Skip to the content
2 layers30 × 30 mmNypx06, the printed circuit board in 3D
Size
30 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
16
Pads
55
Tracks, vias
113, 33
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
8 Sep 2021
Updated
8 Sep 2021

Overview

Nypx06 is an open-source printed circuit board by noodlefighter, from the noodlefighter/nypx06-pcb repository on GitHub. It is a 2-layer board of 30 × 30 mm with 21 parts on 16 nets, routed with 113 tracks and 33 vias.

It is built around the MS80F0601 and LTV-827S. Its parts include 5 capacitors, 4 connectors, 3 resistors, 3 diodes and 2 ICs.

Main components

2

Parts

21
QtyValueFootprintReferences
2100uFCapacitor_SMD:CP_Elec_5x5.4C3, C4
210KResistor_SMD:R_0603_1608MetricR2, R3
222uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
10.1uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC5
10RResistor_SMD:R_0603_1608MetricR1
1CTRLTestPoint:TestPoint_Pad_D1.5mmTP3
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_HorizontalJ1
1D_SmallDiode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolderD1
1Jumper_NC_SmallJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1
1LED_CTRLLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD3
1LED_POWERLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD2
1LTV-827SPackage_DIP:SMDIP-8_W9.53mmU2
1MS80F0601Package_TO_SOT_SMD:SOT-23-6U1
1PWR1Connector_Wire:SolderWirePad_1x01_SMD_1x2mmJ2
1PWR2Connector_Wire:SolderWirePad_1x01_SMD_1x2mmJ3
1PWRDNTestPoint:TestPoint_Pad_D1.5mmTP1
1USB_AConnector_USB:USB_A_CNCTech_1001-011-01101_HorizontalJ4
1VDDTestPoint:TestPoint_Pad_D1.5mmTP2

Similar boards

  • 2 layers50.3 × 50 mmKa keyer mainpcb, the printed circuit board in 3D

    Ka keyer mainpcb

    ea4eoz/ka-keyer

    A simple keyer for the high speed CW operators

    41 parts6GPL-3.0
  • 2 layers100.3 × 71.1 mmPyblockplc topseite, the printed circuit board in 3D

    Pyblockplc topseite

    pyplc/pyblockplc

    python plc automation fbd- programming with esp32

    73 parts2
  • 2 layers114.3 × 63.5 mmRstctlr, the printed circuit board in 3D

    Rstctlr

    dancrossnyc/rstpwr

    This is, fundamentally, a set of serial-controlled solid-state switches. I used them to control the power and reset functions of development machines with ATX motherboards.

    95 parts1MIT
  • 2 layers70 × 55 mmOpen lightning trigger, the printed circuit board in 3D

    Open lightning trigger

    conifarad/open-lightning-trigger

    A low-cost optical camera trigger for lightning and other phenomena

    50 partsCERN-OHL-P-2.0
  • 2 layers150 × 80 mmK3S Seq IF Sw, the printed circuit board in 3D

    K3S Seq IF Sw

    M0WGF/K3s-IF-switch-and-Sequencer

    Two port IF switch and three event sequencer for use with the Elecraft K3 and K3s transceivers.

    102 parts
  • 4 layers73.5 × 293.4 mmNNA PMS NXP PCB, the printed circuit board in 3D

    NNA PMS NXP PCB

    pmamatis/NAA-Measurment-Carrier-System

    266 partsMIT
  • 2 layers40 × 90 mmSdm27ev bspd v2, the printed circuit board in 3D

    Sdm27ev bspd v2

    sundevilmotorsports/ev-pcb-dev

    PCB development repository SDM EV

    66 parts3

Questions

How big is the Nypx06 PCB?

It measures 30 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Nypx06 use?

21 parts, built around the MS80F0601 and LTV-827S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Nypx06 KiCad files?

From the noodlefighter/nypx06-pcb repository on GitHub, at the commit this page was made from: the board is src/nypx06.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Nypx06 design in my own project?

Its repository states no licence, so its author keeps all rights: ask noodlefighter before reusing the design.