4 layers50 × 50 mm
Simpleboard
AlessioMorale/unav2_hardware
Initial test hardware for the future uNav board version
122 parts5MIT
2 layers122 × 68 mm
NiceRAMPS
NiceCircuits/NiceRAMPS4Improved version of RAMPS board with ribbon cable connecors and more.
- Size
- 122 × 68 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 135
- Nets
- 151
- Pads
- 567
- Tracks, vias
- 2,354, 122
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 6 Apr 2014
- Updated
- 26 Jun 2014
Overview
NiceRAMPS is an open-source printed circuit board by NiceCircuits, from the NiceCircuits/NiceRAMPS repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 122 × 68 mm with 135 parts on 151 nets, routed with 2,354 tracks and 122 vias.
It is built around the SN74HCT245PW, CD4504BPW and PMEG3010EJ, with the FDC6401N, JUMPER3 and SS54 among its other parts. Its parts include 32 resistors, 28 capacitors, 28 connectors, 20 diodes and 9 transistors.
Main components
7
SN74HCT245PW
TSSOP-20-40℃~+85℃ 1 14ns@5.5V,50pF 4.5V~5.5V 6mA 6mA 74HCT 8 80uA Bidirectional Tri-State TSSOP-20 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
CD4504BPW
TSSOP-16-55℃~+125℃ 1 5V~15V 5V~15V 6 CMOS TTL、CMOS Unidirectional TSSOP-16 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
PMEG3010EJ
SOD-3231 Independent 150uA@30V 1A 30V 560mV@1A 9A SOD-323 Schottky Diodes ROHSNexperiaSchottky Diodes
FDC6401N
SuperSOT-6-55℃~+150℃ 1.5V 2 N-Channel 20V 3.3nC@4.5V 324pF 3A 42pF 82pF 95mΩ@2.5V 960mW N-Channel SuperSOT-6 MOSFETs ROHSonsemiMOSFETsJUMPER3
HDR-TH_3P-P2.54-L7.6-W2.5HDR-TH-3P-2.54mm New Arrivals ROHSWürth ElektronikUncategorised
SS54
SMA(DO-214AC)-55℃~+125℃ 1mA@40V 40V 550mV@5A 5A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
IRLR2905ZPBF-HXY
TO-252-2L-55℃~+150℃ 1 N-channel 15mΩ@10V 19.3nC@4.5V 2.5V 45W 50A 60V 97pF N-Channel TO-252-2L MOSFETs ROHSHXY MOSFETMOSFETs
README
README.mdramps_plus
Forked from Ramps 1.4.
Improved version of RAMPS board with ribbon cable connecors and more.
Change log from Ramps 1.4:
-
a few ribbon header connectors instead of many pinheaders
-
schematic in KiCad
-
compatibility with Arduino Due
-
separate power supplies for heaters, bed and motors
-
0,5A OC outputs for driwing LED/fans
-
SMT power transistors
-
blade fuses
Parts
135| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 100n/50V | pnRLC:0603 | C1, C2, C3, C6, C11, C12, C15, C16, C17, C18, C20, C25, C26, C27, C28, C29 +1 |
| 15 | 4k7 1% | pnRLC:0603 | R2, R6, R10, R12, R13, R15, R18, R20, R24, R25, R26, R27, R30, R31, R32 |
| 13 | 22k | pnRLC:0603 | R1, R4, R5, R7, R9, R11, R14, R16, R17, R19, R22, R23, R28 |
| 11 | PMEG3010EJ | pnSemiconductor:SOD323F | D8, D9, D10, D11, D13, D14, D16, D17, D18, D19, D20 |
| 6 | 4u7/10V | pnRLC:0805 | C7, C9, C14, C21, C22, C23 |
| 6 | FDC6401N | pnSemiconductor:SOT23-6 | Q3, Q4, Q6, Q7, Q8, Q9 |
| 5 | 100u/35V | pnRLC:Cpol-6.3x7.7 | C4, C5, C10, C13, C19 |
| 5 | CON8 | pnPinheaders:PIN8_a | CON2, CON3, CON4, CON6, CON7 |
| 5 | Jumper3 | pnPinheaders:PIN3x2SMD | JP1, JP2, JP3, JP4, JP5 |
| 5 | SS54 | pnSemiconductor:SMC | D1, D2, D3, D4, D5 |
| 5 | Stepstick_Left_Connector | pnPinheaders:PIN8_a | CON10, CON12, CON14, CON17, CON19 |
