
Wlfkbd
WillACosta/wlfkbd
The WLF is a 40-key split keyboard (20 keys per half) with a column-staggered matrix and a splayed thumb cluster.

Autonomous Weather-Telling Snow Globe with a custom propulsion mechanism, PWM control, backlighting, E-INK display, support for my existing ecosystem of temperature sensors, and a changeable theme. Entry for Hack Club Blueprint's Christmas Competition.
Wingglobe is an open-source printed circuit board by newtontriumphant, from the newtontriumphant/wingglobe repository on GitHub. It is a 2-layer board of 93 × 100 mm with 30 parts on 37 nets, routed with 341 tracks and 40 vias.
It is built around the SK6812MINI-E and AO3400A. Its parts include 16 diodes, 4 resistors, 2 capacitors, 2 ICs and 2 connectors. It belongs with the lEDs and displays and sensors and measurement boards and the ESP32 boards of this library.
Quick Link Tree:
Heyo! Thanks for reviewing my project! I'm zsharpminor (a.k.a. funkeudo), co-creator of FiddleStein, and this is WingGlobe, which is a (TL;DR) fully autonomous Weather-Telling Snow Globe with a custom propulsion mechanism, PWM control, backlighting, E-INK display, support for my existing ecosystem of temperature sensors, and a changeable theme. This project is being created with the support of Hack Club Blueprint, and it is an entry for Blueprint's 7-day Christmas-Themed Project Competition. I am aiming for this to be a Tier 3 project (see section at the very end of this README for justification).
(Disclaimer: the above image is a render, this project is not actually built yet; CAD screenshots can be found in section IV).
IMPORTANT REVIEWER'S NOTE: there is a section at the end of this README.md file, please read through it before returning this project if possible :)
My BOM.csv is in the parent directory, additionally a link to my online BOM is https://docs.google.com/spreadsheets/d/1PTxZxDy7cq01-oPVpPEEbVuQKtVb_WSBa-1fNMrsmt8/. Thanks! :3
Before I get into why I made this project, I would like to extend a huge thanks to can can't aka kleigh (my hero), as well as sam, alex, zach, renran, deven, paolo, john cohn, olive, my teammates Max & Sidd, tanuki, nathan, everyone from AMD, and every single other equally important person that made Blueprint & Prototype happen - I literally found out about Blueprint (and Hack Club itself!) only a month and a week ago, finished a few projects and became a reviewer one week later, had the most fun I've ever had at Prototype, as well as inspired myself to get back into hardware, and re-dedicate my life to electronics. I really appreciate everything each and every one of you has done, and, without further ado, here's why WingGlobe exists.
You're probably looking at this and asking me "why the hell would you make a smart snow globe?!" The answer is a bit more complex than you think!
To start off with, I'm going to say quite bluntly that this project wouldn't exist without the Blueprint Christmas Competition. Even though I've worked with hardware for years, got HM with a self playing violin, and have been a Blueprint reviewer for over a month, I don't actually own a 3D printer (I've been using my local library's for all of my past projects so far)! I was planning on buying one a few weeks ago, then I set myself the challenge of getting one through Blueprint by reviewing a lot and getting tickets - but my current pace is rather lackluster. In addition, I needed ideas for projects to build - Blueprint is awesome because you can ship literally anything you can imagine, as long as it's under a certain dollar amount; but I was facing a bit of a creative block until this competition came about! My first project idea was to make a laser projecting 2026 New Year's countdown - but then I remembered that New Years would be over by the time this project would be built! My goal with WingGlobe was to make a project that, while Christmas-themed, doesn't rely on Christmas to exist and can be used at any time of the year! (Christmas in July, anyone?)
Additionally, I've made an ecosystem of projects (including one that I made through Blueprint - my SmartBell!) that feature temperature and humidity sensors. I wanted them to seamlessly work together wirelessly somehow, and needed a way to make that possible. That is also the main reason I chose the ESP32-S3 for this project, besides the fact that I already owned one, that it would cut PCBA cost in half, and that it would require one less parcel to be shipped.
Finally, I've been interested in weather and meteorology in general for a few years now, and I always wanted a weather station that relied on multiple sources of data that I myself provide, in addition to the commercial weather reports available.
The Snow Globe that builds this project's core features an empty space for any 3d model or figurine (assuming it's heavy enough to withstand the fan blowing snow around it!) - and I've chosen a Christmas-themed one for my first few months with WingGlobe to fit the competition's theme.
Finally, if you're wondering why it's called WingGlobe, it's a reference to aviation, where meteorology is key (bad name, I know, but it stuck!)
I wanted WingGlobe to fit these criteria:
I think I did a pretty good job fitting these criteria, if I do say so myself. Anyways, enough yapping, here's what the project actually does:
WingGlobe is basically a glorified weather report station powered by a SEEED Studios XIAO ESP-32-S3 (that I already own - more on that in Section V) that runs 16 addressable SK6812-MINI LEDs, as well as an onboard temp/humi/pressure sensor and a MOSFET powering a 4010 fan with PWM control. When the weather shifts, the snow globe is updated to match - calm weather is a white / light-blue gradient and no fan power, sunny weather is a yellow / light red gradient, sunrise and sunset are adapted to red / orange gradients, and during the night, the snow globe will be engulfed in a replica of the aurora borealis (clear sky) or simply white / dark blue (cloudy sky). The real fun begins when it rains! When the winds start, the 4010 fan's PWM controller starts to rev it up - the more dangerous the wind, the more the little snow in the globe will swirl around! I am planning to use lightweight cotton / styrofoam blend beads to imitate snow (my original idea of 3D printing them sadly failed), as well as a custom mesh that stops them from breaking the fan or going out of the top of the globe. WingGlobe's E-Ink can be customized with a touch pad on WingGlobe's PCB to show varying levels of information from varying sensors. Additionally, the fan and LEDs can be turned off with a switch on WingGlobe's side when not needed (i.e. overnight).
WingGlobe seamlessly integrates with my SmartBell, moonboard, ADS-B stations, and BarnSense projects to provide up to three different simultaneous readings of temperature, humidity, and pressure. WingGlobe also has a built-in sensor for indoor temperature and humidity (should be quite useful next to my soon-to-be 3D Printer!) For now, WingGlobe relies on commercially available data for wind readings, but I hope to create another project soon so that everything can be run off the grid and without requiring any API.
WingGlobe's ESP32-S3 connects via ESP-NOW and WiFi to fetch data from my close and far stations, respectively. You're halfway there, have a cookie! 🍪
(base, with cutouts for PCB, fan, and globe)
(top, made to be glued onto base)
(top view)
(side view)
(bottom view)
(top - birds-eye view without lid)
(Front - Angle One)
(Front - Angle Two)
(Top)
(Side)
(Bottom)
(AliExpress Checkout)
(JLCPCB PCB Options)
(JLCPCB PCBA 1)
(JLCPCB PCBA 2)
(JLCPCB PCBA 3)
(JLCPCB Pre-Discounts)
(JLCPCB Final Checkout As Shown On BOM)
NOTE: My name was redacted using the Inspect Element tool as this repository is publically visible. If an unredacted screenshot is required, please DM me or return my project.
(My friend with Blender skills did this and it turned out amazing, so I'm making this my cover image!)
I chose to use the XIAO ESP32-S3 over making a custom ESP32 or RP2040 devboard base for three reasons:
Again, if this cannot be approved for Tier 3 due to a lack of complexity, I understand, and will remove parts to bring the budget down to a Tier 4.
Because it's the cheapest option available for a half-decent snowglobe on AliExpress. The next-cheapest was $7 for two, and I preferred to get six for $6.88.
All of my costs are optimized as much as possible, I'm using AliExpress for my items, and I've done my best to keep it in budget.
JLCPCB has a $10 coupon for PCBA (scroll up to the images section for proof). Said coupon expires in 2 days, and, knowing HCB, it will take more than 2 days to process this grant. If another coupon appears, I will return the difference immediately.
No, no it's not. I know how to use markdown, and I'll even occasionally use an em-dash—like so. That doesn't necessarily mean my README is automatically AI. Zero AI was used in the making of this project, and writing this text-heavy README alone took me two hours. If you need proof, I can provide a screen recording!
That's all, thanks! :D
Please ping or DM me on Slack (@zsharpminor) if you have any questions regarding my project.
Thank you so much for taking your precious time to read all the way through this extremely long README (I wanted to be well documented, okay?!)
You get a massive slice of vanilla cheesecake! :D 🍰
P.S. Happy New Year!!! I worked on this project literally as the clock struck 12 - I have a journal entry to prove it :)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | SK6812MINI | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 10 uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | HDC1080 | Package_SON:Texas_PWSON-N6 | U2 |
| 1 | LOGO | PO:bjk | G*** |
| 1 | SW_SPDT | Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
| 1 | TOUCH | TestPoint:TestPoint_Pad_D4.0mm | TP1 |
| 1 | XIAO-ESP32-S3-DIP | OPL:XIAO-ESP32S3-DIP | U1 |

