Skip to the content
2 layers100 × 100 mmCresk, the printed circuit board in 3D
Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
52
Nets
64
Pads
275
Tracks, vias
318, 1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
5 May 2022
Updated
29 Aug 2023

Overview

Cresk is an open-source printed circuit board by nguyendown, from the nguyendown/cresk repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 100 × 100 mm with 52 parts on 64 nets, routed with 318 tracks and 1 via.

Its parts include 25 diodes, 21 switches, 4 connectors and 1 IC.

Parts

52
QtyValueFootprintReferences
251N4148cresk:D_DO-35D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +9
19SW_Pushcresk:SW_MX_1u_ReversibleSW1, SW2, SW3, SW4, SW5, SW6, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW18, SW19, SW20 +3
28P8CConnector_RJ:RJ45_Ninigi_GEJ1, J2
2Conn_01x05_Malecresk:J-01x05J3, J4
1EC11cresk:EC11SW17
1SSD1306_I2Ccresk:SSD1306_I2CDS1
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW21
1WeAct_BlackPillcresk:WeAct_BlackPill_FlippedU1

More from nguyendown/cresk

1
  • 2 layers101.8 × 73 mmCresk choc, the printed circuit board in 3D

    Cresk choc

    nguyendown/cresk

    21 parts2CC0-1.0

Similar boards

  • 2 layers41.4 × 47.5 mmU2f zero panel, the printed circuit board in 3D

    U2f zero panel

    conorpp/u2f-zero

    U2F USB token optimized for physical security, affordability, and style

    52 parts2.4k
  • 2 layers136 × 130 mmLora nodemcu, the printed circuit board in 3D

    Lora nodemcu

    sudomesh/disaster-radio

    A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.

    52 parts1.1k
  • 2 layers69 × 53.8 mmTUSS4470 shield, the printed circuit board in 3D

    TUSS4470 shield

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    52 parts530
  • 2 layers52.5 × 36.6 mmESP8266-WebRadio, the printed circuit board in 3D

    ESP8266-WebRadio

    karawin/Ka-Radio

    A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix

    52 parts453
  • 2 layers105.2 × 42.4 mmRWR CONTROL PANEL, the printed circuit board in 3D

    RWR CONTROL PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    52 parts431
  • 2 layers45 × 45 mmAirCube, the printed circuit board in 3D

    AirCube

    StuckAtPrototype/AirCube

    Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

    52 parts379Apache-2.0
  • 2 layers160 × 99.1 mmArdumower mega shield V1.00, the printed circuit board in 3D

    Ardumower mega shield V1.00

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    52 parts282
  • 2 layers53 × 23 mmMaam 011109 bias, the printed circuit board in 3D

    Maam 011109 bias

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    52 parts205

Questions

How big is the Cresk PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Cresk use?

52 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Cresk KiCad files?

From the nguyendown/cresk repository on GitHub, at the commit this page was made from: the board is cresk_100/cresk.kicad_pcb and its schematic cresk_100/cresk.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Cresk design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).