Nirajkeste/ESP32_PCBEsp32 is an open-source printed circuit board by Nirajkeste, from the Nirajkeste/ESP32_PCB repository on GitHub. It is a 2-layer board of 108.7 × 45.8 mm with 58 parts on 60 nets, routed with 413 tracks and 36 vias.
It is built around the CH340C, ESP32-WROOM-32D and LM2596S-5.0. Its parts include 21 capacitors, 16 connectors, 11 resistors, 5 diodes and 3 ICs. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21 +5 |
| 7 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6, R7, R8, R9 |
| 5 | ~ | Connector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_Vertical | J7, J8, J9, J10, J11 |
| 4 | Conn_01x08 | Connector_PinHeader_1.00mm:PinHeader_1x08_P1.00mm_Vertical | J12, J13, J14, J15 |
| 4 | LED | LED_SMD:LED_0201_0603Metric_Pad0.64x0.40mm_HandSolder | D2, D3, D4, D5 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R10, R11 |
| 1 | 1N5822 | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Conn_01x01 | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | J16 |
| 1 | Conn_01x02_Socket | Connector_PinSocket_1.00mm:PinSocket_1x03_P1.00mm_Vertical | J4 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_1.00mm:PinHeader_1x03_P1.00mm_Vertical | J6 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_Vertical | J5 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_EuroQuartz_MT-4Pin_3.2x2.5mm | Y1 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32D | U3 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_SwitchcraftConxall_RAPC10U_Horizontal | J2 |
| 1 | L | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U1 |
| 1 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-AB_Molex_47590-0001 | J1 |
| 1 | ~ | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
It measures 108.7 × 45.8 mm and has 2 copper layers, 1.6 mm thick.
58 parts, built around the CH340C, ESP32-WROOM-32D and LM2596S-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Nirajkeste/ESP32_PCB repository on GitHub, at the commit this page was made from: the board is esp32/esp32.kicad_pcb and its schematic esp32/esp32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Nirajkeste before reusing the design.
Khoapham2004/ESP32-to-ESP-NOW-Control
The second repository contains the hardware design of the robot. It is mostly based on the 2025 version, with updated sensors, the BTS signal removed from the previous design, and a PCB that primarily uses SMD…
RatnakarSahooVSSUT/ESP32-Custom-PCB
Custom ESP32 development board designed in KiCad
yogesh8441/ESP32-CUSTOM-DEVELOPMENT-BOARD
A custom-designed ESP32-WROOM-32D Development Board developed using KiCad 10. This project demonstrates the complete PCB design workflow, including schematic design, PCB layout, routing, ground plane implementation…
