2 layers25.4 × 50.8 mm
Pcb power
nobodywasishere/ee193
This is a breakout board for the ST STTS75M2F and TDK NTCG103JF103FT1 design with KiCAD 6. PCB image generated using PcbDraw.
25 parts1Apache-2.0
2 layers41.3 × 28.6 mm
Pcb power
nobodywasishere/ee1931This is a breakout board for the ST STTS75M2F and TDK NTCG103JF103FT1 design with KiCAD 6. PCB image generated using PcbDraw.
- Size
- 41.3 × 28.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 37
- Pads
- 124
- Tracks, vias
- 176, 61
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Feb 2022
- Updated
- 6 May 2022
Overview
Pcb power is an open-source printed circuit board by nobodywasishere, from the nobodywasishere/ee193 repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 41.3 × 28.6 mm with 40 parts on 37 nets, routed with 176 tracks and 61 vias.
It is built around the LORA-E5-HF, STTS75M2F and IN-S128TATRGB. Its parts include 9 resistors, 6 capacitors, 5 connectors, 3 ICs and 3 switches.
Main components
3README
01-temp_sensor_breakout/README.mdTemperature Sensor Breakout Board
This is a breakout board for the ST STTS75M2F and TDK NTCG103JF103FT1 design with KiCAD 6. PCB image generated using PcbDraw.
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | R_Small_US | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R5, R6, R7 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C3, C5 |
| 3 | SW_SPST | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW2, SW3, SW4 |
| 2 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7 |
| 2 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 1 | 2.2uH | TDK_VLS3012HBX:TDK-VLS3012HBX-0-0-MFG | L1 |
| 1 | Antenna_Shield | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | AE1 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | BT1 |
| 1 | CPU_jmp | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | CPU_jmp | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | C_Small | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | IN-S128TATRGB | RGB_LED:IN-S128TATRGB | U3 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | LoRa-E5 | LoRa-E5:LoRa-E5 | U2 |
| 1 | OSINT_Jmp | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP3 |
| 1 | Pins Header | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Left | J5 |
| 1 | Programming Header | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Pwr_jmp | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | Pwr_jmp | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | RP402N331F | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | STTS75M2F | STTS75M2F:STTS75M2F | CR1 |
| 1 | Serial Header | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | locked | Capacitor_SMD:C_0805_2012Metric | locked |
| 1 | locked | Button_Switch_SMD:SW_SPDT_CK-JS102011SAQN | locked |
| 1 | vreg_lx | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1 |
The 37 most common of 40 parts.
More from nobodywasishere/ee193
3- 2 layers16.5 × 16.5 mm
Temp sensor breakout
nobodywasishere/ee193
This is a breakout board for the ST STTS75M2F and TDK NTCG103JF103FT1 design with KiCAD 6. PCB image generated using PcbDraw.
8 parts1Apache-2.0 - 2 layers
Embedded Final
nobodywasishere/ee193
This is a breakout board for the ST STTS75M2F and TDK NTCG103JF103FT1 design with KiCAD 6. PCB image generated using PcbDraw.
2 parts1Apache-2.0
Similar boards
- 4 layers17.8 × 19 mm
- 4 layers38 × 53 mm
- 4 layers48 × 44.5 mm
Smol servo tmc6200
dognotdog/smol_servo
circuitry and software for controlling NEMA17 size brushless motors and stepper motors as servos.
120 parts5 - 2 layers52 × 56.6 mm
- 2 layers115 × 80 mm
- 2 layers77 × 51.4 mm
MZ2023
makezurich/makezurich-badge-2023
Repo for the badge, hardware, software and examples.
91 parts4MIT - 2 layers25.4 × 45.7 mm
CE LoRa E5-Breakout Module
CoreElectronics/CE-Makerverse-LoRa-E5-Breakout-Module
This is the repo for the Makerverse™ LoRa-E5 Breakout.
34 parts2 - 4 layers80 × 60 mm
Tinynode
Stary2001/my-mesh-nodes
Here's all my mesh stuff. Everything here is licensed under CERN OHL-P.
67 parts2CERN-OHL-P-2.0
Questions
How big is the Pcb power PCB?
It measures 41.3 × 28.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pcb power use?
40 parts, built around the LORA-E5-HF, STTS75M2F and IN-S128TATRGB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcb power KiCad files?
From the nobodywasishere/ee193 repository on GitHub, at the commit this page was made from: the board is pcb_power/pcb_power.kicad_pcb and its schematic 01-temp_sensor_breakout/temp_sensor_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcb power design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).