Skip to the content
2 layers79 × 38.6 mmMeasure Battery Level, the printed circuit board in 3D

design of a HD-SEMG system, using ads1298, Arduino DUE, ST32F4, INA333 adn AD8232

Size
79 × 38.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
66
Nets
56
Pads
213
Tracks, vias
419, 16
Pours
5
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
11 May 2020
Updated
20 Apr 2020

Overview

Measure Battery Level is an open-source printed circuit board by node9909, from the node9909/Graduation-project-files repository on GitHub. It is a 2-layer board of 79 × 38.6 mm with 66 parts on 56 nets, routed with 419 tracks and 16 vias.

It is built around the ATTINY85-20PU, ECH8693R-TL-W and MCP73831, with the TPS61090_1_2 among its other parts. Its parts include 20 resistors, 15 connectors, 10 capacitors, 7 ICs and 4 diodes. It belongs with the power boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

4

README

README.md

Graduation internship report attachments (HD-SEMG system ADS1298)

THis folder includes: Hardware files, software files, python application, MATLAB and report, design was to build a protable and wireless HD-SEMG aquisition system for my graduation internship of my electrical engineering degree at Hogeschool Rotterdam, the internship took place at Bio-engineering.pl in Wroclaw.

The hypothesis of the project was ”Can the AMAC performance level be improved in direct controlled (DC) myoelectric systems by exactly locating the location where the patient has the most amount of cover the agonist and antagonist of the residual limb during different hand gestures’’. The goal was to develop a device that can be used to confirm this hypothesis, the could be achieved by measuring the muscle potentials over the residual limb during different hand gestures (HD-SEMG recording)

In the project multiple AFE were designed were presented (based on AD8232 adn INA333), the function of the AFE to amplify and filter the EMG signal. THe EMG channels were digitezed using the ADS1298. the ADC data is read from the ADS1298 via an Arduino DUE (SAM3X8E)/ STM32F4.A PC application was developed to visualize the data and verifiy certain system specification (CMRR, IRN and Gain). The Current design is capable of measuring up to 1kSps with the Arduino DUE and to >4kSps with the STM32F411, the problem with the STM32F4 is the the Python application and realterm cannot open the USB port (CDC) to read the data, but it can be open in Tera term. If anybody knows why I would be happy to know :)

If you would like to continue this project Idea, feel to contact me for more info about the future improvements or any other questions about the design of the project.

Contact details

If you have any questions about the project feel free to contract me at: okersten@gmail.com

Parts

66
QtyValueFootprintReferences
41KResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR3, R5, R12, R17
310uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC2, C3, C4
3Conn_01x01Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_VerticalJ15, J16, J17
3POWER_OUTConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ7, J10, J12
3RResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR9, R20, R21
3TestPointTestPoint:TestPoint_Pad_D2.0mmTP1, TP2, TP3
2150RResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR6, R7
21uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC8, C9
24.7KResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR18, R19
2CONN_02JST-PTH-2Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ2, J14
2JumperJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP2, JP3
10.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC5
11.8MRResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR10
11.8MohmResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR15
11000RResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR2
1100UF(tan)Capacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-T_Pad1.50x2.35mm_HandSolderC11
1100nFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1
110KResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR14
12.2uFCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC10
12MOhmResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR13
1330kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR11
1500RResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1
15VTestPoint:TestPoint_Pad_2.5x2.5mmJ6
16.8uHInductor_SMD:L_Bourns_SRN6045TAL1
1AP9101CPackage_TO_SOT_SMD:SOT-23-6U6
1ATtiny85-20PUPackage_DIP:DIP-8_W7.62mmU5
1CCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC6
1Charge CurrentResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR8
1Conn_01x03Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ9
1Conn_02x03_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_VerticalJ13
1Conn_02x04_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_VerticalJ11
1Debug headerConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ5
1ECH8693RPackage_TO_SOT_SMD:TSOT-23-8U7
1GNDTestPoint:TestPoint_Pad_2.5x2.5mmJ8
1Jumper_3_OpenJumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD4
1LED_ATLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD3
1MCP1703A-3302_SOT23Package_TO_SOT_SMD:SOT-23U4
1MCP73831Package_TO_SOT_SMD:SOT-23-5U2
1R_POT_TRIMPotentiometer_SMD:Potentiometer_Bourns_3314J_VerticalRV1
1RsnsResistor_SMD:R_2512_6332Metric_Pad1.52x3.35mm_HandSolderR4
1Switch_SW_SPDTConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalSW1
1TPS61090Package_DFN_QFN:QFN-16-1EP_4x4mm_P0.65mm_EP2.5x2.5mmU3
1USB4065-XX-X_REVAUSB4065-XX-X_REVA:GCT_USB4065-XX-X_REVAJ1
1bat chargingLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1
1battery fullLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD2
1ds2745_oliverPackage_SO:TSSOP-8_3x3mm_P0.65mmU1

