

Sawareru v4
A "touchable" remote FPGA lab system
- Size
- 99 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 87
- Pads
- 248
- Tracks, vias
- 530, 85
- Pours
- 28
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Apr 2024
- Updated
- 4 Mar 2026
Overview
Sawareru v4 is an open-source printed circuit board by nfproc, from the nfproc/SawareruSys repository on GitHub. It is a 2-layer board of 99 × 55 mm with 41 parts on 87 nets, routed with 530 tracks and 85 vias.
It is built around the PIC18F45K50-E/P and ULN2003A. Its parts include 13 switches, 9 diodes, 5 resistors, 4 capacitors and 3 ICs. It belongs with the fPGA and programmable logic boards and the PIC boards of this library.
Main components
2PIC18F45K50-E/P
PDIP-40-40℃~+125℃ 10bit 2.3V~5.5V 256Byte 2KB 32KB 33 48MHz 8 Bit Built-in FLASH PIC PDIP-40 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)ULN2003A
SOP-16-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 50V Seven channels SOP-16 Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays
README
README.mdSawareruSys: A "touchable" remote FPGA lab system
Copyright (C) 2022-2026 Naoki FUJIEDA. All rights reserved.
概要
ディジタル回路や FPGA の学習におけるこれまでの遠隔学習システムには, その操作から実際にハードウェアに触れているとの実感を得ることが難しい, という問題点がありました.例えば,ACRi ルーム上の仮想マシンには FPGA ボードが接続されているものの,そのスイッチや LED 等を直接操作・確認 することはできませんでした.
本リポジトリでは,この問題点に対する解決法として開発された,ディジタル 回路の「さわれる」遠隔学習システム SawareruSys のソースコード一式を 公開しています.詳しい学術的背景や,システムの設計・評価については, 以下の文献を参照してください.
N. Fujieda and A. Okuchi. A Novel Remote FPGA Lab Platform Using MCU-based Controller Board. In 12th International Conference on Teaching, Assessment and Learning for Engineering (TALE 2023), pp. 188-193, 2023, DOI: 10.1109/TALE56641.2023.10398409.
ユーザ向けの説明は,ユーザマニュアルを参照してください.マニュアルは, 本リポジトリの Manual/main.pdf または配布パッケージの UserManual.pdf にあります.
配布パッケージのダウンロード: ZIP (33.7 MiB)
本リポジトリの内容:
- Board/ : コントローラボードの KiCad による設計ファイル一式
- v2/ : 「FPGA リモコンボード V2」用
- v4/ : 「FPGA リモコンボード V4」および「SawareruBoard V1」用
- Connector/ : コントローラボードと FPGA ボードとの通信中継アプリ
- Client/ : PC 側で動作させる Connector アプリ(C# + WPF)
- Server/ : 遠隔サーバ側で動作させる Connector アプリ(Python)
- DRFront/ : DRFront
- Manual/ : ユーザマニュアルの LaTeX ソース一式
- PIC/ : コントローラボード上の PIC 制御プログラム(C)
- RemoCon_v2.X : 「FPGA リモコンボード V2」用
- RemoCon_v4.X : 「FPGA リモコンボード V4」および「SawareruBoard V1」用
- svinst_port/ : svinst_port
動作環境
- PC 側: Windows 10 以降 + .NET Framework 4.8
- サーバ側: Ubuntu 20.04 LTS 以降 + Python 3.8 以降 + Vivado 2020.2 以降
配布パッケージをビルドする際には,msbuild と Rust (cargo) も必要です. msbuild 17.14.40 (Visual Studio 2022) および cargo 1.93.1 の環境で ビルドできることを確認しています.
配布パッケージのビルド
配布パッケージのビルドは,PowerShell スクリプト Generate_Dist.ps1 により自動的に行います.このスクリプトは,作業フォルダとして Build, Dist,Pkg の3つのフォルダを作成し,SawareruSys の配布パッケージを SawareruSys_dist.zip,DRFront の配布パッケージを DRFront_dist.zip として,それぞれ保存します.
ライセンス
サブモジュール(DRFront と svinst_port),および PIC/RemoCon_v2.x
フォルダの usb_ で始まるファイルを除く各ファイルには,New BSD
ライセンスが適用されます.
また,SawareruSys の配布パッケージには以下のソフトウェアが含まれ, それぞれのライセンスに従ってバイナリを再配布しています.
- DRFront: New BSD ライセンス
- Ookii.Dialogs.Wpf: New BSD ライセンス
- svinst_port: MIT ライセンス
- WinSCP: GPL v3 ライセンス
PIC/RemoCon_v2.x フォルダの usb_ で始まるファイル群は,Microchip
USB ライブラリの一部であり,Microchip 社の著作物です.これらには
Apache ライセンス v2.0 が適用されます.
詳細は COPYING ファイルを参照してください.
更新履歴
-
v1.2.0 2026-03-04
- DRFront のバージョンを 0.7.0 に更新.
- 再配布する WinSCP のバージョンを 6.5.5 に更新.
- 上記更新に伴うビルドスクリプトの修正.
-
v1.1.0 2025-05-08
- DRFront のバージョンを 0.6.0 に更新.
- 上記更新に伴うビルドスクリプトの修正.
-
v1.0.1 2024-05-06
- DRFront のバージョンを 0.5.1 に更新.
- 配布パッケージをビルドする際,前回作成した zip ファイルを上書き するように変更.
-
v1.0.0 2024-04-03
- 最初のバージョン.
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Green | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3, D4, D5, D6, D7, D8, D9 |
| 8 | SW_SPDT | Board:SW_Slide_SSSS213202 | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 5 | SW_Push | Board:SW_SPST_TS-06104 | SW9, SW10, SW11, SW12, SW13 |
| 2 | 0.1U | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | 1K | Resistor_SMD:R_Array_Convex_4x0603 | RN1, RN2 |
| 2 | 2.2U | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4 |
| 2 | 330 | Resistor_SMD:R_Array_Convex_4x0603 | RN3, RN4 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 1 | 10K | Resistor_SMD:R_Array_Convex_4x0603 | RN5 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | Conn_PIC_ICSP_ICD | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | CN2 |
| 1 | OSL40391-LX | Board:OSL40391 | U2 |
| 1 | PIC18F45K50 | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | RED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | ULN2003A | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | USB_C_2.0 | Board:USB_HRO_TYPE-C-31-M-12 | CN1 |
More from nfproc/SawareruSys
1- 2 layers130 × 55 mm

