2 layers70 × 56 mm
2 layers61.4 × 40 mm
LightStripSensor
nhthai173/pcb- Size
- 61.4 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 22
- Pads
- 64
- Tracks, vias
- 69, 0
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 Feb 2025
- Updated
- 6 Oct 2026
Overview
LightStripSensor is an open-source printed circuit board by nhthai173, from the nhthai173/pcb repository on GitHub. It is a 2-layer board of 61.4 × 40 mm with 17 parts on 22 nets, routed with 69 tracks and 0 vias.
It is built around the HLK-LD2410B, IRLR7843-DO and SMBJ15A. Its parts include 6 capacitors, 3 connectors, 2 resistors, 2 ICs and 2 diodes. It belongs with the ESP32 and RISC-V boards of this library.
Main components
3HLK-LD2410B
SMD-5_1.27PSMD-5_1.27P New Arrivals ROHSHI-LINKUncategorised
IRLR7843-DO
TO-252UncategorisedDOINGTER
SMBJ15A
DO-214AA(SMB)-65℃~+150℃ 15V 18.5V 1uA 24.4V 24.6A@10/1000us 600W@10/1000us TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C5, C6 |
| 2 | 100uF | Capacitor_SMD:C_Elec_8x10.2 | C2, C3 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 3A | Diode_SMD:D_SMA_Handsoldering | D1 |
| 1 | 7A fast | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | DC_IN 12V 5.5x2.1 | Connector_BarrelJack:BarrelJack_Horizontal | J2 |
| 1 | ESP32-C3-SuperMini | nhtlib:ESP32-C3-SuperMini-DIP | U1 |
| 1 | HLK-LD2410B | nhtlib:HLK-LD2410B | J3 |
| 1 | IRLR7843 | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | L7805 (TO-263) | Package_TO_SOT_SMD:TO-263-3_TabPin2 | U2 |
| 1 | LED_OUT 5.5x2.1 | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | SMBJ15A | Diode_SMD:D_SMB | D3 |
Questions
How big is the LightStripSensor PCB?
It measures 61.4 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LightStripSensor use?
17 parts, built around the HLK-LD2410B, IRLR7843-DO and SMBJ15A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LightStripSensor KiCad files?
From the nhthai173/pcb repository on GitHub, at the commit this page was made from: the board is LightStripSensor/LightStripSensor.kicad_pcb and its schematic LightStripSensor/LightStripSensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LightStripSensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask nhthai173 before reusing the design.
Similar boards
- 6 layers211 × 192.7 mm
- 2 layers180.3 × 63.5 mm
- 2 layers106.7 × 123.2 mm
12VSupport
svpetry/12VSupport
System to support a vehicle 12V electrical system with a LiIon battery to prevent the lead battery from depletion.
97 parts - 2 layers115 × 78 mm
- 2 layers65 × 30 mm
- 6 layers36 × 124 mm
OpenDual Reader
nuerolynx/embedded-systems-lab
Arduino UNO R4 WiFi and ESP32 prototypes for access control, automation, displays, monitoring, and Bluetooth audio.
74 parts4 - 8 layers217.5 × 187.5 mm
Board c openroute partial
ajisrawi/passive-radar-counter-drone
Passive radar for counter-drone using DVB-T, 4G and 5G: simulation, receiver hardware, FPGA micro-Doppler firmware, antennas, enclosure
314 parts3