Nova38/raven_wingA Custom Keyboard
Raven Keyboard is an open-source printed circuit board by Nova38, from the Nova38/raven_wing repository on GitHub, published under the MIT licence. It is a 2-layer board with 91 parts on 109 nets, routed with 214 tracks and 0 vias.
It is built around the MCP73831 and 1N4148W. Its parts include 8 capacitors, 7 resistors, 5 connectors, 3 diodes and 2 ICs. It belongs with the keyboards and input boards of this library.
A Custom Keyboard
| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | Switch_Keyboard_Kailh:SW_Kailh_Choc_V1_1.00u | SW_C1-R1, SW_C1-R2, SW_C1-R3, SW_C1-R4, SW_C1-R5, SW_C2-R1, SW_C2-R2, SW_C2-R3, SW_C2-R4, SW_C2-R5, SW_C3-R1, SW_C3-R2, SW_C3-R3, SW_C3-R4, SW_C3-R5, SW_C4-R1 +14 | |
| 30 | 1N4148W | Diode_SMD:D_SOD-123 | D_C1-R1, D_C1-R2, D_C1-R3, D_C1-R4, D_C1-R5, D_C2-R1, D_C2-R2, D_C2-R3, D_C2-R4, D_C2-R5, D_C3-R1, D_C3-R2, D_C3-R3, D_C3-R4, D_C3-R5, D_C4-R1 +14 |
| 2 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C6 |
| 2 | 0.22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7, C13 |
| 2 | 4.7uF | MicroMod-Datalogging-CarrierBoard:0603 | C3, C4 |
| 2 | 5.1k | MicroMod-Datalogging-CarrierBoard:0603 | R2, R3 |
| 1 | 1.0uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 10k | MicroMod-Datalogging-CarrierBoard:0603 | R9 |
| 1 | 10uF | MicroMod-Datalogging-CarrierBoard:EIA3216 | C2 |
| 1 | 1k | MicroMod-Datalogging-CarrierBoard:0603 | R7 |
| 1 | 2.2k | MicroMod-Datalogging-CarrierBoard:0603 | R6 |
| 1 | 20k | MicroMod-Datalogging-CarrierBoard:0603 | R10 |
| 1 | 3.3V | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | 3.3V Out | MicroMod-Datalogging-CarrierBoard:COMBO-JUMPER_2_NC_TRACE | 3.3V_Out1 |
| 1 | 3A/10V/280mV | MicroMod-Datalogging-CarrierBoard:SOD-323 | D3 |
| 1 | 6V/2A | MicroMod-Datalogging-CarrierBoard:1210 | F2 |
| 1 | AP7361C-33SP-13 | SamacSys_Parts:SOIC127P600X163-9N | IC1 |
| 1 | BOOT | MicroMod-Datalogging-CarrierBoard:TACTILE_SWITCH_SMD_5.2MM | S2 |
| 1 | CONN_021X02 | MicroMod-Datalogging-CarrierBoard:1X02_NO_SILK | J7 |
| 1 | JST_2MM_MALE | MicroMod-Datalogging-CarrierBoard:JST-2-SMD | J4 |
| 1 | JTAG | MicroMod-Datalogging-CarrierBoard:2X5-PTH-1.27MM | J2 |
| 1 | M2-Stand-Off | MicroMod-Datalogging-CarrierBoard:STAND-OFF-REFLOW-M2.5 | H5 |
| 1 | MCP73831 | MicroMod-Datalogging-CarrierBoard:SOT23-5 | U2 |
| 1 | MicoMod-Connector | MicroMod-Datalogging-CarrierBoard:M.2-CONNECTOR-E | MicroMod_Connector1 |
| 1 | Reset | MicroMod-Datalogging-CarrierBoard:TACTILE_SWITCH_SMD_5.2MM | S1 |
| 1 | SPI | MicroMod-Datalogging-CarrierBoard:1X06_NO_SILK | J12 |
| 1 | USB_C_2-LAYER_PADS | MicroMod-Datalogging-CarrierBoard:USB-C-16P-2LAYER-PADS | J1 |
| 1 | Yellow | MicroMod-Datalogging-CarrierBoard:LED-0603 | D2 |
91 parts, built around the MCP73831 and 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Nova38/raven_wing repository on GitHub, at the commit this page was made from: the board is V1/kicad/Raven_Keyboard.kicad_pcb and its schematic V1/kicad/KeyMatrix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Broccoliux/Broccoli-board
A fully custom 100% mechanical keyboard with a custom black PCB, hot-swap clicky switches, and full RGB where every internal component is hand soldered and nothing is by assemble.
AndreaGiulianini/lira
57-key 40% + numpad keyboard: Bluetooth/USB-C, hot-swap MX, RMK/Vial, and a built-in USB sound card (3.5 mm headset jack). Generated from source with KiCad.
mburger89/SMK_macro_pad
4x4 wireless macro pad — RP2040 + Raspberry Pi RM2. KiCad project generated from Python; includes a 42%-smaller 'mini' variant with back-mounted electronics.
Jeija/esp8266-smartwatch
ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...
azerimaker/Penguino-STM32WL-LoRa-E5
This repo contains all the necessary design and fabrication files for the Seeed Studio LoRa-E5 based Penguino Feather breakout board.
Mposiblee/Zireael
The keyboard is based on Dao Chok BLE. The locations of components on the board have been changed, space for the battery has been added, and the thumb cluster has also been changed.