The 65 most common of 66 parts.

More from node9909/Graduation-project-files

3
  • 2 layers189 × 117 mmADS1298 FINAL, the printed circuit board in 3D

    ADS1298 FINAL

    node9909/Graduation-project-files

    design of a HD-SEMG system, using ads1298, Arduino DUE, ST32F4, INA333 adn AD8232

    295 parts10
  • 4 layers99.2 × 99.7 mmADS FINAL V1, the printed circuit board in 3D

    ADS FINAL V1

    node9909/Graduation-project-files

    design of a HD-SEMG system, using ads1298, Arduino DUE, ST32F4, INA333 adn AD8232

    247 parts10
  • 2 layers150 × 86.9 mmHDSEMG, the printed circuit board in 3D

    HDSEMG

    node9909/Graduation-project-files

    design of a HD-SEMG system, using ads1298, Arduino DUE, ST32F4, INA333 adn AD8232

    210 parts10

Similar boards

  • 6 layers38.1 × 38.1 mmSmartWatch, the printed circuit board in 3D

    SmartWatch

    evgenu/EyeWatch

    78 parts
  • 4 layers74 × 104 mmBeepy, the printed circuit board in 3D

    Beepy

    sqfmi/beepy-hardware

    Beepy Hardware

    160 parts348MIT
  • 2 layers86.4 × 110 mmTeensy beats, the printed circuit board in 3D

    Teensy beats

    trailhead/teensy-beats

    Teensy Beats Shield

    144 parts67GPL-3.0
  • 2 layers158.5 × 60.5 mmTickerPCB, the printed circuit board in 3D

    TickerPCB

    hulonoj/TickerPCB

    ESP32 based 14-segment display PCB!

    106 parts1
  • 2 layers82 × 60 mmFinalMicroMouseFiles, the printed circuit board in 3D

    FinalMicroMouseFiles

    Eng-Claire/power_sub_systems

    EEE3088F MICROMOUSE PROJECT

    56 parts
  • 2 layers86.4 × 63.5 mmCounterProject, the printed circuit board in 3D

    CounterProject

    jgruen2/Counter

    This is PCB Counter

    82 parts
  • 4 layers96 × 96 mmMusicPlayer, the printed circuit board in 3D

    MusicPlayer

    JoshuaSLE/stm32g-music-player

    Standalone embedded audio system engineered with an STM32G031K8 microcontroller using HAL drivers for peripheral management and a VS1053B codec for real-time decoding and playback.

    79 partsMIT
  • 4 layers191.8 × 123 mmRdf kicad, the printed circuit board in 3D

    Rdf kicad

    megmem044/Portfolio

    This repo consists the source code for the different projects listed on my resume

    265 parts

Questions

How big is the Measure Battery Level PCB?

It measures 79 × 38.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Measure Battery Level use?

66 parts, built around the ATTINY85-20PU, ECH8693R-TL-W, MCP73831 and TPS61090_1_2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Measure Battery Level KiCad files?

From the node9909/Graduation-project-files repository on GitHub, at the commit this page was made from: the board is Hardware/Mesure Battery level/Measure Battery Level.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Measure Battery Level design in my own project?

Its repository states no licence, so its author keeps all rights: ask node9909 before reusing the design.