
DIY Mic
TrojanPinata/DIY-Mic
A DIY microphone built using the design of DIY Perks and modified by me

Microphone is an open-source printed circuit board by not-sample-text, from the not-sample-text/diy-usb-c-mic repository on GitHub. It is a 2-layer board of 86.5 × 63.3 mm with 25 parts on 15 nets, routed with 153 tracks and 6 vias.
It is built around the NMA0515SC. Its parts include 8 resistors, 7 capacitors and 1 IC. It belongs with the audio and music boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 2200pF | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C2, C3, C4, C5 |
| 4 | 2k2 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R4, R6, R8 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 22pF | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C1, C6, C7 |
| 2 | 100 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R7 |
| 2 | 3k9 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R5 |
| 1 | AUDIO | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | AUDIO1 |
| 1 | GAIN | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | GAIN1 |
| 1 | MIC | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | MIC1 |
| 1 | NMA0515SC | Converter_DCDC:Converter_DCDC_Murata_NMAxxxxSC_THT | U1 |
| 1 | TDA1522 | Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads | TDA1 |
| 1 | USB 5V | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | USB1 |

TrojanPinata/DIY-Mic
A DIY microphone built using the design of DIY Perks and modified by me

atomlaser-lab/iq-bias-control
Digital bias controller for IQ single-sideband modulation using a Red Pitaya STEMlab board

lmarzen/diy-microphone
This project contributes a KiCad PCB design that implements the circuit described in the DIY Perks Microphone Project v1, https://www.youtube.com/watch?v=LoQu3XXIayc.

Gadu1in/audio-interface-pcm2906
An audio interface designed for low impedance earbuds and an external 3.5mm microphone input

not-sample-text/hi-fi-mic
A custom PCB for the high-fidelity microphone project by DIY Perks, redesigned from the original stripboard version for a cleaner and more reliable build.


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
It measures 86.5 × 63.3 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the NMA0515SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the not-sample-text/diy-usb-c-mic repository on GitHub, at the commit this page was made from: the board is microphone.kicad_pcb and its schematic microphone.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask not-sample-text before reusing the design.