nobodywasishere/sphinx-pcbdraw12Sphinx extension for embedding KiCAD board views created with PcbDraw
NINA W102 minimal breakout is an open-source printed circuit board by nobodywasishere, from the nobodywasishere/sphinx-pcbdraw repository on GitHub, published under the MIT licence. It is a 2-layer board of 47 × 20.7 mm with 20 parts on 33 nets, routed with 476 tracks and 67 vias.
It is built around the NINA-W102-01B. Its parts include 4 capacitors, 3 resistors, 3 connectors, 2 switches and 1 IC. It belongs with the interfaces and adapters boards of this library.
docs/index.rst
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitors_SMD:C_1206_HandSoldering | C1, C2 |
| 2 | 10k | Resistors_SMD:R_1206_HandSoldering | R2, R3 |
| 2 | 1uF | Capacitors_SMD:C_1206_HandSoldering | C3, C4 |
| 2 | Conn_01x15 | lib:1X15_LOCK | J1, J2 |
| 1 | Aesthetics:OSHW-LOGO-MINI | ||
| 1 | lib:BREADBOARD_SPACING_80mm | ||
| 1 | 1k | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | 6_PIN_SERIAL_TARGETLOCK | 6_PIN_SERIAL_TARGET_SIDE_W_SILK | J3 |
| 1 | BOOT | switchessilicone:TACTILE_SWITCH_SMD_6.0X6.0MM | SW1 |
| 1 | G*** | lib:MakeZurich-15x11-silk | MakeZurich-15x11-silk |
| 1 | JUMPER-SMT_2_NC | lib:SMT-JUMPER_2_NC_TRACE_SILK | JP1 |
| 1 | LOGO | lib:GDG-logo-mono-withouttext-h5.6 | G*** |
| 1 | LOGO | lib:DuckTapeApproved-MIT | G*** |
| 1 | NINA-W102 | lib:NINA-W102 | U1 |
| 1 | PWR RED | LEDs:LED_1206_HandSoldering | D1 |
| 1 | RESET | switchessilicone:TACTILE_SWITCH_SMD_6.0X6.0MM | SW2 |
ldab/Node-RED-Energy-Harvesting-dashboard
Node-RED Energy Harvesting dashboard example, weather forecast, temperature and humidty measurement. MQTT, ESP32, u-blox NINA-W10, HTU21D, IBM Cloud, CloudMQTT
jonaschramm/race-tracker
Custom PCB data logger for motorcycle racing: GPS position + IMU motion data, logged to a microSD card, with an e-Paper status display. Built around an ESP32-S3 (WiFi/BT built in) so it can also stream/sync over WiFi.
oomlout/oomlout_oomp_project_bot_v_2
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
It measures 47 × 20.7 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the NINA-W102-01B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nobodywasishere/sphinx-pcbdraw repository on GitHub, at the commit this page was made from: the board is docs/NINA-W102_minimal_breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).