2 layers

SerialOlfactometerController

neurorishika/SerialOlfactometerController

Copper layers: 2
Thickness: 1.6 mm
Parts: 36
Nets: 37
Pads: 123
Tracks, vias: 267, 0
Pours: 1
Routed: Yes
KiCad: KiCad 9.0 (file 20241229)
Created: 23 Sep 2025
Updated: 24 Sep 2025

Overview

SerialOlfactometerController is an open-source printed circuit board by neurorishika, from the neurorishika/SerialOlfactometerController repository on GitHub. It is a 2-layer board with 36 parts on 37 nets, routed with 267 tracks and 0 vias.

It is built around the TPIC6595N. Its parts include 19 connectors, 7 resistors, 4 capacitors and 2 ICs.

Main components

TPIC6595N
PDIP-20-40℃~+125℃ 1 4.5V~5.5V 8 Open Drain Serial-to-Serial or Parallel TPIC PDIP-20 Shift Registers ROHSTexas InstrumentsShift Registers

Project files

Show this board on your page

https://pcbkit.io/boards/neurorishika/SerialOlfactometerController

The board's own page, for a message or a post.

Source

Repository: neurorishika/SerialOlfactometerController
Board file: SerialOlfactometerController.kicad_pcb
Commit: 137638e
Licence: Not stated

Parts

Qty	Value	Footprint	References
16	Screw_Terminal_01x02	1935310:PHOENIX_1935310	J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13, J14, J15, J16
5	R	Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal	R3, R4, R5, R6, R7
4	MountingHole	MountingHole:MountingHole_3.2mm_M3_DIN965_Pad	H1, H2, H3, H4
2	0.1u	Capacitor_SMD:C_0603_1608Metric	C1, C2
2	10k	Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal	R1, R2
2	10uf	Capacitor_SMD:C_0603_1608Metric	C3, C4
2	TPIC6595	TPIC6B595N:DIP254P762X508-20	U1, U2
2	TST-105-01-X-D	TST-105-01-G-D:SAMTEC_TST-105-01-X-D	J18, J19
1	Conn_01x05_Socket	Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical	J17

Similar boards

2 layers133.4 × 28.4 mm
Controlled generator schematics
alextousss/3d_ultrasonic_scanner
An ultrasonic 3D scanner
56 parts86GPL-3.0
2 layers281.9 × 90.4 mm
SevenSegmentClockV2
atomic14/supersise-seven-segment
The code, schematics and PCB layout are offered here without any support. It's fun project but it's also a learning experience.
100 parts5Unlicense
2 layers100 × 99.9 mm
Panelized
SamWarmuth/SWSplitFlap
3D printable split flap display (software/pcb/STLs), for a more detailed split flap project see https://github.com/scottbez1/splitflap
144 parts4
2 layers220 × 160 mm
K Aries
F6ITU/K_Aries
Aries, an OpenHPSDR ATU (kicad version)
275 parts2
2 layers
SerialOlfactometerController
neurorishika/MultiBiOS
High-precision, hardware-clocked olfactometer control system for behavioral neuroscience
42 partsMIT
2 layers73.7 × 52.1 mm
Shiftysolenoiddriver
pascalscheffers/signalex
Code and PCB for driving Signalex 7 Segment Displays.
14 partsBSD-3-Clause
2 layers
Braillekeyboard
petengenhariabiomedica/Teclado-de-leitura-em-braile
Projeto de tecnologia assistiva voltado para pessoas cegas, consiste em um teclado que reproduzirá palavras da tela de um computador em letras em braile.
231 parts
2 layers97.8 × 38.1 mm
Numitron clock
pierreca/numitron-clock
Simple clock using numitron iv-9 tubes
19 parts

Questions

What parts does the SerialOlfactometerController use?

36 parts, built around the TPIC6595N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SerialOlfactometerController KiCad files?

From the neurorishika/SerialOlfactometerController repository on GitHub, at the commit this page was made from: the board is SerialOlfactometerController.kicad_pcb and its schematic SerialOlfactometerController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SerialOlfactometerController design in my own project?

Its repository states no licence, so its author keeps all rights: ask neurorishika before reusing the design.