WillACosta/wlfkbd
The WLF is a 40-key split keyboard (20 keys per half) with a column-staggered matrix and a splayed thumb cluster.

milindmadhukar/keygen
One-off wireless split keyboard: 2 knobs, OLED, trackpad, per-key RGB, ZMK

askiiart/guilty-pad-gay
a macropad thingy that can magnetically attach to a keyboard and interface with it over serial

AdrianR3/Clampinator
Inspired by the ODrive Regen Clamp, the clampinator is a custom built regeneration clamp targeting 16-60V systems.

DEV-ajthedj/Keyboard
A custom RGB keyboard that features three 1D capacitive touch sliders, two joysticks, an OLED screen, a fingerprint sensor, and plenty of macro keys!

freezweb/de.freezweb.heizungssteuerung
Dieses Verzeichnis enthaelt den KiCad-Startentwurf fuer die dezentrale Pumpengruppen-Platine:

h3ll5ur7er/TokenBoard
You wouldn't vibe code a keyboard.. or would you? uses konnect to interact with KiCad and CADence to model the case

KVR-CIBER/sc02-solar-hypercar
SC-02 Solar Hypercar: 3D-printbare Le-Mans-racer op zonne-energie met Pi 4 + ESP32-S3, CadQuery-CAD en three.js-simulatie
It measures 93 × 100 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the SK6812MINI-E and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the newtontriumphant/wingglobe repository on GitHub, at the commit this page was made from: the board is PCB/wingglobe.kicad_pcb and its schematic PCB/wingglobe.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask newtontriumphant before reusing the design.