

Overdrive guitar pedal made with atopile
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 59
- Pads
- 168
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 0.8.1 (file 20241229)
- Created
- 11 May 2025
- Updated
- 9 Jul 2025
Overview
Quick is an open-source printed circuit board by nickkrstevski, from the nickkrstevski/klone_pedal repository on GitHub, published under the MIT licence. It is a 2-layer board with 69 parts on 59 nets.
Its parts include 37 resistors, 22 capacitors, 7 ICs and 3 diodes. It belongs with the audio and music boards of this library.
README
README.mdklone_pedal
Overdrive guitar pedal
Created by Nicholas Krstevski nick@atopile.com
Assembly BOM Table
| Description | Link |
|---|---|
| Audio Jack |
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 1kΩ ±1% 100mW | atopile:R0603-ebcab9 | R3, R7, R15, R17, R18, R19, R20, R25, R26, R27, R28, R29, R30, R31, R32, R33 |
| 4 | atopile:SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL-294f77 | U1, U4, U6, U7 | |
| 4 | 100kΩ ±1% 62.5mW | atopile:R0402-56259e | R1, R24, R35, R37 |
| 4 | 1µF ±10% 50V X5R | atopile:C0603-bd72f6 | C16, C17, C19, C20 |
| 3 | 100nF ±10% 50V X7R | atopile:C0603-bd72f6 | C2, C7, C21 |
| 2 | atopile:SMA_L4.3-W2.5-LS5.0-RD-e683d9 | D2, D3 | |
| 2 | atopile:SOD-123FL_L2.7-W1.8-LS3.8-RD-0c8348 | U2, U3 | |
| 2 | 15kΩ ±1% 62.5mW | atopile:R0402-56259e | R4, R13 |
| 2 | 1µF ±10% 25V X5R | atopile:C0402-b3ef17 | C11, C12 |
| 2 | 47µF ±20% 25V X5R | atopile:C1206-f0a137 | C15, C18 |
| 2 | 560Ω ±1% 100mW | atopile:R0603-ebcab9 | R2, R23 |
| 2 | 68nF ±10% 16V X5R | atopile:C0201-a4ec75 | C3, C8 |
| 1 | atopile:SOP-8_L4.9-W3.9-P1.27-LS6.0-BL-0d1ac6 | U5 | |
| 1 | atopile:SOD-123_L2.7-W1.6-LS3.7-RD-30fb4b | D1 | |
| 1 | 1.5kΩ ±1% 62.5mW | atopile:R0402-56259e | R6 |
| 1 | 1.8kΩ ±1% 62.5mW | atopile:R0402-56259e | R34 |
| 1 | 100nF ±10% 16V X7R | atopile:C0402-b3ef17 | C13 |
| 1 | 10kΩ ±1% 100mW | atopile:R0603-ebcab9 | R11 |
| 1 | 10kΩ ±1% 62.5mW | atopile:R0402-56259e | R22 |
| 1 | 12kΩ ±1% 62.5mW | atopile:R0402-56259e | R10 |
| 1 | 1MΩ ±1% 100mW | atopile:R0603-ebcab9 | R21 |
| 1 | 2.2nF ±10% 25V X7R | atopile:C0201-a4ec75 | C5 |
| 1 | 22kΩ ±1% 100mW | atopile:R0603-ebcab9 | R8 |
| 1 | 27kΩ ±1% 100mW | atopile:R0603-ebcab9 | R9 |
| 1 | 27nF ±10% 16V X7R | atopile:C0402-b3ef17 | C6 |
| 1 | 2kΩ ±1% 100mW | atopile:R0603-ebcab9 | R12 |
| 1 | 3.9nF ±10% 50V X7R | atopile:C0402-b3ef17 | C22 |
| 1 | 390nF ±10% 16V X5R | atopile:C0402-b3ef17 | C4 |
| 1 | 390pF ±5% 25V C0G | atopile:C0201-a4ec75 | C10 |
| 1 | 4.7kΩ ±1% 100mW | atopile:R0603-ebcab9 | R36 |
| 1 | 4.7µF ±10% 16V X5R | atopile:C0603-bd72f6 | C1 |
| 1 | 4.7µF ±10% 50V X5R | atopile:C0805-3b2e55 | C14 |
| 1 | 422kΩ ±1% 62.5mW | atopile:R0402-56259e | R14 |
| 1 | 47kΩ ±1% 62.5mW | atopile:R0402-56259e | R16 |
| 1 | 5.1kΩ ±1% 100mW | atopile:R0603-ebcab9 | R5 |
| 1 | 82nF ±10% 16V X7R | atopile:C0402-b3ef17 | C9 |
More from nickkrstevski/klone_pedal
1- 2 layers104 × 36 mm

Similar boards
- 2 layers117.3 × 54.5 mm

- 2 layers100 × 96 mm

Backlight
jackw01/scanlight
A better light source for scanning color negative film
69 parts397CERN-OHL-W-2.0 - 2 layers135.9 × 102.2 mm

Ergo42
Biacco42/Ergo42
7x4 ortho linear split keyboard - The Answer to the Ultimate Question of Life, the Universe, and at least Keyboards
69 parts218 - 2 layers104.1 × 71.1 mm

Minifp
eigenco/frankenpi
This is an experimental project to connect Raspberry Pi with the help of cheap Cyclone IV FPGA board to 8-bit ISA bus to act as multiple different devices.
69 parts139 - 2 layers90 × 140 mm

Drumkid
mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.
69 parts137 - 2 layers120 × 60 mm

Overglade Badges
KaiPereira/Overglade-Badges
NFC hackathon badges for the Overglade game jam in Singapore!
69 parts126 - 2 layers142 × 20 mm

DeskController
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
69 parts94BSD-3-Clause - 2 layers163.1 × 111.9 mm

Questions
What parts does the Quick use?
69 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Quick KiCad files?
From the nickkrstevski/klone_pedal repository on GitHub, at the commit this page was made from: the board is layouts/quick/quick.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Quick design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).