Skip to the content
2 layers54.6 × 85.5 mmSignal generator, the printed circuit board in 3D

Signal generator

nikoloc/signal-generator

process of making a signal generator

Size
54.6 × 85.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
50
Pads
109
Tracks, vias
142, 4
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
27 Mar 2026
Updated
6 Oct 2026

Overview

Signal generator is an open-source printed circuit board by nikoloc, from the nikoloc/signal-generator repository on GitHub. It is a 2-layer board of 54.6 × 85.5 mm with 25 parts on 50 nets, routed with 142 tracks and 4 vias.

It is built around the ESP32-DEVKITC-VE and TL072. Its parts include 12 resistors, 4 capacitors, 4 connectors, 3 ICs and 2 transistors. It belongs with the ESP32 boards of this library.

Main components

2

Parts

25
QtyValueFootprintReferences
61kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R5, R8, R10, R11, R12
3100uCapacitor_THT:C_Radial_D6.3mm_H5.0mm_P2.50mmC5, C6, C7
2BC537Package_TO_SOT_THT:TO-92Q1, Q2
2TL072Package_DIP:DIP-8_W7.62mmU2, U3
110Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
1100Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR9
1100kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR6
11nCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC4
12kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
13kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR7
16kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1ESP32-DevKitCPCM_Espressif:ESP32-DevKitCU1
1Keypad JST ConnectorConnector_JST:JST_XH_B8B-XH-A_1x08_P2.50mm_VerticalJ1
1LCD ConnectorConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ4
1LED ConnectorConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ3
1SupplyConnector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ2

Similar boards

  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers115 × 75 mmSpinCoater, the printed circuit board in 3D

    SpinCoater

    RParkerE/OpenSilicon

    OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.

    11 parts55GPL-3.0
  • 2 layers127.3 × 54.1 mmESP32 SolarBox, the printed circuit board in 3D

    ESP32 SolarBox

    cole8888/SRNE-Solar-Charge-Controller-Monitor

    Read data from SRNE solar charge controllers.

    34 parts42
  • 2 layers62.2 × 57.1 mmWs2mqtt, the printed circuit board in 3D

    Ws2mqtt

    Tho85/ws2mqtt

    Connect WiSafe2 devices to Home Assistant

    8 parts28BSD-3-Clause
  • 2 layers99.9 × 99.9 mmSplit flap, the printed circuit board in 3D

    Split flap

    tinkermax/split-flap

    DIY mechanical spli-flap display

    28 parts13CC-BY-4.0
  • 2 layersJF ECU32, the printed circuit board in 3D

    JF ECU32

    JoachimF/JF-ECU32

    RC Jet Engine ECU

    27 parts12GPL-3.0
  • 2 layers72.5 × 84.8 mmDevboard, the printed circuit board in 3D

    Devboard

    ste2425/PSP-Bluetooth-AVConnector

    An AV-Out Breakout library for the PSP. Providing Kicad symbols and footprints to interface with the PSP 2/3K AVOut socket (also known as the TVOut socket)

    13 parts12
  • 2 layers100 × 88.9 mmGen2, the printed circuit board in 3D

    Gen2

    Alignof/Juggernaut

    疑似時限爆弾解除競技

    41 parts10MIT

Questions

How big is the Signal generator PCB?

It measures 54.6 × 85.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Signal generator use?

25 parts, built around the ESP32-DEVKITC-VE and TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Signal generator KiCad files?

From the nikoloc/signal-generator repository on GitHub, at the commit this page was made from: the board is design/design.kicad_pcb and its schematic design/design.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Signal generator design in my own project?

Its repository states no licence, so its author keeps all rights: ask nikoloc before reusing the design.