
Pcb power
nobodywasishere/ee193
This is a breakout board for the ST STTS75M2F and TDK NTCG103JF103FT1 design with KiCAD 6. PCB image generated using PcbDraw.

This is a breakout board for the ST STTS75M2F and TDK NTCG103JF103FT1 design with KiCAD 6. PCB image generated using PcbDraw.
Embedded Final is an open-source printed circuit board by nobodywasishere, from the nobodywasishere/ee193 repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board with 2 parts on 6 nets.

This is a breakout board for the ST STTS75M2F and TDK NTCG103JF103FT1 design with KiCAD 6. PCB image generated using PcbDraw.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Programming Header | Connector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_Vertical | J2 |
| 1 | Serial Header | Connector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_Vertical | J3 |

nobodywasishere/ee193
This is a breakout board for the ST STTS75M2F and TDK NTCG103JF103FT1 design with KiCAD 6. PCB image generated using PcbDraw.

nobodywasishere/ee193
This is a breakout board for the ST STTS75M2F and TDK NTCG103JF103FT1 design with KiCAD 6. PCB image generated using PcbDraw.

nobodywasishere/ee193
This is a breakout board for the ST STTS75M2F and TDK NTCG103JF103FT1 design with KiCAD 6. PCB image generated using PcbDraw.

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nobodywasishere/ee193 repository on GitHub, at the commit this page was made from: the board is 10-pcb-power/pcb_power/Embedded Final.kicad_pcb and its schematic 01-temp_sensor_breakout/temp_sensor_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).