Similar boards
- 2 layers107 × 54 mm

- 4 layers93.3 × 60.3 mm

Arduino 386EX V5
dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs
56 parts114 - 2 layers52 × 61 mm

Arduino motorfocus
fehlfarbe/arduino-motorfocus
Arduino motorfocus with moonlite protocol for telescopes
23 parts58MIT - 4 layers199.9 × 69.3 mm

Zaphod controller
Scottapotamas/zaphod-bot
A DIY high performance delta-bot for fun, and lightpainting...
251 parts53 - 4 layers285.1 × 48.1 mm

Ayab esp32
AllYarnsAreBeautiful/ayab-hardware
Contains the schematics and layouts for the AYAB Arduino shield
246 parts50CC-BY-SA-4.0 - 2 layers

- 2 layers40 × 80 mm

Splitflappcb
codingcatgirl/split-flap-fae-pcb
Alternative drop-in replacement PCB for David Kingsman's split-flap display
46 parts31Apache-2.0 - 2 layers177.9 × 187.4 mm

Audio board 0033 rev.a
palazzol/CyberamicControlCenter
Repo for docs and info about the Cyberamic Control Center
105 parts16
Questions
How big is the Sawareru v4 PCB?
It measures 99 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sawareru v4 use?
41 parts, built around the PIC18F45K50-E/P and ULN2003A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sawareru v4 KiCad files?
From the nfproc/SawareruSys repository on GitHub, at the commit this page was made from: the board is Board/v4/Sawareru_v4.kicad_pcb and its schematic Board/v4/Sawareru_v4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sawareru v4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask nfproc before reusing the design.