
Constant current source
netz39/solder-workspace-lighting
PCBs for illuminating solder workspace.

PCBs for illuminating solder workspace.
Central control is an open-source printed circuit board by netz39, from the netz39/solder-workspace-lighting repository on GitHub. It is a 2-layer board of 27.3 × 36.2 mm with 42 parts on 29 nets, routed with 426 tracks and 93 vias.
It is built around the TPS62175DQC and 24LC64(LX). Its parts include 13 capacitors, 11 connectors, 8 resistors, 3 ICs and 1 switch. It belongs with the STM32 boards of this library.
Created with KiCad 5.1.9
Dieses Repo beinhaltet die drei notwendigen Platinen, um den Lötarbeitsplatz im Netz39 ordentlich auszuleuchten.
Überwacht die Temperatur aller LED-Projektoren und betreibt PWM-Dimming. Desweiteren bietet die Platine mehrere Schnittstellen (UART, SPI, I²C, CAN) für Erweiterungen an
Ein Buck-Converter liefert den voreingestellten konstanten Strom für die LEDs.
Bestückt mit HighPower-LEDs, Thermistor und Kühlkörper.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C3, C5, C9, C10, C11, C12, C13 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R8 |
| 2 | 2k | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_ISO14580 | H1, H2 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 10u | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 24LC64 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | 2u2 16V | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 4k7 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | CAN | Connector_Molex:Molex_PicoBlade_53047-0410_1x04_P1.25mm_Vertical | J11 |
| 1 | Ferrite_Bead_Small | Resistor_SMD:R_0603_1608Metric | FB1 |
| 1 | G*** | extraFootprints:netz39-logo | svg2mod |
| 1 | I2C | Connector_Molex:Molex_PicoBlade_53047-0410_1x04_P1.25mm_Vertical | J4 |
| 1 | PLED0 | Connector_Molex:Molex_PicoBlade_53047-0310_1x03_P1.25mm_Vertical | J5 |
| 1 | PLED1 | Connector_Molex:Molex_PicoBlade_53047-0310_1x03_P1.25mm_Vertical | J7 |
| 1 | PLED2 | Connector_Molex:Molex_PicoBlade_53047-0310_1x03_P1.25mm_Vertical | J6 |
| 1 | PLED3 | Connector_Molex:Molex_PicoBlade_53047-0310_1x03_P1.25mm_Vertical | J8 |
| 1 | POTI | Connector_Molex:Molex_PicoBlade_53047-0310_1x03_P1.25mm_Vertical | J10 |
| 1 | POWER | Connector_Molex:Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical | J1 |
| 1 | SPI | Connector_Molex:Molex_PicoBlade_53047-0510_1x05_P1.25mm_Vertical | J2 |
| 1 | STM32L432KBUx | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U2 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | SW_Push | extraFootprints:PTS636_F-leads | SW1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | TPS62175DQC | Package_SON:WSON-10-1EP_2x3mm_P0.5mm_EP0.84x2.4mm_ThermalVias | U1 |
| 1 | UART | Connector_Molex:Molex_PicoBlade_53047-0410_1x04_P1.25mm_Vertical | J3 |

netz39/solder-workspace-lighting
PCBs for illuminating solder workspace.



MG-5/nixie-clock-hardware
Hardware for controlling six Nixie IN-14 tubes as clock (HH:MM:SS)

MG-5/vfd-clock-hardware
Hardware for controlling six VFD IV-17 tubes as clock (HH:MM:SS)


e-abdi/EK80-Seaglider
Integration of a Simrad EK80 echosounder on a Seaglider: mounting brackets and the noise suppressor interface board.



nykleban/rx5808-video-receiver
Цей репозиторій містить вихідний код прошивки, десктопного додатку та файли проєкту друкованої плати для розумного FPV-приймача.
It measures 27.3 × 36.2 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the TPS62175DQC and 24LC64(LX). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the netz39/solder-workspace-lighting repository on GitHub, at the commit this page was made from: the board is central_control/central_control.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask netz39 before reusing the design.