| 5 | Stepstick_Right_Connector | pnPinheaders:PIN8_a | CON11, CON13, CON15, CON18, CON20 |
| 3 | 10R | pnRLC:0603 | R3, R8, R21 |
| 3 | IRLR2905ZPBF | pnSemiconductor:Dpak | Q1, Q2, Q5 |
| 3 | RED | pnSemiconductor:0805D | D6, D7, D12 |
| 1 | 1k | pnRLC:0603 | R29 |
| 1 | AUX | pnIDC:IDC10_a | CON5 |
| 1 | BED | pnConnector:phoenix2 | CON27 |
| 1 | BED | pnConnector:Littlefuse_01530008 | F1 |
| 1 | BED_Th | pnPinheaders:PIN2 | CON28 |
| 1 | CD4504BPW | pnSemiconductor:TSSOP16 | U1 |
| 1 | CON10 | pnPinheaders:PIN10_a | CON1 |
| 1 | CON18x2 | pnPinheaders:PIN18x2reverse_a | CON8 |
| 1 | CON6 | pnConnector:phoenix6 | CON24 |
| 1 | Carriage | pnIDC:IDC34_a | CON9 |
| 1 | Chamber | pnIDC:IDC10_a | CON26 |
| 1 | E1 | pnModules:stepstickFootprint | MECH6 |
| 1 | E2 | pnModules:stepstickFootprint | MECH3 |
| 1 | FAN | pnPinheaders:PIN3_a | CON25 |
| 1 | GREEN | pnSemiconductor:0805D | D15 |
| 1 | Heaters | pnConnector:Littlefuse_01530008 | F2 |
| 1 | Motors | pnConnector:Littlefuse_01530008 | F3 |
| 1 | PS-ON | pnPinheaders:PIN4_a | CON23 |
| 1 | Panel1 | pnIDC:IDC10_a | CON21 |
| 1 | Panel2 | pnIDC:IDC10_a | CON22 |
| 1 | RESET | pnPinheaders:PIN2_a | SW1 |
| 1 | SN74HCT245PW | pnSemiconductor:TSSOP20 | U2 |
| 1 | Symbol_OSHW-Logo_CopperTop_Negative_07Jul2012 | symbols:Symbol_OSHW-Logo_CopperTop_Negative | SYM |
| 1 | Symbol_OSHW-Logo_SilkScreen_07Jul2012 | symbols:Symbol_OSHW-Logo_SilkScreen_1 | SYM |
| 1 | X | pnModules:stepstickFootprint | MECH2 |
| 1 | Y | pnModules:stepstickFootprint | MECH5 |
| 1 | YZ | pnIDC:IDC28_a | CON16 |
| 1 | Z | pnModules:stepstickFootprint | MECH4 |
Questions
How big is the NiceRAMPS PCB?
It measures 122 × 68 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NiceRAMPS use?
135 parts, built around the SN74HCT245PW, CD4504BPW, PMEG3010EJ and FDC6401N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NiceRAMPS KiCad files?
From the NiceCircuits/NiceRAMPS repository on GitHub, at the commit this page was made from: the board is kicad/NiceRAMPS.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the NiceRAMPS design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers88.9 × 50.8 mm
- 2 layers22.9 × 38.1 mm
KR573RF5 Adapter
IlyaBOT/LunarView3
Отдельная двухслойная плата программатора параллельных EPROM, 150×105 мм. USB и CH340 расположены слева, ATmega328P — в центре, регистры адреса и DIP-28 — справа; дополнительная силовая часть находится снизу.
12 parts - 4 layers85 × 54 mm
Integrated motor controller
kgieselman/integrated_motor_controller_pcb
Integrated Motor Controller for a robotics competion hosted by my work. The competitions changes each year so this board is flexible and contains mutliple headers for expanding to daughter boards.
150 partsCERN-OHL-S-2.0 - 6 layers50 × 50 mm
Repeat hw
WojtaCZ/repeat-hw
A repository containing hardware files (KiCad project) for the REPEAT board
158 parts - 2 layers80 × 60 mm
- 2 layers271.8 × 114.3 mm
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
426 parts282 - 2 layers49 × 49 mm
OSBMS Balancer Rev 0.9
Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system
76 parts248