nfe19/Sensor_BoardA PCB board with firmware to control sensors
SensorControlBoard is an open-source printed circuit board by nfe19, from the nfe19/Sensor_Board repository on GitHub. It is a 4-layer board of 58.4 × 53.9 mm with 89 parts on 95 nets, routed with 1,046 tracks and 105 vias.
It is built around the LP5018RSMR, OPT3002DNPR and ASMB-TTF0-0A20B, with the AT24CS04-XHM-B, ICM-42670-P and TLV1117LV33DCYR among its other parts. Its parts include 24 resistors, 23 capacitors, 14 ICs, 9 connectors and 5 diodes. It belongs with the sensors and measurement boards and the STM32 boards of this library.
A PCB board with firmware to control sensors
This project looks at a PCB design and looks at an implementation of firmware to design somthing useful with the sensors
| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 1K5 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R10, R11, R12, R13, R17, R18, R19, R21, R22, R23, R24 +4 |
| 12 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C5, C11, C12, C13, C14, C16, C17, C18, C19, C20, C22 |
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C6, C8, C15, C21, C23 |
| 6 | ASMB-TTF0-0A20B | ASMB-TTF0-0A20B:PLCC-6 | U6, U7, U8, U9, U10, U11 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | GPIO1, GPIO2, GPIO3, GPIO4, GPIO5, GPIO10 |
| 4 | Conn_01x02_Pin | Connector_PinHeader_1.00mm:PinHeader_1x02_P1.00mm_Vertical | J2, J6, J7, J8 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 5K1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R16, R20 |
| 3 | Yellow | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3, D5 |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10 |
| 2 | Conn_01x10_Pin | Connector_PinHeader_1.00mm:PinHeader_1x10_P1.00mm_Vertical | J4, J5 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 120R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | FB1 |
| 1 | 16MHz OSC | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | 3K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | AT24CS04-XHM | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U12 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_1.00mm:PinHeader_1x05_P1.00mm_Vertical | J10 |
| 1 | ICM-42670-P | ICM-42670-P:XDCR_ICM-42670-P | U14 |
| 1 | LP5018RSMR | LP5018RSMR:QFN40P400X400X100-33N | U5 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Hirose_DM3D-SF | J1 |
| 1 | NUP4114UCLW1T2G | NUP4114:SC-88&slash_SC70-6&slash_SOT-363_419B-02_ONS_OSI-M | CR1 |
| 1 | OPT3002DNPR | ASMB-MTB1-0A3A2:DNP6_TEX | U13 |
| 1 | Red | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | SM5817PL-TP | Diode_SMD:D_SOD-123 | D4 |
| 1 | STM32F103C8T6TR | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_SPDT | Connector:FanPinHeader_1x03_P2.54mm_Vertical | SW1 |
| 1 | TLV1117LV33DCYR | TLV1117LV33DCYR:VREG_TLV1117LV33DCYR | U2 |
| 1 | TMAG5170-Q1 | Package_SO:VSSOP-8_3.0x3.0mm_P0.65mm | U4 |
| 1 | TMAG5273B1QDBVR | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U3 |
| 1 | USB_C_Receptacle_USB2.0 | USBC:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J11 |
It measures 58.4 × 53.9 mm and has 4 copper layers, 1.58 mm thick.
89 parts, built around the LP5018RSMR, OPT3002DNPR, ASMB-TTF0-0A20B and AT24CS04-XHM-B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the nfe19/Sensor_Board repository on GitHub, at the commit this page was made from: the board is SensorControlBoard/SensorControlBoard.kicad_pcb and its schematic SensorControlBoard/Misc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask nfe19 before reusing the design.
Flynsky/phenobottle-sensorboard
Phenobottle Sensor Board – A compact board for monitoring and controlling algae growth chambers, featuring pH, temperature, and light measurement frontends, a high-gain dual-stage transimpedance amplifier, a capacitive…
CodeByMika/technikerarbeit2026-hardwarepruefadapter
Im Schuljahr 2025/2026 wurde im Rahmen der Ausbildung zum staatlich geprüften Techniker diese Technikerarbeit in Zusammenarbeit mit der Gottlieb Daimler Schule 2 in Sindelfingen sowie der SOTEC GmbH & Co KG in…
antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/
MayaPosch/LEDNip
STM32F427-based developer board with 5 channels for controlling LEDs.
cda-tum/mmft-openSLAice
Dedicated slicer for masked sterolithography (mSLA) 3D printing of microfluidic devices.
PolygonHJ/xihe
Xihe is a self-sustaining, ultra-low-power sensing platform designed for long-lifetime deployments with zero maintenance.
