Skip to the content
2 layers100 × 100 mmNiController, the printed circuit board in 3D

NiController

niimi/ni-midicon
Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
366
Nets
291
Pads
1,320
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
11 Aug 2025
Updated
2 Aug 2026

Overview

NiController is an open-source printed circuit board by niimi, from the niimi/ni-midicon repository on GitHub. It is a 2-layer board of 100 × 100 mm with 366 parts on 291 nets.

It is built around the TEENSY 4.1, 74LVC1GU04GW and TPS2121RUXR, with the WS2812B-2020 among its other parts. Its parts include 177 capacitors, 137 diodes, 16 connectors, 16 switches and 10 resistors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.

Main components

4

Parts

366
QtyValueFootprintReferences
175100nCapacitor_SMD:C_0603_1608MetricC1001, C1002, C1003, C1101, C1102, C1103, C1201, C1202, C1203, C1401, C1402, C1403, C1404, C1405, C1406, C1407 +159
136WS2812B-2020LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mmD1401, D1402, D1403, D1404, D1405, D1406, D1407, D1408, D1409, D1410, D1411, D1412, D1413, D1414, D1415, D1416 +120
8RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mmSW501, SW601, SW701, SW801, SW901, SW1001, SW1101, SW1201
8SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW2301, SW2401, SW2501, SW2601, SW2701, SW2801, SW2901, SW3001
45kResistor_SMD:R_0603_1608MetricR202, R204, R206, R208
4MountingHole_PadMountingHole:MountingHole_2.5mm_Pad_ViaH201, H202, H203, H204
3Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ202, J203, J204
21uCapacitor_SMD:C_0603_1608MetricC201, C206
220.5kResistor_SMD:R_0603_1608MetricR201, R203
2Conn_01x03Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ403, J404
2Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1301, J1302
2Conn_02x03_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_VerticalJ302, J304
2Conn_02x03_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ402, J2202
2MCP23S17_SSPackage_SO:SSOP-28_5.3x10.2mm_P0.65mmU303, U304
1100Resistor_SMD:R_0603_1608MetricR301
110kResistor_SMD:R_0603_1608MetricR205
115kResistor_SMD:R_0603_1608MetricR207
122.1kResistor_SMD:R_0603_1608MetricR209
174LVC1GU04Package_TO_SOT_SMD:SOT-353_SC-70-5U302
1Barrel_Jack_SwitchConnector_BarrelJack:BarrelJack_HorizontalJ201
1Conn_02x05_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_VerticalJ303
1Conn_02x05_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ2201
1Conn_02x13_Odd_EvenConnector_PinSocket_2.54mm:PinSocket_2x13_P2.54mm_VerticalJ301
1Conn_02x13_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_VerticalJ401
1D_TVS_SmallDiode_SMD:D_SOD-523D201
1Q_PMOS_GDSPackage_TO_SOT_SMD:TO-252-2Q201
1TPS2121RUXRTPS2121RUXR:IC_TPS2121RUXRU201
1Teensy4.1teensy:Teensy41U301

More from niimi/ni-midicon

7

Similar boards

  • 2 layers100 × 75 mmRTSS Power Supply V2-5C, the printed circuit board in 3D

    RTSS Power Supply V2-5C

    RadioThermal/RadioThermal_Soldering_OSHW

    Open Source Hardware 470KHz Induction Soldering Iron

    69 parts84CERN-OHL-P-2.0
  • 6 layers187 × 109 mmHALPI2, the printed circuit board in 3D

    HALPI2

    hatlabs/HALPI2-hardware

    Hat Labs Pi Carrier Board 2 design files

    739 parts9
  • 4 layers114.9 × 129.9 mmTanmatsu, the printed circuit board in 3D

    Tanmatsu

    Nicolai-Electronics/tanmatsu-hardware

    Hardware design of the Tanmatsu mainboard

    372 parts9CERN-OHL-P-2.0
  • 4 layers70 × 36 mmEbyte addon, the printed circuit board in 3D

    Ebyte addon

    Nicolai-Electronics/tanmatsu-addon-ebyte-radio

    This repository contains the hardware design files for the Ebyte radio modules addon for the internal add-on connector of Tanmatsu.

    37 parts3CERN-OHL-P-2.0
  • 6 layers62.8 × 57.5 mmLab4, the printed circuit board in 3D

    Lab4

    stefan-zugravel/introduzione_elettronica

    158 partsMIT
  • 2 layers240 × 240 mmKfchess, the printed circuit board in 3D

    Kfchess

    misprit7/real-time-chess

    A physical chess board without the concept of turns

    235 parts254MIT
  • 4 layers111.8 × 54.5 mmTvc2.0, the printed circuit board in 3D

    Tvc2.0

    Lucan-Keyser/Astro499_TVC

    30 parts2

Questions

How big is the NiController PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the NiController use?

366 parts, built around the TEENSY 4.1, 74LVC1GU04GW, TPS2121RUXR and WS2812B-2020. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the NiController KiCad files?

From the niimi/ni-midicon repository on GitHub, at the commit this page was made from: the board is Kicad/NiController/NiController.kicad_pcb and its schematic Kicad/NiController/NiController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the NiController design in my own project?

Its repository states no licence, so its author keeps all rights: ask niimi before reusing the design.