2 layers54.5 × 20 mm
2 layers
Programator
Nesta2008/myshm- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 82
- Pads
- 193
- Tracks, vias
- 357, 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Apr 2022
- Updated
- 23 Oct 2026
Overview
Programator is an open-source printed circuit board by Nesta2008, from the Nesta2008/myshm repository on GitHub. It is a 2-layer board with 54 parts on 82 nets, routed with 357 tracks and 8 vias.
It is built around the ATTINY2313A-PU and BZX55C3V6. Its parts include 19 resistors, 10 capacitors, 7 crystals and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1k | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R5, R6, R7, R8 |
| 6 | 30 пФ | Capacitor_SMD:C_1206_3216Metric | C1, C2, C4, C5, C8, C9 |
| 6 | 510 | Resistor_SMD:R_1206_3216Metric | R9, R10, R11, R12, R16, R17 |
| 6 | LED | LED_THT:LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O1.27mm_Z4.9mm | VD4, VD5, VD6, VD7, VD10, VD11 |
| 4 | 0.15 | Capacitor_SMD:C_1206_3216Metric | C3, C6, C7, C10 |
| 3 | 1.5k | Resistor_SMD:R_1206_3216Metric | R13, R18, R19 |
| 3 | ATtiny2313A-PU | Package_DIP:DIP-20_W7.62mm | DA1, DA2, DA3 |
| 3 | КД510А | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | VD1, VD2, VD3 |
| 2 | 12 МГц | Crystal:Crystal_HC49-4H_Vertical | ZQ2, ZQ3 |
| 2 | 27 | Resistor_SMD:R_1206_3216Metric | R14, R15 |
| 2 | BZX55C3V6 | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | VD8, VD9 |
| 2 | CONN_2 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | X1, X3 |
| 2 | CONN_2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | X2, X4 |
| 2 | CONN_6 | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | X6, X9 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | 16 МГц | Crystal:Crystal_HC49-4H_Vertical | ZQ1 |
| 1 | CONN_9 | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | X5 |
| 1 | USB_A | Connector_USB:USB_A_CNCTech_1001-011-01101_Horizontal | J1 |
Questions
What parts does the Programator use?
54 parts, built around the ATTINY2313A-PU and BZX55C3V6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Programator KiCad files?
From the Nesta2008/myshm repository on GitHub, at the commit this page was made from: the board is Programator/Programator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Programator design in my own project?
Its repository states no licence, so its author keeps all rights: ask Nesta2008 before reusing the design.
More from Nesta2008/myshm
2- 2 layers
Similar boards
- 2 layers80.2 × 94.6 mm
MANUEL ARGIBAYMOLINA ELECTRONICS
ManuelArgibay/Industrial-I-O-Controller
Industrial 24V I/O controller featuring protected high-side and low-side outputs, multiplexed analog and digital inputs, and MCU-based control.
89 parts - 2 layers
Andes 12hp
niektb/sluisbrinkie-eurorack-published
Published Modules of the Sluisbrinkie project
141 parts34 - 2 layers100 × 62 mm
Magic switchboard
RincewindWizzard/magic-switchboard
A magic schwitchboard is a little box with four switches and four lamps colored in red, green, blue and yellow. The switches have got hats in the same colors.
26 parts18GPL-3.0 - 2 layers70 × 45 mm
- 2 layers85.7 × 50.8 mm
- 4 layers243.8 × 170.2 mm
- 2 layers147.3 × 89.2 mm
UVLampController
GrzegorzewskiSzymon/Controlled-UV-lamp-for-making-PCBs
This project is originally written for ATtiny2313A with external 16MHz oscilator.
54 parts - 2 layers45.7 × 22.2 mm
Reloj Attiny2313A 3492AS
mafdezmoreno/ATtiny2313_Clock_MikroC
DIY Clock. Code. PCB (KiCAD). 3D STL
19 parts