
Rst pwr
dancrossnyc/rstpwr
This is, fundamentally, a set of serial-controlled solid-state switches. I used them to control the power and reset functions of development machines with ATX motherboards.

This is, fundamentally, a set of serial-controlled solid-state switches. I used them to control the power and reset functions of development machines with ATX motherboards.
Rstctlr is an open-source printed circuit board by dancrossnyc, from the dancrossnyc/rstpwr repository on GitHub, published under the MIT licence. It is a 2-layer board of 114.3 × 63.5 mm with 95 parts on 113 nets, routed with 488 tracks and 13 vias.
It is built around the FT232RL, TLC59281DBQ and LTV-827S, with the MIC2025-1YM among its other parts. Its parts include 53 diodes, 12 ICs, 12 connectors, 9 resistors and 8 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
This is, fundamentally, a set of serial-controlled solid-state switches. I used them to control the power and reset functions of development machines with ATX motherboards.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | ~ | Diode_SMD:D_0805_2012Metric | D1, D2, D3, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34 +3 |
| 16 | ~ | Diode_SMD:D_SOD-323_HandSoldering | D38, D39, D40, D41, D42, D43, D44, D45, D46, D47, D48, D49, D50, D51, D52, D53 |
| 9 | GRN | LED_SMD:LED_0805_2012Metric | D5, D7, D9, D11, D13, D15, D17, D19, D21 |
| 9 | RED | LED_SMD:LED_0805_2012Metric | D4, D6, D8, D10, D12, D14, D16, D18, D20 |
| 8 | LTV-827S | Package_DIP:SMDIP-8_W9.53mm | U5, U6, U7, U8, U9, U10, U11, U12 |
| 8 | ~ | Connector_Molex:Molex_SPOX_5267-04A_1x04_P2.50mm_Vertical | J4, J5, J6, J7, J8, J9, J10, J11 |
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric | C4, C5, C6, C7, C8 |
| 4 | 10kΩ | Resistor_SMD:R_0805_2012Metric | R3, R6, R7, R8 |
| 2 | 1kΩ | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, JP1 |
| 1 | 0Ω | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 4.7kΩ | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 4.99kΩ | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | ATtiny2313A-20SU | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U3 |
| 1 | FB | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | MIC2025-1YM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | NOPOP | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | TLC59281 | Package_SO:SSOP-24_3.9x8.7mm_P0.635mm | U4 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J1 |

dancrossnyc/rstpwr
This is, fundamentally, a set of serial-controlled solid-state switches. I used them to control the power and reset functions of development machines with ATX motherboards.

chipiki/baikal_be-t1000
OpenHardware development board for Russian Baikal BE-T1000 MIPS Warrior P-class P5600 processor






conifarad/open-lightning-trigger
A low-cost optical camera trigger for lightning and other phenomena

It measures 114.3 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
95 parts, built around the FT232RL, TLC59281DBQ, LTV-827S and MIC2025-1YM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dancrossnyc/rstpwr repository on GitHub, at the commit this page was made from: the board is ctlr/rstctlr.kicad_pcb and its schematic board/rst-pwr.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).