 parts, built around the SY8113ADC, LGS6302B5, LGS63032B6 and TPS54302. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ioboard KiCad files?
From the novvoo/sitina1 repository on GitHub, at the commit this page was made from: the board is hardware/ioboard/pcb.kicad_pcb and its schematic hardware/auxiliary/Resonant_V_validation/ccd_driver_v_adiabatic_simplified.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ioboard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).