
Osw
Open-Smartwatch/open-smartwatch-gps
Hardware design files for the GPS version of the open-smartwatch

This repo shows a pair of "AI" glasses that use a microphone, speaker, and microcontroller to allow users to have siri at all times (when on wifi).
Glasses V.01 is an open-source printed circuit board by nicka06, from the nicka06/Glasses-V.01 repository on GitHub. It is a 2-layer board of 29.5 × 90.2 mm with 31 parts on 53 nets, routed with 453 tracks and 57 vias.
It is built around the MCP73831T-2ACI/OT-HXY. Its parts include 7 resistors, 5 ICs, 4 capacitors, 2 diodes and 2 connectors. It belongs with the wearables and audio and music boards of this library.
This repo shows a pair of "AI" glasses that use a microphone, speaker, and microcontroller to allow users to have siri at all times (when on wifi). They'll be able to ask questions, complete tasks, and be more efficient with these glasses. While these glasses have only audio, it is a first step towareds glasses with cameras and more. This is my personal end goal for this project. Just a stepping stone towards more advance glasses work. (Hence the V0.1 repo name). If you have any questions, feel free to reach out.
|56.08 || Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1uF | mods:WCAP-CSGP_0603_R | 1uCapacitor1, C2, C3, C4, C5 |
| 3 | 5.1k | mods:RES_ERA3ARB512V | R1, R2, R3 |
| 2 | 10k | mods:RESC1608X55N | R4, R5 |
| 1 | 10uF | mods:CAPC1608X95N | 10ucapaitor1 |
| 1 | 10µF | mods:CAPC1608X95N | C8 |
| 1 | 1UF | mods:WCAP-CSGP_0603_R | C6 |
| 1 | 2.2µH | mods:INDC2520X120N | L1 |
| 1 | 220 Ohms | mods:RESC0816X55N | R6 |
| 1 | 220 ohms | mods:RESC0816X55N | R7 |
| 1 | 22µF | mods:CAPC1608X100N | C7 |
| 1 | 4.7uF | mods:CAPC1608X100N | C1 |
| 1 | Amplifier | mods:QFN50P300X300X80-17N | U3 |
| 1 | Battery Connector | mods:JST_B2B-PH-K-S_LF__SN_ | J1 |
| 1 | Buck Converter | mods:SOT95P280X145-5N | U5 |
| 1 | ESD protection | mods:SOTFL50P160X60-5N | U1 |
| 1 | LED Blue Light | mods:LEDC1608X65N | D2 |
| 1 | LED Red Light | mods:0603 | D1 |
| 1 | Manual Switch | mods:PCM12SMTR | U4 |
| 1 | Microcontroller | mods:ESP32S3WROOM1N8R2 | X1 |
| 1 | Microphone | mods:MIC_ICS-43434 | MK1 |
| 1 | Speaker | mods:SPKR_KDMG151508-05 | LS1 |
| 1 | Switch Button | mods:SW_TL3315NF160Q | S1 |
| 1 | USB C Port | mods:TE_2340901-1 | J2 |
| 1 | charge management controller | mods:SOT95P280X145-5N | U2 |

Open-Smartwatch/open-smartwatch-gps
Hardware design files for the GPS version of the open-smartwatch



QuickLogic-Corp/quick-feather-dev-board
100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain

jgillick/ThunderPack
A self-contained microcontroller, battery, and power management system that fits in your pocket.

maholli/SAM32
Feather-sized SAMD51 with M4 core serving as UART bridge to WROOM ESP32

teapotlaboratories/feather-rak3172
Teapotlabs Feather RAK3172: Low-cost Low-power LoRaWAN Development Board

wizarddata/Blue-Wizard-Mod
Bluetooth Controller for the Kinesis Advantage line of keyboards using the BlueMicro firmware
It measures 29.5 × 90.2 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the MCP73831T-2ACI/OT-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nicka06/Glasses-V.01 repository on GitHub, at the commit this page was made from: the board is pcb/Glasses_V0.1.kicad_pcb and its schematic pcb/Glasses_V0.1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nicka06 before reusing the design.