2 layers38.8 × 21.8 mm
2 layers37.5 × 19 mm
- Size
- 37.5 × 19 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 6
- Pads
- 19
- Tracks, vias
- 36, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 4 Jul 2026
- Updated
- 14 Aug 2026
Overview
LiPoBMS is an open-source printed circuit board by nick1076, from the nick1076/Learning-Module-Boards repository on GitHub. It is a 2-layer board of 37.5 × 19 mm with 10 parts on 6 nets, routed with 36 tracks and 0 vias.
It is built around the MCP73831T-2ACI/OT-HXY. Its parts include 2 capacitors, 2 resistors, 2 connectors, 1 IC and 1 diode.
Main components
1Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 4.7uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Left | J1, J2 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 2.2k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | MCP73831T-2ACI/OT | MCP73831T-2ACI:MCP73831T_2ACI_OT | U1 |
More from nick1076/Learning-Module-Boards
10- 2 layers35.8 × 17.7 mm
- 2 layers38.3 × 28.1 mm
- 2 layers47 × 25.3 mm
- 2 layers34.8 × 26.4 mm
- 2 layers29.8 × 18.8 mm
- 2 layers34.8 × 25.5 mm
- 2 layers41 × 24.3 mm
- 2 layers29.9 × 20.1 mm
- 2 layers40.5 × 26 mm
Similar boards
- 4 layers45 × 41 mm
Osw
Open-Smartwatch/open-smartwatch-gps
Hardware design files for the GPS version of the open-smartwatch
70 parts243GPL-3.0 - 4 layers38.4 × 128.5 mm
- 2 layers61 × 61 mm
- 4 layers58.4 × 22.9 mm
Quickfeather board
QuickLogic-Corp/quick-feather-dev-board
100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain
101 parts66CC-BY-SA-4.0 - 2 layers40.2 × 19.6 mm
Compact
jgillick/ThunderPack
A self-contained microcontroller, battery, and power management system that fits in your pocket.
59 parts44MIT - 4 layers100 × 100 mm
V25Panel
maholli/SAM32
Feather-sized SAMD51 with M4 core serving as UART bridge to WROOM ESP32
211 parts43 - 2 layers51 × 23.1 mm
Feather rak3172
teapotlaboratories/feather-rak3172
Teapotlabs Feather RAK3172: Low-cost Low-power LoRaWAN Development Board
53 parts43MIT - 2 layers108 × 95.3 mm
Blue Wizard
wizarddata/Blue-Wizard-Mod
Bluetooth Controller for the Kinesis Advantage line of keyboards using the BlueMicro firmware
47 parts38
Questions
How big is the LiPoBMS PCB?
It measures 37.5 × 19 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LiPoBMS use?
10 parts, built around the MCP73831T-2ACI/OT-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LiPoBMS KiCad files?
From the nick1076/Learning-Module-Boards repository on GitHub, at the commit this page was made from: the board is Modules/LiPoBMS/LiPoBMS.kicad_pcb and its schematic Modules/Analog & Digital Servo Tester/ServoTesterBoard/ServoTesterBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LiPoBMS design in my own project?
Its repository states no licence, so its author keeps all rights: ask nick1076 before reusing the design.